1983 Onwards
|
|
|
|
Land Rover 90-110 Defender Suspension Packages
1983 Onwards |
|
Page Contents
Shock Absorber Kits (Standard)
Uprated Shock Absorber & Spring Kits
©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Shock Absorber Kits (Standard)
Spring Kits (Standard)
Shock Absorber & Spring Kits
Suspension Bush & Bolt Kits
Uprated Shock Absorber Kits
Uprated Shock Absorber & Spring Kits
Uprated Spring Kit
Uprated Steering Damper
Standard Shock Absorber Kits;
Kit includes 2 front and 2 rear standard shock absorbers.
90 -
Up to VIN WA159806 (1998) - (1) - LL1295
VIN XA159807 (1999) on - (1) - LL1296
110/130 -
Up to VIN WA159806
Normal Duty - (1) - LL1297
Heavy Duty - (1) - LL1298
Self Levelling - (1) - LL1299
VIN XA159807 (1999) on - (1) - LL1300
Standard Road Spring Kits;
Kit includes 2 front and 2 rear standard road springs.
90 -
UP to VIN WA159806 (1998) - (1) - LL1301
VIN XA159807 (1999) on - (1) - LL1302
110 -
Up to VIN WA159806 (1998)
Normal Duty - (1) - LL1303
Self Levelling - (1) - LL1305
VIN XA159807 (1999) on
Normal Duty - (1) - LL1304
Self Levelling - (1) - LL1304
130 -
Up to VIN WA159806 - (1) - LL1306
VIN XA159807 (1999) on - (1) - LL1307
Standard Shock Absorber & Spring Kits;
Kits include 2 front and 2 rear standard shock absorbers and 4 standard road springs.
90 -
Up to VIN WA159806 (1998) - (1) - LL1098
VIN XA159807 (1999) on - (1) - LL1099
110 -
Up to VIN WA159806 (1998)
Normal Duty - (1) - LL1100
Self Levelling - (1) - LL1102
VIN XA159807 (1999) on
Normal Duty - (1) - LL1101
Self Levelling - (1) - LL1103
130 -
Up to VIN WA159806 (1998) - (1) - LL1104
VIN XA159807 (1999) on - (1) - LL1105
Standard Bush Kit - (1) - RA1173
Direct replacement of original bushes. Kits contain complete vehicle sets of standard suspension bushes, including:
Front: radius arm-to-axle, radius arm-to-chassis, panhard rod. Rear: top link-to-chassis, bottom link-to-axle, bottom link-to-chassis.
Also included: top and bottom shock absorber bushes, front and rear, plus anti-roll bar bushes where appropriate.
Bolt Kit - (1) - RA1177
Contain all the nuts & bolts necessary when renewing the suspension bushes.
Polybush Kit;
Original ‘Polybush’ suspension bushes are available in two types, Classic (red) and Comfort (blue), both equally suitable for Land Rovers.
Classic are the original polyurethane bushes, giving a firmer ride and more positive handling;
Comfort bushes are designed to combine the smoothness and comfort of the factory-fitted rubber bushes with the long life and easy-fit of the Polybush Classic.
Classic - (1) - RA1274POLYBUSH
Comfort - (1) - RA1275POLYBUSH
Polyurethane Bush Kits (alternative);
These high quality bushes are made from 80 shore hardness polyurethane (black) and offer a performance somewhere between the ‘Polybush’ Classic (red) and Comfort (blue).
Polyurethane Bush Kit - (1) - RA1274ALTPOLY
Both polyurethane kits are supplied as vehicle sets (excluding shock absorber & A-frame bushes - see ‘Supplementary Polyurethane Bush Kits’),
they are simple to fit replacements which will outperform and outlast the original rubber bushes many times over.
Polyurethane bushes are also available singularly (black) - refer to individual listings on appropriate page(s).
Note: Although polyurethane suspension bushes can be DIY fitted by hand, requiring no special tools, a hydraulic press is needed to remove the old rubber bushes.
Supplimentary Bush Kits;
Includes bushes not supplied in the above kits (i.e. shock absorbers, ‘A’ frame & steering damper bushes.
90 - all models excluding Td5 & 50th Anniversary - (1) - LL1308
90 - Td5 & 50th Anniversary only - (1) - LL1309
110 & 130 - all models - (1) - LL1310
De Carbon Uprated Shock Absorbers;
Front (pair) - (1) - RA1345DECARBON
Rear (pair) - (1) - RA1346DECARBON
Car Set of 4 - (1) - RA1344DECARBON
Koni Uprated Shock Absorbers;
Up to VIN WA (1998)
Front (pair) - (1) - RA1345KONI
Rear (pair) - (1) - STC3767KONI
Car Set of 4 - (1) - LL1110
VIN XA (1999) on
Front (pair) - (1) - RSC100040KONI
Rear (pair) - (1) - RPM100070KONI
Car Set of 4 - (1) - LL1111
Bilstein Uprated Shock Absorbers;
Up to VIN WA (1998)
Front (pair) - (1) - RA1345BILSTEIN
Rear (pair) - (1) - RA1346BILSTEIN
Car Set of 4 - (1) - RA1344BILSTEIN
VIN XA (1999) on
Front (pair) - (1) - RSC100040BILSTEIN
Rear (pair) - (1) - RPM100070BILSTEIN
Car Set of 4 - (1) - LL1112
Gaz Uprated Shock Absorbers;
Front (pair) - (1) - RA1345GAZ
Rear (pair) - (1) - RA1346GAZ
Car Set of 4 - (1) - RA1344GAZ
The standard shock absorbers and springs fitted to Land Rovers are a cost-effective compromise between ride comfort, handling, load carrying and towing ability.
