1983 Onwards
|
|
|
|
Land Rover 90-110 Defender Accessories
1983 Onwards |
|
Page Contents
Bike Carrier, Spare Wheel Carrier & Trailer Boards
Hiclone Performance Enhancement
Power Source Inverter Kenlowe Engine Hot Start & Interior Pre-Heater System
Rollover Protection Bars
Styling Upgrades
Nudge Bars
'A' Bars
Lamp Guards
Side Steps
Rear Steps
Bumperettes
Roof Racks
Luggage Box
Spare Wheel Covers
Bike Carrier, Spare Wheel Carrier & Trailer Boards
Chequer Plate
Mudflaps
Door Wind Deflectors
Soft Tops & Tonneau Cover
Radiator Muff
Hiclone Performance Enhancement
Powerbox Diesel Engine Tuning
Auxiliary Lamps
Power Source Inverter
Mobile Fridge/Travel Cooler
Kenlowe Engine Hot Start & Interior Pre-Heater System
Kenlowe Fan
Vehicle Security
Battery Conditioner
Interior Enhancements
Sound Proofing Kit
Cubby Box
Footwell Mats
Loadspace Liner/Mat
Waterproof Seat Covers
Window Mesh
Dog Guard
Off Roading Accessories
Winches
Underside Protection
Towing Accessories
Heat Protection & Insulation
Steering Wheels
Lumenition Electronic Ignition Kit
Reference/Information Books
Videos/DVD
Tools
Lubricants & Fluids
Workshop Consumables
Roadside Equipment
Body Care
Advertising Prints
General Items
Aerosol Paints & Touch-In Crayons
Rollover Bar;
Standard Soft Top Models - (1) - RRC3264
90 Sport & Eastnor LE -
Main Rollover Bar - (1) - STC7014
Diagonal Bar
RH - (1) - ALR7822
LH - (1) - ALR7823
Fixings - rollover bar;
Standard Models -
Nut Plate - (2) - MTC5519
Bolt - main bar - (8) - BH110301L
Bolt - diagonal bar to body - (8) - BH110261L
90 Sport & Eastnor LE -
Nut Plate - (2) - MTC5519
Screw (M10 x 25) - (12) - ALR6871
Bulkhead Removal Bar - (1) - LL1196
This bar replaces the centre bulkhead on 90" models,
giving better front-to-rear access and more front legroom.
Front External Bar - (1) - LL1195
Suitable for all models, this is an aesthetic enhancement which bolts to the vehicle’s bodywork, giving an aggressive appearance.
Also suitable for mounting spotlights.
XS-Style Headlamp Surround;
Silver finished plastic with horn apertures.
RH - (1) - DHH100780LQV
LH - (1) - DHH100790LQV
XS-Style Bumper - (1) - LL1206
Brushed stainless steel.
Clear Indicators - (2) - XBD100670
Clear Side Repeaters;
Up to 1998 - (2) - XGB000020
1998 on - (2) - XGB100310L
Nudge Bar;
All are black nylon coated, include mountings for spotlights and are suitable for all vehicles, including air conditioned.
For Mounting to Standard Bumper -
Wraparound Nudge Bar
With Integral Lamp Guards - (1) - LL1198
Without Lamp Guards - (1) - LL1199
Flat Nudge Bar
With Integral Lamp Guards - (1) - LL1200
Without Lamp Guards - (1) - LL1201
Fold-Down Type - (1) - LL1202
Hinged to fold down flat. Includes integral lamp guards.
For Mounting to Winch Bumper -
Without Lamp Guards - (1) - LL1203
LL1198
LL1200
LL1202
LL1230
'A' Bar;
For Standard Bumper -
2" diameter. Fits to existing bumper mounting holes but requires 4 x extra holes to be drilled in the bumper for mounting.
Suitable for vehicles with air con. Includes mountings for spotlights.
Black Nylon Coated - (1) - LL1125
Polished Stainless Steel
With Cross Brace - (1) - LL1125SS
Plain - (1) - LL1312
For Winch Bumper -
Black Nylon Coated - (1) - LL1197
LL1125SS
LL1312
LL1197
Lamp Guards;
Sold as pairs.
Front -
Fixed - (1) - 345985
Wire mesh guards, complete with fittings.
Hinged - (1) - RTC8969
Rear - except HICAP -
Fixed - (1) - RTC8064
Individual mesh lamp guards.
