Parts Spares & Accessories for Triumph Range Rover Land Rover Rover by Mail Order - Rimmer Bros  Range Rover P38A Series 2 Parts Spares & Accessories
Range Rover P38A Series 2 Exhaust Systems
1994 - 2002

Page Contents
-

Sports System - Large Bore Twin & Quad Exit - Stainless Steel
Sports Catalyst - V8 Models - Stainless Steel
Full System - Inc Catalyst - Standard
Part System - exc Catalyst - Standard
Individual System Components - V8 - Standard
Individual System Components - Diesel - Standard
Gaskets & Fittings
Turbocharger

-

Sports System - Large Bore Twin & Quad Exit - Stainless Steel



See also 'Sports Catalyst' for V8 models.
Manufactured from high grade stainless steel with polished 100mm tailpipes - round (twin exit) or square (quad system).
Systems are available for both V8 and diesel models.
The systems are supplied from the catalyst back (ie. centre silencer & tailpipes).
Power is increased slightly due to the Free-Flow silencer design, which also contributes to a more appealing exhaust note at lower revs (particularly V8) whilst remaining no noisier than standard at cruising speeds.
Please Note: Pre 1996 (RH exit) vehicles require a simple cut-out in the rear apron and a bracket adaptation for the LH tailpipe.

Sports System (exc cats);
Includes fittings.
Comprises centre silencer & large bore tailpipe.
Excludes catalysts. Auto or manual.
V8 - 4.0/4.6 Litre
Twin Exit - (1) - RA1088LB
Quad Exit - (1) - RA1088QUAD
Diesel - 2.5TD
Twin Exit - (1) - RA1088DLB
Quad Exit - (1) - RA1088DQUAD

Sports Catalyst - V8 Models - Stainless Steel


For customers looking to further improve the performance of their V8 Range Rover, we can offer a very high quality, free flow sports catalyst assembly, which will enhance power at all revs.
Full details on request.


Sports Catalyst - V8 4.0/4.6 Litre;
Up to 1998 (VIN WA) - (1) - WCD000860SPORT
12mm diameter Lambda sensors.
1999 (VIN XA) on - (1) - WCD105350SPORT
18mm diameter Lambda sensors.

Full System - Inc Catalyst - Standard



Full System (inc cats) - V8 - 4.0/4.6 Litre;
Not including fittings of manifolds.
Comprises catalysts, centre silencer & tailpipes.
Auto or manual.
1994 to 1996 (VIN VA346793) RH Exit Tailpipe
Mild Steel - (1) - RA1074MS
Stainless Steel - (1) - RA1074SS
Fitting Kit - (1) - RA1074FK
1996 to 1998 (WA410481) Twin Exit Tailpipes
Mild Steel - (1) - RA1418MS
Stainless Steel - (1) - RA1418SS
Fitting Kit - (1) - RA1418FK
1998 (XA410482) on
Mild Steel - (1) - RA1453MS
Stainless Steel - (1) - RA1453SS
Fitting Kit - (1) - RA1453FK

Full System (inc cat) - Diesel 2.5TD;
Not including fittings or cast iron downpipe.
Comprises catalyst, centre silencer & tailpipe(s).
Auto or manual.
1994 to 1996 (VIN VA346793) RH Exit Tailpipe
Mild Steel - (1) - RA1078MS
Stainless Steel - (1) - RA1078SS
Fitting Kit - (1) - RA1078FK
1996 (VIN VA346794) on, Twin Exit Tailpipes
Mild Steel - (1) - RA1420MS
Stainless Steel - (1) - RA1420SS
Fitting Kit - (1) - RA1420FK

Part System - exc Catalyst - Standard


Catalysts are normally quite durable, so it is unlikely that they will need replacing unless an MOT emissions failure or a rattle indicate the need to replace the catalyst and perhaps full system.

Part System - (exc cats) - V8 - 4.0/4.6 Litre;
Not including fittings.
Comprises centre silencer & tailpipe(s). Excludes catalysts.
Auto or manual.
1994 to 1996 (VIN VA346793) RH Exit Tailpipe
Mild Steel - (1) - RA1075MS
Stainless Steel - (1) - RA1075SS
Fitting Kit - (1) - RA1075FK
1996 (VIN VA346794) on, Twin Exit Tailpipes
Mild Steel - (1) - RA1419MS
Stainless Steel - (1) - RA1419SS
Fitting Kit - (1) - RA1419FK

Part System (exc cat) - Diesel - 2.5TD;
Not including fittings.
Comprises centre silencer & tailpipe(s). Excludes catalyst.
Auto or manual.
1994 to 1996 (VIN VA346793) RH Exit Tailpipe
Mild Steel - (1) - RA1079MS
Stainless Steel - (1) - RA1079SS
Fitting Kit - (1) - RA1079FK
1996 (VIN VA346794) on, Twin Exit Tailpipes
Mild Steel - (1) - RA1421MS
Stainless Steel - (1) - RA1421SS
Fitting Kit - (1) - RA1421FK

Individual System Components - V8 - Standard


This section lists individual exhaust components in both mild steel and stainless steel.
Use it to select the appropriate parts if you are not replacing the whole system.

