Terrafirma Air to Coil Conversion Kits
The EAS or Electronic Air Suspension systems fitted to P38 Range Rovers and the rear of the Discovery 2 can be expensive to repair and not especially reliable when heavily laden. Replacement coil spring conversions offer a reliable and economical repair or upgrade. When fitted with the relevant coil springs, significantly increased load carrying can be achieved.
All P38 Range Rovers manufactured between 1995 to 2002 were fitted with air suspension, at the time this system was regarded as state of the art and offered high levels of comfort and the ability to self-level when loaded or when towing. The P38 has generally stood the test of time and as with all Land Rovers, has a loyal band of supporters keeping them roadworthy and in good shape. The cost of repairing sophisticated systems can sometimes become unviable but with the Terrafirma Air to Coil conversion kit all the potential expense is dealt with in one go. The coil springs have been developed to match the standard ride height and load carrying characteristics of the air suspension in standard mode, also available is an HD package giving a 1 inch lift and a greater capacity for increased load.
The kit includes fitting instructions, everything necessary to isolate the electronics, eliminate unwanted dash lights and all the hardware required to convert from air springs to coil springs.
It is recommended that new Terrafirma shocks are also fitted for best results so for your convenience additional part numbers have been produced that include shock absorbers.
The Discovery 2 only has air suspension fitted to the rear, primarily to provide self-levelling for carrying additional load and for towing. It's limitations are easily reached when heavily loaded hitting bumps and pot holes. Air bags can burst leaving the vehicle sitting on its bump stops miles from home. It is standard practice to remove the air suspension and fit heavy load coil springs when preparing Discovery 2's for expedition purposes.
The Terrafirma Discovery 2 Air to Coil conversion kits are simpler than the P38 and several load carrying options are available to suit different applications.