Hinged
With Rear-Mounted Spare - (1) - RTC8860AA
Without Rear-Mounted Spare - (1) - RTC8859AA
Rear - HICAP Pickup - (1) - LL1204
Lamp Guard Set;
High quality aftermarket front and rear lamp guard set.
Front guards are hinged. Available in black nylon coated finish or stainless steel.
Please note, not suitable for use with swingaway spare wheel carrier.
Black Nylon Coated - (1) - LL1205
Stainless Steel - (1) - LL1205SS
Headlamp Protectors - acrylic - (1) - STC7561
All models - pair.
Side Step;
Stirrup Type (each) - (ar) - MTC2138AA
Folding Step Type (each) - (ar) - STC7631
Running Board Type -
90
Black (pair) - (1) - STC8438AA
Stainless Steel (pair) - (1) - STC50141
Chequer Plate (pair) - (1) - LL1257
Aftermarket side steps with black nylon coated, tubular steel edge and chequer plate tread plate.
Tomb Raider
RH - (1) - STC61858
LH - (1) - STC61859
Raider Bar (pair) - (1) - LL1313
Tube style aftermarket side steps, black nylon coated, with chequer plate top edge.
110
Black (pair) - (1) - STC8015AA
Stainless Steel (pair) - (1) - LL1258
Aftermarket side steps.
Chequer Plate (pair) - (1) - LL1259
Aftermarket side steps with black nylon coated, tubular steel edge and chequer plate tread plate.
Tomb Raider
RH - (1) - STC61860
LH - (1) - STC61861
Raider Bar (pair) - (1) - LL1314
Tube style aftermarket side steps, black nylon coated, with chequer plate top edge.
Bracket - support - folding step - (ar) - MXC1624
Rear Step;
Folding Type - (1) - STC7632
Retractable - (1) - MTC3085
Tow Bar-Mounted - (1) - LL1256
Heavy gauge, plated steel. Bolts directly to crossmember.
Fixed, Full-Width Type (less tread plate) -
Defender 50/Tomb Raider 90 - (1) - STC50269AA
Tomb Raider 110 - (1) - STC50301
Tread Plate - fixed rear step;
Chequer plate.
50th Anniversary - (1) - STC60168
Tomb Raider - (1) - STC61868
Bumperette;
Front - galvanised - (2) - RTC4769
Rear -
RH - (1) - RRC2970
LH - (1) - RRC2971
Tubular Bumperettes;
Heavy duty 1" tube construction and supplied complete with brackets for mounting in place of the grab handles.
Supplied in 3 finishes: black nylon coated, galvanised or stainless steel.
Please note, will not fit with swingaway spare wheel carrier.
Black Nylon Coated - (1) - LL1212BLACK
Galvanised - (1) - LL1212GAL
Stainless Steel - (1) - LL1212SS
Roof Rack - OE;
Full Roof Rack Type -
0.8 Metre - (1) - STC53014
1.6 Metre - (1) - RTC8161A
2.4 Metre - (1) - RTC8141A
Ladder Rack Type - (ar) - RTC8131A
Supplied individually.
Rood Rack - aftermarket;
Tubular Stainless Steel - (1) - LL1213
Safari Roof Rack - (1) - LL1214
Stylish and practical roof tray in aluminium and injection moulded composites. Fitting kit LL1215. required.
Full-Length Roof Rack with Fold-Away Ladder -
Black nylon coated steel roof rack with unobtrusive, foldaway ladder.
Roof rack extension available for long wheelbase models.
Roof Rack - (1) - LL1216
Extension for LWB Models - (1) - LL1217
Ladder - roof access - (1) - STC50417
Luggage Top Box;
Fit to factory roof rack or aftermarket roof bars.
Original Equipment -
450 Litres (L=1600, W=956, H=410) - (1) - CAK000020
320 Litres (L=1300, W=950, H=340) - (1) - STC7963
Aftermarket Equipment -
350 Litres (L=1300, W=990, H=350) - (1) - CAK500010P
Luggage Tie-Down Loops - (ar) - LL1069
Sold individually. Complete with fixings.
Spare Wheel Cover;
Genuine - vinyl (with Land Rover logo) -
750 x 16 - (1) - MXC6405
205 x 16 - (1) - MXC6406
235 x 16 - (1) - STC7665AA
265 x 16 - (1) - STC8487AA
Aftermarket -
Vinyl - plain back
750 x 16 - (1) - MXC6405P
205 x 16 - (1) - RD1113-205
235 x 16 - (1) - RD1113-235
Stainless Steel
265/40 x 16 - (1) - LL1228
Bike Carrier;
Tow Bar Mounted -
Original Equipment - (1) - STC8163
Carries up to 2 bikes.
