Triumph TR6 Escutcheons, Decals and Switches

Order your Triumph TR6 Escutcheons, Decals and Switches ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID600183

Prices displayed in:
Rate and Review this Product
708479
Out of stock, expected soon May 01, 2024. Add to cart and Back Order
£12.00 ex VAT£14.40 inc UK VAT
Quantity
Rate and Review this Product
708479
Out of stock, expected soon May 01, 2024. Add to cart and Back Order
£12.00 ex VAT£14.40 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
611974
Out of stock, expected soon Apr 30, 2024. Add to cart and Back Order
£10.65 ex VAT£12.78 inc UK VAT
Quantity
66
Expansion nut for No. 6 self tapping screw and assembly in 21/64" square hole.
Qty Req-2
Rate and Review this Product
FC2803
In stock
Most orders placed now ship tomorrow!
£1.05 ex VAT£1.26 inc UK VAT
Quantity
67
How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
4 out of 5 starsRead 1 Review(s)Rate and Review this Product
611012
In stock
Most orders placed now ship tomorrow!
£2.75 ex VAT£3.30 inc UK VAT
Quantity
68
How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
611011
In stock
Most orders placed now ship tomorrow!
£3.20 ex VAT£3.84 inc UK VAT
Quantity
69
3 position - off/side/main

How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1, Model-to Comm No CR1
Rate and Review this Product
611014
In stock
Most orders placed now ship tomorrow!
£2.35 ex VAT£2.82 inc UK VAT
Quantity
70
3 position

How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1, Model-to Comm No CR/CF1
Rate and Review this Product
611013
In stock
Most orders placed now ship tomorrow!
£2.60 ex VAT£3.12 inc UK VAT
Quantity
Rate and Review this Product
621967
In stock
Most orders placed now ship tomorrow!
£2.05 ex VAT£2.46 inc UK VAT
Quantity
72
2 position

How to Apply

To apply correctly you will need the following: tape, tape measure, squeegee, or old credit card. (A spray bottle with Windex or mildly soapy water).
  1. Take measurements from your old decal to place it in the same/correct area.
  2. Clean the area, remove all wax and the old decal.
  3. Without removing the backing paper, position the decal where you want it and place a continuous piece of masking tape along the top edge of the decal to hold it in place. Double check to be sure it's lined up the way you want it.
  4. Lift up the decal (or one segment of the decal), being careful not to undo the tape at the top and starting from the top peel about half the backing paper away from the transfer paper and vinyl letter. Use the squeegee/credit card to lay it flat against the car working slowly and carefully from the top to the bottom removing the rest of the backing paper as you go. Use extra care as you lay the letter over any creases to be sure the decal doesn't gap over the crease.
  5. Once all the segments have been applied you can remove all the tape and transfer paper.
Optional, some customer like to have a little wiggle room and apply a very small amount of Windex or soapy water to the area. This can give you a second chance on moving the decal, but you will need to move quickly because this can soak the other transfer paper.
Qty Req-1, Model-from Comm No CR/CF1
Rate and Review this Product
621968
In stock
Most orders placed now ship tomorrow!
£3.60 ex VAT£4.32 inc UK VAT
Quantity
Rate and Review this Product
142579
In stock
Most orders placed now ship tomorrow!
£60.50 ex VAT£72.60 inc UK VAT
Quantity
Rate and Review this Product
159358
In stock
Most orders placed now ship tomorrow!
£80.00 ex VAT£96.00 inc UK VAT
Quantity
73
2 position

TR6 comm no CP series cars are fitted with a floor mounted, foot operated headlamp dip/main beam change-over switch.
All TR6s after comm no CR1 had the headlamp dip on the lighting switch mounted on the steering column.

Wiring for this varies from the original wiring colours and is as follows:

- Brown Wire is power to Flash Feature
- Red Wire is power in to High / Low Beam
- Blue Wire is power out to Low Beam
- White Wire is power out to High Beam
Qty Req-1, Model-from Comm No CR/CF1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
152616
In stock
Most orders placed now ship tomorrow!
£67.00 ex VAT£80.40 inc UK VAT
Quantity
Rate and Review this Product
158966P
In stock
Most orders placed now ship tomorrow!
£45.00 ex VAT£54.00 inc UK VAT
Savings:14%
£38.90 ex VAT£46.68 inc UK VAT
Quantity
74
Positive + : Wire Color Blue/ Red
Turn Left: Negative -: Wire color Green/Orange
Turn Right: Negative -: Wire color Green/White

New Line - Lucas Brand - The brand's famous green boxes have been a familiar feature of garages across the globe for decades. That’s because Lucas have always provided the parts that mechanics trust and keep close at hand to get the job done. It’s still true today. The Lucas portfolio covers premium quality products for automotive, motorcycle and home use.

Lucas products are driven by engineering excellence and a spirit of innovation that’s ensured our continued global success. The brand's reputation is built on an extensive range, exceptional technical durability and endurance, and outstanding quality.

Lucas has been providing all this for over 135 years - and we’re still growing. That’s why the brand has been continuously trading longer than any other automotive component brand in the world.
Qty Req-1, Model-RHD & LHD
4 out of 5 starsRead 1 Review(s)Rate and Review this Product
158966PLUCAS
In stock
Most orders placed now ship tomorrow!
£47.00 ex VAT£56.40 inc UK VAT
Quantity
Rate and Review this Product
TP402
In stock
Most orders placed now ship tomorrow!
£0.55 ex VAT£0.66 inc UK VAT
Quantity
77
Fits on right hand side of column.
Qty Req-1
Rate and Review this Product
147280
Out of stock, expected soon. Add to cart and Back Order
£41.50 ex VAT£49.80 inc UK VAT
Quantity
77
Fits on left hand side of column
Qty Req-1
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
147281
In stock
Most orders placed now ship tomorrow!
£37.50 ex VAT£45.00 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
609792
In stock
Most orders placed now ship tomorrow!
£9.15 ex VAT£10.98 inc UK VAT
Quantity
Rate and Review this Product
718813
In stock
Most orders placed now ship tomorrow!
£50.50 ex VAT£60.60 inc UK VAT
Quantity
Rate and Review this Product
WP5
In stock
Most orders placed now ship tomorrow!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Rate and Review this Product
HN2005
In stock
Most orders placed now ship tomorrow!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"Very easy site to navigate, identify & select replacement parts for my Rover 75 V6 car, very reasonable prices and postage costs to Australia. a pleasure to Deal with Rimmer Bros" Customer Comment
Product Description

Triumph TR6 Escutcheons, Decals and Switches