Triumph Spitfire Outer Column and Fittings - Mk1, Mk2, Mk3, MkIV and Early 1500

Order your Triumph Spitfire Outer Column and Fittings - Mk1, Mk2, Mk3, MkIV and Early 1500 ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID005792

Prices displayed in:
Rate and Review this Product
204741
In stock
Most express orders ship today!
£11.50 ex VAT£13.80 inc UK VAT
Quantity
Different length brushes are fitted according to different types of steering wheels. This one is the standard length as fitted to original spec. steering wheels. If a non original steering wheel has been fitted a longer horn brush may be required.

Please measure the brush length before ordering. If a longer horn brush is required; please order part number 142534X.
Qty Req-1
Rate and Review this Product
142534
In stock
Most express orders ship today!
£9.95 ex VAT£11.94 inc UK VAT
Quantity
Different length brushes are fitted according to different types of steering wheels. This one is longer than that fitted to original spec. steering wheels and may be required if a non original steering wheel has been fitted.

Please measure the length of the brush fitted to your vehicle to ensure you are ordering the correct part. If the standard brush is required; please order part number 142534.
Qty Req-1
Rate and Review this Product
142534X
Out of stock, expected soon. Add to cart and Back Order
£18.30 ex VAT£21.96 inc UK VAT
Quantity
Rate and Review this Product
608462
In stock
Most express orders ship today!
£18.10 ex VAT£21.72 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
209423
In stock
Most express orders ship today!
£5.85 ex VAT£7.02 inc UK VAT
Quantity
A replacement bush, manufactured from a modern plastic bearing material which can operate with much closer tolerances than the original bush could. The new bush is supported by a Superpro polyurethane outer 'tyre' which locates in the outer column in the same way as the original bush.
Qty Req-2
Rate and Review this Product
209423UR
In stock
Most express orders ship today!
£27.50 ex VAT£33.00 inc UK VAT
Quantity
Rate and Review this Product
708479
Out of stock, expected soon May 01, 2024. Add to cart and Back Order
£12.00 ex VAT£14.40 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
611974
Out of stock, expected soon Apr 30, 2024. Add to cart and Back Order
£10.65 ex VAT£12.78 inc UK VAT
Quantity
Rate and Review this Product
510273
In stock
Most express orders ship today!
£0.57 ex VAT£0.68 inc UK VAT
Quantity
Expansion nut for No. 6 self tapping screw and assembly in 21/64" square hole.
Qty Req-2
Rate and Review this Product
FC2803
In stock
Most express orders ship today!
£1.05 ex VAT£1.26 inc UK VAT
Quantity
3 position

How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1, Model-Spitfire Mk1, Mk2 & Mk3
Rate and Review this Product
611013
In stock
Most express orders ship today!
£2.60 ex VAT£3.12 inc UK VAT
Quantity
2 position