Aftermarket - (1) - STC8163P
Carries up to 2 bikes.
Spare Wheel Mounted -
Aftermarket - (1) - RD1110
Carries up to 3 bikes. Includes number plate holder and hold down straps.
Spare Wheel Carrier;
Swing-Away Type -
Original Equipment - (1) - ANR5015
Aftermarket
All up to 2002 except Soft Top - (1) - LL1226
Soft Top Models - (1) - LL1227
Bonnet Mounted -
For Steel Wheels - (1) - STC7633
For Alloy Wheels - (1) - STC7686
Trailer Board - (1) - RX1513
4'. Includes 4m cables.
Chequer Plate - Genuine;
Wing Top - front -
Matt Finish - with aerial aperture (pair)
RHD - (1) - STC7667
LHD - (1) - STC7693
Bright Finish
RH - (1) - STC60162
LH - (1) - STC60163
Sill Kit - matt finish -
Includes sill covers, bumper plates and rear corners.
90 - (1) - STC50245
110 - (1) - STC50381
Sill - bright finish (50th Anniversary 90) -
RH - (1) - STC60164
LH - (1) - STC60165
Rear Wheel Arch -
Leading Edge
90
RH - (1) - STC61834
LH - (1) - STC61835
110
RH - (1) - STC61836
LH - (1) - STC61837
Trailing Edge
90
RH - (1) - STC61829
LH - (1) - STC61828
110
RH - (1) - STC61833
LH - (1) - STC61832
Rear Step - (1) - STC60168
Running board type.
Front Bumper -
RH - (1) - STC61844
LH - (1) - STC61843
Loadspace Area (Tomb Raider 110) -
Wheelbox
RH - (1) - STC61839
LH - (1) - STC61838
Floor - (1) - STC61840
Chequer Plate - aftermarket;
Wing Top -
Supplied in pairs. 2mm aluminium plate, also available in black finish.
With Vent Hole - all models - (1) - LL1207
As above but in black - (1) - LL1208
Bonnet Top -
3mm aluminium plate, fits into the bonnet recess. Available in aluminium or black finish.
Aluminium Finish - (1) - LL1209
Black Finish - (1) - LL1210
Sill Plate -
Supplied in pairs. Available in aluminium and black.
90
Aluminium Finish - (1) - LL1260
Black Finish - (1) - LL1261
110
Aluminium Finish - (1) - LL1262
Black Finish - (1) - LL1263
Rear Wheel Arch Trailing Edge - 90 -
Aluminium Finish - (1) - LL1211
Black Finish - (1) - LL1264
Bumper Top - all models - (1) - LL1265
Aluminium finish only.
Loadspace Door Plate -
Fits to the inside of the rear door in place of the original trim, for extra protection. Aluminium finish only.
Models without Rear Wiper - (1) - LL1266
Models with Rear Wiper
Early Type - (1) - LL1267
Late Type - (1) - LL1268
Loadspace Area - 90 - (1) - LL1269
Chequer plate coverings for the wheelboxes and floor in aluminium finish only.
Rivet - chequer plate - (ar) - AFU1843
Mudflaps;
Front -
All Models
RH - (1) - CAS000180PMA
LH - (1) - CAS000190PMA
Pair of Mudflaps only - (1) - RTC4685
Mudflap Kit (includes fittings) - (1) - RTC9479
Rear -
90
Up to VIN FA414686
RH - (1) - MUC2344
LH - (1) - MUC3990
From VIN FA414687 except Td5 & B8 Efi
RH - (1) - CAT000200PMA
LH - (1) - CAT000190PMA
Td5 & V8 Efi
RH - (1) - CAT000200PMA
LH - (1) - CAT000210PMA
110/130 -
Pair - (1) - BTR277
Mudflap Fittings - Front;
All Models
Mounting Brackets
RH - (1) - MTC3000
LH - (1) - MTC3001
Stiffener - mudflap support - (2) - MTC3874
Screw
Bracket to Chassis - (6) - FS106167
Mudflap to Bracket - (6) - FS106255L
Nut - mudflap screw - (6) - GHF212
Mudflap Fittings - Rear;
90 -
Mounting Brackets
Up to VIN AA232010
RH - (1) - MUC3984
LH - (1) - MUC3985
VIN AA232011 on
RH - (1) - MUC3986
LH - (1) - MUC3987
Stiffener - mudflap support - (2) - MUC1512
Screw
Bracket to Chassis - (6) - FS106167
Mudflap to Bracket - (6) - FS106255L
Nut - mudflap screw - (6) - GHF212
110/130 -
Mounting Brackets
RH - (1) - MTC8358
LH - (1) - MTC8357
Screw
Bracket to Chassis
M6 x 16 - (6) - FS106167
M6 x 20 - (6) - FS106201L
Mudflap to Bracket - (6) - FS106167
Nut - mudflap screw - (6) - GHF212
Door Wind Deflectors (front pair) - (1) - LL1063
Drive with the windows down without the buffeting!
