Triumph Stag Tools

Order your Triumph Stag Tools ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID006079

Prices displayed in:
Use to remove GWP206 or GWP207 (Stag, TR7, Dolomite Sprint water pumps)
-
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
RB7009
In stock
Most express orders ship today!
£9.85 ex VAT£11.82 inc UK VAT
Quantity
Use to remove GWP206 or GWP207 (Stag, TR7, Dolomite Sprint water pumps)
-
Rate and Review this Product
RB7009PRO
Out of stock, expected soon. Add to cart and Back Order
£71.50 ex VAT£85.80 inc UK VAT
Quantity
Swivel wrench with plastic coated T handle.
Socket forged steel hardened, tempered and chrome plated with
rubber insert for spark plug insulator protection and retention.
Universal jointed for enhanced access.
-
Rate and Review this Product
GAT140
In stock
Most express orders ship today!
£7.25 ex VAT£8.70 inc UK VAT
Quantity
Probably the trickiest aspect of clutch replacement is the fact that the clutch driven plate must be exactly centred on the flywheel when the clutch cover is fastened over it. This must be done to ensure that the gearbox input shaft mates correctly with both the driven plate and the spigot bush in the tail of the crankshaft. The result of clutch plate misalignment is the gearbox's stubborn inability to clamp up flush to the back of the engine when reassembly is attempted. A clutch alignment tool will take the guesswork out of trying to centre the clutch driven plate.
Most alignment tools are of a universal type. The item listed here is manufactured as a plastic replica of a TR gearbox input shaft - there is no more accurate way of aligning your clutch other than using a real 'spare' input shaft!
Having secured a new clutch to the flywheel, and before refitting the gearbox to the engine, a very light coating of copper grease should be applied to the splines (having wire brushed and cleaned them first) and spigot end of the gearbox input shaft.
-
Rate and Review this Product
RX1389
In stock
Most express orders ship today!
£7.05 ex VAT£8.46 inc UK VAT
Quantity
This revolutionary tool makes quick work of accurately aligning the clutch and pressure plate before fitting. Fits most vehicles up to 5 tons except vehicles with double plate clutches. Body manufactured from ABS with brassed screw and supplied with three collets. A full instruction leaflet is included with each tool. Display packed.
-
Rate and Review this Product
RX1702
In stock
Most express orders ship today!
£15.40 ex VAT£18.48 inc UK VAT
Quantity
This coil spring compressor uses twin prongs and works at a pressure up to 1100kg. Care should be taken to increase pressure equally on both sides. Additional Information
  • Twin prongs for better grip.
  • Maximum load 1100kgs.
  • Maximum extension 235mm.
  • Always follow safety precautions.
  • Wear eye protection.
-
Rate and Review this Product
RX1328B
In stock
Most express orders ship today!
£44.00 ex VAT£52.80 inc UK VAT
Quantity
For mating Male and Female poppers on hood and tonneau covers.
-
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
RX1342
In stock
Most express orders ship today!
£5.30 ex VAT£6.36 inc UK VAT
Quantity
Designed to be used together to ensure both sides of the eyelet are correctly riveted, the 77157 Riveting Tool has been machined to ensure a good tight and neat fit.
-
Rate and Review this Product
RX1384
In stock
Most express orders ship today!
£26.25 ex VAT£31.50 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
RX1562
In stock
Most express orders ship today!
£22.25 ex VAT£26.70 inc UK VAT
Quantity
This Oil Filter removal tool, for the spin-on type oil filters, up to a diameter of 120mm.

Designed to be used with a 1/2" ratchet, power bar, extension bar or 21mm spanner.

Wide nylon webbing strap (25mm) for increased grip.

Adjustment head manufactured from durable carbon steel in a satin finish.

A simple, cost-effective solution for removing stubborn - stuck oil filters.
-
Rate and Review this Product
RX1514
In stock
Most express orders ship today!
£8.70 ex VAT£10.44 inc UK VAT
Quantity
120cm x 63cm x 1cm Galvanized steel tray, easily wiped clean.
Trays can also be used on benches to clean engine parts or gearboxes to contain fluids or to catch bearings and errant springs.
-
Rate and Review this Product
GAC9905X
In stock
Most express orders ship today!
£36.00 ex VAT£43.20 inc UK VAT
Quantity
Size: 24" x 18" x 3/4" (609mm x 457mm x 19mm).
Manufactured from Plastic.
Pouring spout in corner.
Protect your drive and garage floors from oil drips.
Also useful when transferring fluids to avoid workshop floor contamination.
-
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GAC9905XPL
Out of stock, expected soon Apr 30, 2024. Add to cart and Back Order
£6.10 ex VAT£7.32 inc UK VAT
Quantity
Large heavy-duty drip tray manufactured from 2mm thick pressed stainless steel, embossed with the Laser logo and a fully polished finish. Exceptionally tough and strong the tray has excellent resistance to rust, stains, chemicals and corrosion and the base has a 30mm wide channel round the edge for easier pouring. The low profile tray is just 48mm deep, slim enough to slip under the lowest sports car and can also be used with oil absorption pads, please see Part nos. 5712 & 5713. Easy to clean, the tray can tolerate high temperatures so it can be sterilised with heat, making it also suitable for home and kitchen use.