How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1, Model-Spitfire MkIV & 1500
Rate and Review this Product
621968
In stock
Most express orders ship today!
£3.60 ex VAT£4.32 inc UK VAT
Quantity
How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
611011
In stock
Most express orders ship today!
£3.20 ex VAT£3.84 inc UK VAT
Quantity
How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
4 out of 5 starsRead 1 Review(s)Rate and Review this Product
611012
In stock
Most express orders ship today!
£2.75 ex VAT£3.30 inc UK VAT
Quantity
Rate and Review this Product
612704U
Only 1 Left
Most express orders ship today!
£21.75 ex VAT£26.10 inc UK VAT
Quantity
Upper column clamps. Fits between top & bottom clamps.
Qty Req-1, Model-Spitfire MkIV & Early 1500
Rate and Review this Product
609639
No longer available
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF200
In stock
Most express orders ship today!
£0.12 ex VAT£0.14 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF331
In stock
Most express orders ship today!
£0.12 ex VAT£0.14 inc UK VAT
Quantity
Locates lower &upper clamps and plate to dash.
Qty Req-2, Model-Spitfire MkIV & 1500
Rate and Review this Product
155086
Usually in stock at our supplier, allow 1 week for delivery
£2.75 ex VAT£3.30 inc UK VAT
Quantity
Rate and Review this Product
WC701121
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF331
In stock
Most express orders ship today!
£0.12 ex VAT£0.14 inc UK VAT
Quantity
Rate and Review this Product
GHF314
In stock
Most express orders ship today!
£0.26 ex VAT£0.31 inc UK VAT
Quantity
Rate and Review this Product
611369
In stock
Most express orders ship today!
£20.25 ex VAT£24.30 inc UK VAT
Quantity
Rate and Review this Product
154833
Usually in stock at our supplier, allow 1 week for delivery
£20.25 ex VAT£24.30 inc UK VAT
Quantity
Rate and Review this Product
PX505
In stock
Most express orders ship today!
£0.73 ex VAT£0.88 inc UK VAT
Quantity
Rate and Review this Product
WP5
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Rate and Review this Product
WL105001
In stock
Most express orders ship today!
£0.26 ex VAT£0.31 inc UK VAT
Quantity
Rate and Review this Product
HN2005
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Mk1, Mk2 & Mk3.Use only when locking type column fitted up to FD75000.
Qty Req-1, Model-Spitfire Mk1, Mk2 & Mk3
Rate and Review this Product
621332
No longer available
Fitted as standard to all MkIV & early 1500's.Also fitted to late Mk3 USA spec vehicles with full width dash.
Qty Req-1
Rate and Review this Product
154977
No longer available
Rate and Review this Product
608222
In stock
Most express orders ship today!
£2.25 ex VAT£2.70 inc UK VAT
Quantity
Rate and Review this Product
608223
In stock
Most express orders ship today!
£4.45 ex VAT£5.34 inc UK VAT
Quantity
Spanner size 3/4 AF
Hexagon Headed
28tpi
US Grade 5
Metric Grade 8.8
Qty Req-2
Rate and Review this Product
SH604041
In stock
Most express orders ship today!
£0.43 ex VAT£0.52 inc UK VAT
Quantity
Rate and Review this Product
GHF314
In stock
Most express orders ship today!
£0.26 ex VAT£0.31 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF331
In stock
Most express orders ship today!
£0.12 ex VAT£0.14 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF200
In stock
Most express orders ship today!
£0.12 ex VAT£0.14 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF331
In stock
Most express orders ship today!
£0.12 ex VAT£0.14 inc UK VAT
Quantity
Rate and Review this Product
WC701121
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Rate and Review this Product
GHF117
In stock
Most express orders ship today!
£0.38 ex VAT£0.46 inc UK VAT
Quantity
Rate and Review this Product
WC701121
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF331
In stock
Most express orders ship today!
£0.12 ex VAT£0.14 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF200
In stock
Most express orders ship today!
£0.12 ex VAT£0.14 inc UK VAT
Quantity
Rate and Review this Product
613466
Out of stock, expected soon Apr 30, 2024. Add to cart and Back Order
£3.30 ex VAT£3.96 inc UK VAT
Quantity
Rate and Review this Product
YZ3405
In stock
Most express orders ship today!
£0.43 ex VAT£0.52 inc UK VAT
Quantity
Rectangular flat nut for No. 8 screw
Qty Req-2
Rate and Review this Product
GHF701
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Rate and Review this Product
147278
In stock
Most express orders ship today!
£108.00 ex VAT£129.60 inc UK VAT
Quantity
2 position

TR6 comm no CP series cars are fitted with a floor mounted, foot operated headlamp dip/main beam change-over switch.
All TR6s after comm no CR1 had the headlamp dip on the lighting switch mounted on the steering column.

Wiring for this varies from the original wiring colours and is as follows:

- Brown Wire is power to Flash Feature
- Red Wire is power in to High / Low Beam
- Blue Wire is power out to Low Beam
- White Wire is power out to High Beam
Qty Req-1, Model-Spitfire MkIV & 1500
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
152616
In stock
Most express orders ship today!
£67.00 ex VAT£80.40 inc UK VAT
Quantity
Rate and Review this Product
158966P
In stock
Most express orders ship today!
£45.00 ex VAT£54.00 inc UK VAT
Savings:14%
£38.90 ex VAT£46.68 inc UK VAT
Quantity
Positive + : Wire Color Blue/ Red
Turn Left: Negative -: Wire color Green/Orange
Turn Right: Negative -: Wire color Green/White

New Line - Lucas Brand - The brand's famous green boxes have been a familiar feature of garages across the globe for decades. That’s because Lucas have always provided the parts that mechanics trust and keep close at hand to get the job done. It’s still true today. The Lucas portfolio covers premium quality products for automotive, motorcycle and home use.

Lucas products are driven by engineering excellence and a spirit of innovation that’s ensured our continued global success. The brand's reputation is built on an extensive range, exceptional technical durability and endurance, and outstanding quality.

Lucas has been providing all this for over 135 years - and we’re still growing. That’s why the brand has been continuously trading longer than any other automotive component brand in the world.
Qty Req-1
4 out of 5 starsRead 1 Review(s)Rate and Review this Product
158966PLUCAS
In stock
Most express orders ship today!
£47.00 ex VAT£56.40 inc UK VAT
Quantity
Rate and Review this Product
147280
Out of stock, expected soon Apr 25, 2024. Add to cart and Back Order
£41.50 ex VAT£49.80 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
147281
In stock
Most express orders ship today!
£37.50 ex VAT£45.00 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Great site, generally has all the info required about items to be able to positively order something." Customer Comment
Product Description

Triumph Spitfire Outer Column and Fittings - Mk1, Mk2, Mk3, MkIV and Early 1500
1500 only to FH100020

Review: Matthew Goninon Submitted: 03/07/2020

Overall4 out of 5 stars.
verified

Subject
Good quality

Did this item work well with your project? What vehicle type are you using this for?
There is white printing on the black cover on the shaft, and it has puckered up when the knob has been pushed on. Shoulb able to rectify though. Part for 1968 13/60 Estate.