Made from tough acrylic (light smoke) material. Easily fitted.
Hood & Sticks Kit;
Complete soft top kit for 90s from VIN AA224094 onwards.
Kit comprises canvas soft top with side and rear windows, plus full frame set. In fact, everything you need to go topless!
Khaki Hood - (1) - LL1068KHAKI
Sand Hood - (1) - LL1068SAND
Tonneau Cover - (1) - BTR8691
90 SV soft top.
Radiator Muff - (1) - LL1229
Easily removable radiator cover for all models,
features 2-position flap to regulate air flow in winter.
Hiclone is a simple non moving stainless steel device that sits inside the air induction system of an engine. Like a static mixer, it vigorously swirls the air.
The swirling effect improves the fuel/air mixture promoting more complete combustion. Hiclone increases torque, improves fuel consumption and cuts hydrocarbon emissions: in particular smoke.
Fit Hiclone in front of a Land Rover Turbo Charger and feel the difference.
See how it improves low down grunt, acceleration and reduces turbo lag. Hiclone can also be fitted to non turbo diesel and petrol engines - feel the difference!
Hiclone also smooths out the engine torque curve, resulting in a reduction in gear changes and a quieter engine especially on the motorway.
With Hiclone fitted you can corner in a higher gear, this makes the vehicle easier to drive and improves the ride.
Hiclone;
2.25 Petrol - (1) - LL1075
3.5 V8 Carbs - (1) - RA1462
2.5 Non Turbo Diesel - (1) - LL1064
2.5 TD - (1) - LL1065
200Tdi - (1) - LL1066
200Tdi (EGR) - (1) - RD1167
300Tdi - (1) - LL1067
300Tdi (EGR) - (1) - RD1168
Td5 - (1) - LL1076
PLUG IN A POWER BOX!
Do you want increased power & torque with no loss of economy? Then you need an easy to install digital powerbox.
Installation is relatively easy, with no specialist tools or skills required.
No irreversible modifications are made - the Power Box can be removed just as easily and the vehicle reverts to its original state.
HOW DOES IT WORK?
Power Box is a high quality, digital management upgrade, incorporating a modern RISC microprocessor. The “chip” is carefully programmed - using the manufacturers standard fuel map as a foundation - and modifies the opening times of the injectors, which then accurately meters the extra fuel required. Unlike many analogue devices, which crudely over-fuel throughout the entire rev-range, each Power Box is specifically mapped for the intended application. Extra fuel is provided when needed - eliminating flat-spots and hesitation - but there is no unnecessary enrichment, meaning no loss of fuel economy and no black smoke. In fact, most Power Box users report a noticeable improvement in fuel economy, as they discover it’s no longer necessary to work their vehicle so hard.
Power Box;
Td5 1999 on - (1) - LL1340
TA on.
See Powerbox for full details.
Driving Lamp;
Rally 1000 - (ar) - STC7644
As fitted to Tomb Raider vehicles.
Safari 5000 - (2) - STC8480
Genuine 9" circular lamps with removable stone guard.
Supplied individually.
Wipac 'Off Road' - pair - (1) - RX1512
9" circular driving lamps supplied as a pair, off-road complete with chunky plastic grille. Inc H3 100w bulbs.
Steady Bar - Safari 5000 - (2) - STC8814
Wiring Kit - Safari 5000 - (1) - STC8813AA
Hella Comet FF series fog lamp kit;
Kit includes 2x lamps with bulbs, wiring & relay (plus switch) and lens covers. Remote mounting.
Comet FF 100 - (1) - RX1533100
Oval. 154mmW x 85mmD x 108mmH.
Comet FF 200 - (1) - RX1533200
Round.144mmW x 76mmD x 153mmH.
Comet FF 300 - (1) - RX1533300
Oval. 191mmW x 95mmD x 118mmH.
Driving Lamps;
Wipac - (1) - RX1512
Wipac (9" circular). Off-road with plastic 'Wipac 4x4' grille.