Tray size 600mm x 400mm x 48mm deep.
Stainless steel construction offers excellent resistance to rust, stains, chemicals and corrosion.
Durable Type 201 stainless steel, robust 2mm thickness & an easy-clean polished finish.
Low profile drip tray. Can be used with Laser Absorption Pads.
-
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GAC9905XSS
In stock
Most express orders ship today!
£15.90 ex VAT£19.08 inc UK VAT
Quantity
Not suitable for Land Rover applications (see RX1222LRRR).
-
5 out of 5 starsRead 2 Review(s)Rate and Review this Product
RX1222TMG
In stock
Most express orders ship today!
£12.90 ex VAT£15.48 inc UK VAT
Quantity
For efficient priming of the oil pump before initial start-up.
Priming tool engages with the oil pump shaft through the distributor apeture in the timing cover (requires removal of distributor). Oil pump can then be primed using an electric/cordless drill. No need for petroleum jelly!
Nb. with the rocker covers removed, a visible oil supply to the rocker gear is confirmation that the system is primed.
-
Rate and Review this Product
RX1431E
In stock
Most express orders ship today!
£32.25 ex VAT£38.70 inc UK VAT
Quantity
For efficient priming of the oil pump before initial start-up.
Priming tool engages with the oil pump shaft through the distributor apeture in the timing cover (requires removal of distributor). Oil pump can then be primed using an electric/cordless drill. No need for petroleum jelly!
Nb. with the rocker covers removed, a visible oil supply to the rocker gear is confirmation that the system is primed.
-
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
RX1431L
In stock
Most express orders ship today!
£28.50 ex VAT£34.20 inc UK VAT
Quantity
Draper 500cc Grease Gun is a lever action gun for use with standard grease gun cartridges and bulk.  Supplied complete with delivery tube, connector with 1/8" BSPT thread and pressure relief valve.  Safe working pressure 55MPa (8000psi).
-
Rate and Review this Product
RX1423
In stock
Most express orders ship today!
£21.50 ex VAT£25.80 inc UK VAT
Quantity
Includes Compact, short Trolley jack. Portable and compact design for easy storage. Large saddle aids positioning. Rear swiveling steel castors increases manoeuvrability. Safety valve prevents the jack from overloading. Supplied with a one piece handle Plus Ratcheting Axle Stands, 2 Tonne (Pair) Ratchet - type action. Large saddle (36 x 85mm).
-
Rate and Review this Product
RX1651
In stock
Most express orders ship today!
£80.00 ex VAT£96.00 inc UK VAT
Quantity
There's something about a proper leather tool bag that just adds to the classic car experience. New to the Gunson range is this beautiful classic leather example, generously sized, strong and robust, and a perfect addition to any classic car enthusiast's collection.
The approximate size is 150 x 145 x 380mm and it is made from heavy duty leather with stitched and metal riveted seams. The bag is secured with three straps and high quality buckles and features an adjustable shoulder strap.
Classic car owners will find this indispensable for keeping all those essential tools tidy and safe.
  • Classic style leather tool bag
  • Approx size 150mm x 145mm x 380mm
  • Heavy duty oiled leather with studded trim
  • Three buckle straps plus shoulder strap
  • Ideal for classic car owners
-
Rate and Review this Product
RX1856
In stock
Most express orders ship today!
£53.00 ex VAT£63.60 inc UK VAT
Quantity
Applications:
Discovery 1
Discovery 2
Discovery 3
Discovery 4
Freelander

24 pieces including 16 individually sized adaptors, pressure testing pump with gauge, 2 connectors for use with no. 3 adaptor and handle.
Suitable for a large range of vehicles.
Thermometer included.
Also checks the leakage on original radiator cap.
-
Rate and Review this Product
RX1829
Usually in stock at our supplier, allow 1 week for delivery
£335.00 ex VAT£402.00 inc UK VAT
Quantity
This system sets the standard for affordable brake and clutch bleeding systems.
Using air pressure from a spare wheel it will effortlessly bleed hydraulic systems.

Suitable for one man operation.

The Eezibleed kits contains a special pressure vessel to hold the new fluid, spare bottle seal part number G4062/80.

Can be used successfully on the following systems:
Tandem master cylinders without sensors
Tandem reservoirs
Slave servos
Vacuum servos

Easy to follow instructions.

Kit includes:
bottle
5x rubber seals
cap assembly with tyre connector
3x hoses: 3.5mm inner diameter x 303mm, 5.4mm inner diameter x303mm, 5.4 inner diameter x 183mm
4 x plastic caps 25, 27, 44/45 & 46mm

For alternative cap sizes, use universal cap assembly part no. RX2081
-
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
RX1855
In stock
Most express orders ship today!
£28.00 ex VAT£33.60 inc UK VAT
Quantity
Absorbs Oil only (not water)
Plastic Film backing for floor protection 100% Polypropylene
1000mm x 800mm x 2mm (including film)
Weight: 50gms
Absorbency 2.6L per mat
-
Rate and Review this Product
RX1857
In stock
Most express orders ship today!
£5.30 ex VAT£6.36 inc UK VAT
Quantity
A must have tool for any Triumph owner. One end fits the brake adjusters, the other fits the drain and filler plugs on the engine, gearbox and differential.
-
Rate and Review this Product
RX1643
In stock
Most express orders ship today!
£22.75 ex VAT£27.30 inc UK VAT
Quantity
Not only for use with you classic Triumph or MG, but also with a variety of modern vehicles including Ford, Rover & Vauxhall/Opel.

Additional Information
  • 1/4" Sq x 5/16" open ended
  • Essential service tool
  • For use with a variety classic & modern vehicles
  • Chrome plated
  • Correctly hardened
-
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
RX1643B
In stock
Most express orders ship today!
£6.15 ex VAT£7.38 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"The website is very clear - simple to use. The online help is invaluable as sometimes the parts combinations are not so clear with my limited but growing knowledge of car maintenance." Customer Comment
Product Description

Triumph Stag Tools