System Components - V8 - 4.0/4.6 Litre;
Auto or manual.
1994 to 1996 (VIN VA346793) RH Exit Tailpipe
Manifold (tubular, stainless steel)
RH - (1) - LKC102470
LH - (1) - LKC102480
Downpipe/Catalyst
Original - (1) - ESR4095
Aftermarket - (1) - ESR4095P
Sports - (1) - WCD000860SPORT
Centre Silencer
Mild Steel - (1) - WCE104311
Stainless Steel - (1) - WCE104311SS
Rear Silencer/Tailpipe (rh exit)
Mild Steel - (1) - ESR3538
Stainless Steel - (1) - ESR3538SS
Tailpipe Finisher - (1) - ESR3153
For mild steel tailpipe only.

1996 on - Twin Exit Tailpipes
Manifold (tubular, stainless steel)
RH - (1) - LKC102470
LH - (1) - LKC102480
Downpipe/Catalyst
Up to 1998 (VIN WA410481)
12mm diameter Lambdas.
Original - (1) - ESR4095
Aftermarket - (1) - ESR4095P
Sports - (1) - WCD000860SPORT
1999 (VIN XA410482) on
18mm diameter Lambdas.
Original - (1) - WCD105350
Aftermarket - (1) - WCD105350P
Sports - (1) - WCD105350SPORT
Centre Silencer
Mild Steel - (1) - WCE104311
Stainless Steel - (1) - WCE104311SS
Rear Silencer/Tailpipe (twin exit)
RH
Mild Steel - (1) - WDV100270
Stainless Steel - (1) - WDV100270SS
LH
Mild Steel - (1) - WDV100260
Stainless Steel - (1) - WDV100260SS

Individual System Components - Diesel - Standard


This section lists individual exhaust components in both mild steel and stainless steel.
Use it to select the appropriate parts if you are not replacing the whole system.

System Components - Diesel - 2.5TD;
Auto or manual.
1994 to 1996 (VIN VA346793) RH Exit Tailpipe
Downpipe/Catalyst
Original - (1) - ESR2521
Aftermarket - (1) - ESR2521P
Centre Silencer
Mild Steel
Original - (1) - ESR3194
Aftermarket - (1) - ESR3196P
Stainless Steel - (1) - ESR3194SS
Rear Silencer/Tailpipe (rh exit)
Mild Steel - (1) - ESR3196
Stainless Steel - (1) - ESR3538SS

1996 (VIN VA346794) on - Twin Exit Tailpipes
Downpipe/Catalyst
Original - (1) - ESR2521
Aftermarket - (1) - ESR2521P
Centre Silencer
Mild Steel - (1) - ESR3194
Stainless Steel - (1) - ESR3194SS
Rear Silencers/Tailpipes (twin exit)
RH
Mild Steel - (1) - WDV100270
Stainless Steel - (1) - WDV100270SS
LH
Mild Steel - (1) - WDV100260
Stainless Steel - (1) - WDV100260SS

Gaskets & Fittings



Gasket - manifold to head;
V8 - (4) - ERR6733
Twin port gasket. LH or RH.
Diesel - (4) - STC3697

Fasteners - exhaust manifold to cylinder head;
V8
58mm Bolt - (2) - ERR5094
69mm Bolt - (1) - ERR5462
100mm Bolt - (1) - ERR5096
m6 x 12mm Flanged Screw - (12) - FS106127L
Diesel
M8 Nut - (12) - 8510235
Washer - (12) - STC2265

Gasket - manifold to downpipe - V8 - (2) - ETC7513
Gasket - manifold to turbo- diesel - (1) - LKG100610
Olive - turbo to downpipe - diesel - (1) - ESR1069
Stud - manifold to downpipe - (6) - TE110051L
Stud - turbo to downpipe - (2) - STC2211

Nut - downpipe to manifold/turbo;
V8 (to manifold) - (6) - FX110047
Diesel (to turbo) - (2) - ESR1695

Spring (flexi-joint) - diesel - (2) - ESR1692
Downpipe to turbo.

Lambda Sensor - V8;
Up to VIN VA350483 (1997) - (2) - ERR1834
12mm diameter.
VIN VA350484 to WA (1998) - (2) - AMR6244
12mm diameter.
VIN XA (1999) on - (2) - MHK100940
18mm diameter.

Blanking Plug - lambda sensor hole;
See Lambda Sensors for change points.
12mm Diameter - (2) - WYB10005
18mm Diameter - (2) - MYB100040

Nut - exhaust joint - all models - (ar) - GHF252
M8.
Rubber Hanger - all models - (ar) - ESR3172
Exhaust Jointing Compound - (1) - GCH112

Turbocharger



Turbocharger - diesel;
New - (1) - STC2217
Exchange - (1) - STC2213E

Stud - turbo to exhaust - (2) - STC2211
Olive - turbo to exhaust - (1) - ESR1069
Gasket - turbo to manifold - (1) - LKG100610



- Return to Range Rover P38 Index Page -

The Parts You Need
- Home - About Rimmer Bros. - Prices - General Info - Delivery - How to Order - Your Order Form
- News- Restoration Projects - Picture Library - Triumph Links - Free Catalogue - Contact Us

©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.

Sun, 18 May 2008