Supplied as a pair inc H3 100w bulbs.
Genuine - (2) - STC8480
Genuine (9" circular). Safari 5000 style with removable stoneguard.
Supplied each. Wiring, switch & relay kit sold separately (use RTC9586AA to 3/94 or STC8813AA 3/94 on).
RX1512
Search Lamp - (1) - RTC8921AA
Mirror mounted.
High Level Brake/Stop Light - (1) - RX1298
Rear Fog Light/Guard - (1) - RB7092
Portable Halogen Worklight (500w) - (1) - RX1263
Replacement Bulb for RX1263 - (1) - RX1263B
Ideal for working on you car or for jobs around the house.
Inc. 240v-500w tungsten halogen lamp, 2m cable and BS plug.
Inspection Lamp/Halogen - (1) - RX1424
Plugs into cigar lighter.
A power source inverter converts car battery voltage (12v) into a 240v output.
You can plug in a variety of mains voltage appliances into the standard UK socket.
Three different inverters are available to suit a range of power requirements.
There is overload, overheat and short circuit protection on all models.
Power Source Inverter;
150 Watt Model - (1) - RX1551-150
Continuous power: 150w. Peak power: 300w
Cigar lighter plug connection. 15A fuse.
Suitable applications: TV, DVD, Video, Computer Consoles, Lights (not fluorescent) Phone charger etc.
300 Watt Model - (1) - RX1551-300
Continuous power: 300w. Peak power: 660w
Cigar lighter or battery clip connection. 40A fuse.
Suitable applications: as 150w model plus small power tools, small fridges, stereo etc.
500 Watt Model - (1) - RX1551-500
Continuous power: 500w. Peak power: 800w
Battery clip connection only. 70A fuse.
Suitable applications: as 300w model plus medium power tools, colour TV’s with DVD’s, battery chargers etc.
Mobile Fridge/Travel Cooler - (1) - RX1540
Ideal for keeping food and drinks cool in the summer!
Simply plugs into cigar lighter.
The ultimate in comfort & convenience: Kenlowe Engine Hotstart is a mains-powered pre-heater and coolant pump. Fitted in a convenient position in the engine bay, Hotstart rapidly heats the engine to operating temperature and holds it there, eliminating the engine wear, extra fuel costs and de-icing associated with cold winter mornings.
The Kenlowe Interior Pre-Heater, working in conjunction with Hotstart, pre-heats the car's interior (as well as demisting iced-up windows) before you even turn on the ignition, making the start of your journey safer and more comfortable.
Kenlowe 'Hotstart' Engine & Interior Pre-Heater - (1) - RX1361
Kenlowe Fan Kit;
Contains everything you need to fit an electric fan to your vehicle,
including mounting brackets, wiring and temperature sensor.
2.25 & 2.5 Petrol - (1) - RA1096
2.5 NA Diesel - (1) - RA1096
2.5 TD - (1) - LL1083
200/300Tdi - (1) - RA1096
Td5 - (1) - LL1084
V8 - (1) - LL1083
How Does 'Dis-Car-Nect' Work?
When leaving your car, simply remove the knob to isolate the starter circuit. The 16amp by-pass fuse will maintain current to all other electrical circuits - stereo memories, alarm etc. Because the starter motor draws over 150amps, any attempt to connect (hot-wire) the starter motor will instantly cause the by-pass fuse to blow, this immobilises the car until the knob is replaced. If this should happen, simply replace the 16amp fuse at your convenience. As an added advantage, the 'Dis-Car-Nect' will also prevent battery drain if you intend to store your car, simply unscrew the knob and remove the fuse. For extra security you can unscrew and remove the immobiliser knob completely.
'Dis-Car-Nect' starter immobiliser - (ar) - RX1356
Replacement screw knob - (ar) - RX1356KNOB
Replacement fuse - (ar) - RX1356FUSE
The battery charger that turns on and off automatically.
Suitable for all 12 volt batteries (from 5AH to 100AH), this superb product constantly revitalises the battery cells - helping to extend cell life, without the danger of overcharging.
Supplied complete with all fittings and operating instructions, the benefits are :-
· Designed to be left connected for long periods.
· Use without disconnecting vehicle electrics.
· L.E.D. battery condition display.
· Thermal cut-out facility.
· 12 month guarantee.
Battery Conditioner Kit - (1) - RX1410
Battery Charger (6v/12v) - (ar) - GAC7106
Standard battery charger.