We recommend fitting uprated suspension components if any of the following applies to you:
1. You wish to impove handling.
2. You regularly tow large trailers or carry heavy loads for extended periods.
3. You have improved the performance of your Land Rover.
4. You find the vehicle floats and wallows excessively.
5. You regularly use the vehicle off-road.
We stock uprated shock absorbers by Bilstein, De Carbon, Koni and Gaz.
Bilstein and De Carbon are heavy duty, non-adjustable gas shock absorbers offering vastly superior damping abilities and extended life compared to original equipment.
Koni shock absorbers offer similar benefits, plus they are adjustable for damping rate whilst fitted to the vehicle.
Gaz shock absorbers are also adjustable on car with 36 finetune settings, zinc-plated bodies, individually tested and supplied with a 3-year warranty (British made).
We recommend changing the vehicle’s springs at the same time. You can fit uprated shock sbsorbers with standard springs or you can fit uprated springs of raised ride height (front 45mm rear 40mm higher), which are recommended for heavy towing and extra ground clearance when off-roading.
Our kits show just about every combination to suit your requirements - and they save you money too!
De Carbon Uprated Shock Absorbers & Uprated Springs;
90 -
Car Set of 4 - (1) - LL1113DECARBON
With raised ride height springs.
Front: 255lb, raised 45mm. Rear: 295lb, raised 40mm.
110/130 -
Car Set of 4 - (1) - LL1114DECARBON
With raised ride height springs.
NB. Not suitable for vehicles with self-levelling suspension.
Front: 255lb, raised 45mm. Rear: 510lb, raised 40mm.
Koni Uprated Shock Absorbers & Uprated Springs;
90 -
Up to VIN WA (1998)
Car Set of 4 - (1) - LL1113KONIEARLY
With raised ride height springs.
Front: 255lb, raised 45mm. Rear: 295lb, raised 40mm.
VIN XA (1999) on
Car Set of 4 - (1) - LL1113KONILATE
With raised ride height springs.
Front: 255lb, raised 45mm. Rear: 295lb, raised 40mm.
110/130 -
Up to VIN WA (1998)
Car Set of 4 - (1) - LL1114KONIEARLY
NB. Not suitable for vehicles with self-levelling suspension.
With raised ride height springs.
Front: 255lb, raised 45mm. Rear: 510lb, raised 40mm.
Car Set of 4 - (1) - LL1114KONILATE
NB. Not suitable for vehicles with self-levelling suspension.
With raised ride height springs.
Front: 255lb, raised 45mm. Rear: 510lb, raised 40mm.
Bilstein Uprated Shock Absorbers & Uprated Springs;
90 -
Up to VIN WA (1998)
Car Set of 4 - (1) - LL1113BILSTEINEARLY
With raised ride height springs.
Front: 255lb, raised 45mm. Rear: 295lb, raised 40mm.
VIN XA (1999) on
Car Set of 4 - (1) - LL1113BILSTEINLATE
With raised ride height springs.
Front: 255lb, raised 45mm. Rear: 295lb, raised 40mm.
110/130 -
Up to VIN WA (1998)
Car Set of 4 - (1) - LL1114BILSTEINEARLY
NB. Not suitable for vehicles with self-levelling suspension.
With raised ride height springs.
Front: 255lb, raised 45mm. Rear: 510lb, raised 40mm.
Car Set of 4 - (1) - LL1114BILSTEINEARLY
NB. Not suitable for vehicles with self-levelling suspension.
With raised ride height springs.
Front: 255lb, raised 45mm. Rear: 510lb, raised 40mm.
GAZ Uprated Shock Absorbers & Uprated Springs;
90 -
Car Set of 4 - (1) - LL1113GAZ
With raised ride height springs.
Front: 255lb, raised 45mm. Rear: 295lb, raised 40mm.
110/130 -
Car Set of 4 - (1) - LL1114GAZ
With raised ride height springs.
NB. Not suitable for vehicles with self-levelling suspension.
Front: 255lb, raised 45mm. Rear: 510lb, raised 40mm.
Uprated Springs;
90 -
Front: rate 255lb, raised 45mm.
Rear: rate 295lb, raised 40mm.
Front (pair) - (1) - LL1106
Rear (pair) - (1) - RA1351RAISED
Car Set of 4 - (1) - LL1108
110/130 -
Not self-levelling suspension.
Front: rate 255lb, raised 45mm.
Rear: rate 295lb, raised 40mm.
Front (pair) - (1) - LL1106
Rear (pair) - (1) - LL1107
Car Set of 4 - (1) - LL1109
Uprated Steering Damper - (1) - RTC4472UR
Used on its own or in conjunction with uprated suspension and bush kits,
uprated steering dampers improve the ‘feel’ and accuracy of the steering.
Return to Defender Index Page 
Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.