Triumph Herald Steering Column and Fittings

Order your Triumph Herald Steering Column and Fittings ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID005441

Prices displayed in:
Rate and Review this Product
708479
Out of stock, expected soon May 01, 2024. Add to cart and Back Order
£12.00 ex VAT£14.40 inc UK VAT
Quantity
How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
611011
In stock
£3.20 ex VAT£3.84 inc UK VAT
Quantity
3 position

How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
Rate and Review this Product
611013
In stock
£2.60 ex VAT£3.12 inc UK VAT
Quantity
Different length brushes are fitted according to different types of steering wheels. This one is the standard length as fitted to original spec. steering wheels. If a non original steering wheel has been fitted a longer horn brush may be required.

Please measure the brush length before ordering. If a longer horn brush is required; please order part number 142534X.
Qty Req-1, Item Info 2-horn push
Rate and Review this Product
142534
In stock
£9.95 ex VAT£11.94 inc UK VAT
Quantity
Different length brushes are fitted according to different types of steering wheels. This one is longer than that fitted to original spec. steering wheels and may be required if a non original steering wheel has been fitted.

Please measure the length of the brush fitted to your vehicle to ensure you are ordering the correct part. If the standard brush is required; please order part number 142534.
Qty Req-1, Item Info 2-horn push
Rate and Review this Product
142534X
Out of stock, expected soon. Add to cart and Back Order
£18.30 ex VAT£21.96 inc UK VAT
Quantity
A replacement bush, manufactured from a modern plastic bearing material which can operate with much closer tolerances than the original bush could. The new bush is supported by a Superpro polyurethane outer 'tyre' which locates in the outer column in the same way as the original bush.
Qty Req-2, Item Info 2-upper & lower
Rate and Review this Product
209423UR
In stock
£27.50 ex VAT£33.00 inc UK VAT
Quantity
Upper column clamps. Fits between top & bottom clamps.
Qty Req-1, Item Info 2-upper column support
Rate and Review this Product
609639
No longer available
Rate and Review this Product
613466
Out of stock, expected soon Apr 30, 2024. Add to cart and Back Order
£3.30 ex VAT£3.96 inc UK VAT
Quantity
Rate and Review this Product
GHF701
In stock
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Attached with a circular clamp which meant you had to remove the steering column assembly to fit it!
Qty Req-1, Model-Late 1360 Models Only
Rate and Review this Product
2190611
In stock
£72.00 ex VAT£86.40 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"I am ordering from Norway. Dealing with Rimmer Bros is just as easy as doing so within my country!" Customer Comment
Product Description

Triumph Herald Steering Column and Fittings