Aluminium Interior Trim - all models;
Heater Vent Trims (pair) - (1) - LL1218
Heater Control Knobs (set of 3) - (1) - LL1219
Clock Surrounds (set of 4) -
Up to 1998 - (1) - LL1220
1999 on with Clock - (1) - LL1221
1999 on with Rev Counter - (1) - LL1222
Sound Proofing Kit - (1) - LL1007
Suitable for all models, this pre-cut sound-deadening felt covers the cab and under-bonnet area.
Features peel-back adhesive on the appropriate areas.
Cubby Box (lockable);
All cubby boxes are universal fit.
Original Equipment -
Square Front - (1) - AWR1607
Pre-Defender style.
Sloping Front
Defender style.
Dark Granite - (1) - FJG000010LOY
Black - (1) - FJG000010PMA
Aftermarket -
Sloping Front
Defender style.
Black with padded armrest on the lid.
Black Vinyl - (1) - LL1223BLACK
Grey Vinyl - (1) - LL1223GREY
Caviar - (1) - LL1223CAVIAR
Brushwood - (1) - LL1223BRUSHWOOD
Neptune - (1) - LL1223NEPTUNE
Moorland - (1) - LL1223MOORLAND
Smokestone - (1) - LL1223SMOKESTONE
Techno - (1) - LL1223TECHNO
Cup Holder Insert - (1) - STC61865
For sloping front cubby boxes.
Footwell Mat (rubber) - OE;
Front - pair -
Up to VIN WA159806 (1998) - (1) - RTC8098AB
VIN XA159807 on (1999) - (1) - STC50172
Middle Footwell - pair -
Up to VIN WA159806 (1998) - (1) - RTC8099
VIN XA159807 (1999) on - (1) - STC50173
Floor Mat Set - aftermarket - (1) - LL1143
Pair of dark grey front footwell mats in waterproof carpet material, suitable for 90 & 110.
Loadspace Liner -rigid;
90 Station Wagon - (1) - RTC8936AA
110 Station Wagon - (1) - RTC8935
Loadspace Mat;
90 -
Except Station Wagon - (1) - STC7619
Station Wagon - (1) - STC7898
110 -
Except Station Wagon - (1) - STC7620
Station Wagon - (1) - STC7899
Front Seat Covers - set of 3 - (1) - LL1224
Suitable for all models (with original seats).
Tailored, waterproof seat covers, which can be easily fitted and removed.
Rear Window Mesh Guard Kit - (1) - LL1225
Suitable for all hard-top models.
Made from black nylon coated steel mesh, the set covers the rear door window and two rear quarter lights.
Dog Guard - mesh type;
90 & 110 Regular - (1) - RTC8095
110 Station Wagon - (1) - STC7555
For serious off-road driving in the worst conditions, locking axle differentials are essential. This is because traction can still be lost altogether when a single wheel starts to spin. In this instance, all of the available drive will be transmitted to the spinning wheel. Locking diff’s prevent this by allowing drive to be transmitted to the wheel/s which still have grip.
Locking diff’s can be fitted to the front, rear, or for maximum traction, both axles.
We offer three types of locking differential, each with its own benefits:
1. Detroit Diff Locker. This is a fully automatic locking diff’ that is simple to fit and extremely rugged and dependable. It transmits maximum drive to the gripping wheel when traction is lost. However, due to the way in which it operates, it is recommended for fitting to the rear axle only.
2. Detroit True Trac. This unit features a gear-type limited slip design. Although not quite as effective as the Detroit Diff Locker, the True Trac can be fitted to front or rear axles without any effect on the steering. Locking is fully automatic and fitting is simple.
3. ARB Air Locker. This unit is a manual locking device and therefore only selected when needed, at the push of a button. The benefits of this design are that maximum drive is transmitted when needed and, when unlocked, the diff’ performs as normal. However, fitting is more complicated, requiring an air compressor to operate the unit. ARB Lockers can be fitted to front or rear axles.
Detroit Locker (rear axle only);
Rover Axles -
10 Spline - (1) - LL1152
24 Spline - (1) - LL1153
Salisbury Axles - (1) - LL1154
Detroit True Trac (front or rear axles);
Not available for Salisbury axles.
Front -
10 Spline - (1) - LL1155
24 Spline - (1) - LL1156
Rear -
10 Spline - (1) - LL1157
24 Spline - (1) - LL1158
A.R.B. Locker (front or rear axles);
Please note, ARB Lockers require a separate compressor.
Rover Axles -
10 Spline - (1) - LL1159