Triumph TR6 Clutch Consumables

Order your Triumph TR6 Clutch Consumables ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767

Part No.: GRID600019

Videos
Images

Prices displayed in:

VAT & Exchange Rates

Rate It

Delphi Lockheed Brake and Clutch Fluid - DOT 3 - 1L Synthetic - GBF103 - TRW

This is a synthetic brake fluid. Do not mix with mineral brake fluid.

Rate and Review this Product

GBF103

In stock

Most orders placed now ship tomorrow!

Save for Later Price Match

£7.60 ex VAT£9.12 inc UK VAT

Quantity

Red Rubber Grease Sachet - 50gms - 514578P

Rate and Review this Product

514578P

In stock

Most orders placed now ship tomorrow!

Save for Later

£1.95 ex VAT£2.34 inc UK VAT

Quantity

Silicone Brake or Clutch Fluid - DOT 5 - 500ml - RX1327 - Automec

Unlike standard, glycol based, clutch/brake fluid, Automec DOT 5 - silicone fluid is non - hygroscopic which means it does not absorb moisture. This will help prevent corrosion in the system and, under heavy braking conditions, it tends not to boil. Also, it won't harm paintwork if spilt.

NOTE; It is completely safe to mix Automec DOT 5 silicone clutch/brake fluid with standard, Glycol based, clutch/brake fluid. However, in order to obtain the maximum performance benefits, it is best to drain the brake system and refill with Automec Dot 5 silicone fluid.
A 1 litre bottle is usually sufficient to replace the fluid in most vehicles. Use the 500ml bottles for topping up.

Rate and Review this Product

RX1327

In stock

Most orders placed now ship tomorrow!

Save for Later Price Match

£24.00 ex VAT£28.80 inc UK VAT

Quantity

Silicone Brake or Clutch Fluid - DOT 5 - 1 Litre - RX1326 - Automec

Unlike standard, glycol based, clutch/brake fluid, Automec DOT 5 - silicone fluid is non - hygroscopic which means it does not absorb moisture. This will help prevent corrosion in the system and, under heavy braking conditions, it tends not to boil. Also, it won't harm paintwork if spilt.

NOTE; It is completely safe to mix Automec DOT 5 silicone clutch/brake fluid with standard, Glycol based, clutch/brake fluid. However, in order to obtain the maximum performance benefits, it is best to drain the brake system refill with Automec Dot 5 silicone fluid.
A 1 litre bottle is usually sufficient to replace the fluid in most vehicles. Use the 500ml bottles for topping up.

Rate and Review this Product

RX1326

In stock

Most orders placed now ship tomorrow!

Save for Later Price Match

£41.50 ex VAT£49.80 inc UK VAT

Quantity

Loctite Stud N Bearing Fit (3Ml) - GAC100

Your Benefits

Suitable for all metal fasteners, including stainless steel, aluminium, plated surfaces and chrome-free coatings
Tolerates slight contaminations of industrial oils, e.g. engine oils, corrosion prevention oils, cutting fluids
Ideal for permanently locking studs on engine blocks and pump housings
To be used if regular removal for maintenance is not required
P1 NSF Reg. No.: 123006

Technical Data

Maximum thread size: Up to M20
Strength: High
Breakaway torque M10 bolts: 33 Nm
Fixture time steel: 10 min.
Fixture time brass: 10 min.
Fixture time stainless steel: 150 min.
Service temperature range: -55°C - +180 °C

Restricted Item

Due to the hazardous nature of this item, it cannot be exported.

We can ONLY ship via UPS Carrier to England, Scotland & Wales, mainland destinations only - NO ISLANDS. )

This item CANNOT be sent by air or via the Royal Mail.

A Minimum Carriage Charge of £7.95 will apply.

Only Available for Delivery by UPS to Mainland United Kingdom Destinations

Rate and Review this Product

GAC100

This part has been superseded

Save for Later Price Match

Use RX2185

Stud Adhesive 50ml - RX2185

50ml - High strength adhesive for locking studs into engine block, cylinder heads, differential or gearbox housings.

Rate and Review this Product

RX2185

Out of stock, expected soon. Add to cart and Back Order

Save for Later Price Match

£11.70 ex VAT£14.04 inc UK VAT

Quantity

Loctite Stud N Bearing Fit (24Ml) - GAC10024ML

Technical Data:
Maximum thread size: Up to M20
Strength: High
Breakaway torque M10 bolts: 26Nm
Fixture time steel: 10 min.
Fixture time brass: 5 min.
Fixture time stainless steel: 15 min.
Service temperature range: -55°C - +150°C
Pack sizes: 5ml, 24ml, 50ml

Restricted Item

Due to the hazardous nature of this item, it cannot be exported.

We can ONLY ship via UPS Carrier to England, Scotland & Wales, mainland destinations only - NO ISLANDS. )

This item CANNOT be sent by air or via the Royal Mail.

A Minimum Carriage Charge of £7.95 will apply.

Only Available for Delivery by UPS to Mainland United Kingdom Destinations

Rate and Review this Product

GAC10024ML

This part has been superseded