|
|
|
Rover SD1 Front Suspension |
|
Page Contents
Mountings - Anti-Roll Bar to Track Control Arm
To VIN299417 (Approx 1985) VIN299418 Onwards (Approx 1985) Polyurethane Alternative (All Models) All Models Front Stub Axle, Insert & Spring
©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Front Subframe
Track Control Arm
Anti-Roll Bar
Mountings - Anti-Roll Bar to Track Control Arm
Steering Link
Front Stub Axle, Insert & Spring
Hub & Wheel Bearings
Front subframe - (1) - CRC1828
Brand new original. All models.
Subframe bolt (front) - (2) - BH110321
All except diesel.
Subframe bolt (front) - (2) - CRC3536
Diesel.
Subframe bolt (rear) - (2) - BH110201
All except diesel.
Subframe bolt - (2) - BH110221L
Diesel.
Nut - (4) - GHF223
Subframe bolt. All models.
Spacing grommet - (1) - CRC4057
Diesel.
Engine mounting support bar;
Not diesel.
Right hand - (1) - CRC700
Left hand - (1) - CRC701
Track control arm (complete);
Right hand - (1) - CRC1422
Left hand - (1) - CRC1423
Bush (track control arm to subframe);
Standard rubber - (2) - CRC1709
Hard rubber - (2) - CRC1709HARD
Polyurethane - (2) - CRC1709POLY
Nut (balljoint to steering link) - (2) - NY112041
Washer - (2) - WA112081
Bolt (arm to subframe) - (2) - BH112161
Washer - (4) - WA112081
Nyloc nut - (2) - NY112041
Anti-roll bar - (1) - NAM6926
All models.
Mounting bush (anti-roll bar to subframe);
Standard rubber - (2) - UKC210
Hard rubber - (2) - UKC210HARD
Polyurethane - (2) - UKC210POLY
Bracket (anti-roll bar mounting bush) - (2) - CRC1319
Bolt (bracket to subframe) - (4) - BH110171
Nut - (4) - GHF233
Clamp (anti-roll bar) - (2) - CRC1769
Bolt (clamp) - (2) - BH110121
Nut - (2) - GHF233
Vehicles from 1976 to VIN 299417 (approx '85) used 2 inner sponge bushes, 2 outer plastic flanged bushes and 2 large steel washers to locate the anti-roll bar to the track control arm each side. From VIN 299418 onwards, a slightly different design was used, comprising 1 outer spacer, 1 outer bush and different inner bush, an inner steel washer and a plastic sleeve running through the centre. Designed to improve track control arm location, the later parts can be fitted to earlier cars. Alternatively one-piece polyurethane bushes are now available, replacing the inner and outer bushes and providing superior location whilst out-lasting conventional rubber bushes.
Large inner steel washer - (2) - 134603
Flanged bush - (4) - CRC1408
Sponge bush - (4) - CRC1409
Large outer steel washer - (2) - CRC3053
Bush kit (track control arm) - (1) - NAM4745
To convert earlier cars to later specification.
Inner steel washer - (2) - NAM4744
Inner bush - (2) - NAM4742
Outer bush - (2) - NAM4741
Outer spacer - (2) - NAM4740
Large outer steel washer - (2) - CRC3053
Sleeve- anti roll bar - (2) - NAM4743
Polyurethane bush - (4) - CRC1408POLY
Polyurethane bush kit;
Includes track arm bushes, anti-roll bar bushes, watts linkage bushes & trailing arm bushes.
All models except Vitesse - (1) - RO1091
Vitesse - (1) - RO1104
Nut (M12) - (2) - NH112041
Locking cap - (2) - CRC3056
Split pin - (2) - PS106251L
Steering link;
Right hand - (1) - CRC435
Left hand - (1) - CRC436
Bolt (steering link) - (4) - CRC258
Tab washer - (2) - CRC438
Stub axle/tube only;
All models.
Right hand - (1) - NAM5154
Left hand - (1) - NAM5155
Bump stop;
Standard (pair) - (2) - CRC1276
Heavy duty - (2) - CRC5309
Gaiter - (2) - CRC456
Spring seat rubber - (2) - CRC2744
Washer - gaiter retaining - (2) - CRC270
Shim (front road spring) - (ar) - CRC507
Upper spring seat - (2) - CRC460
Top strut mounting - (2) - CRC2240
Top strut mounting - bearing only - (2) - CRC2240B
Grommet (strut mounting) - (2) - CRC295P
Strut insert;
NOTE: We recommend fitting strut inserts as pairs.
All models.
Standard - (2) - GSA74273
Gaz (pair) - (1) - GSA74273GAZ
On car adjustable.
Spax (pair) - (1) - GSA74273SPAX
On car adjustable.
Koni (pair) - (1) - GSA74273KONI
Off car adjustable.
Front spring (Standard);
Vitesse/VDP EFi - (2) - GRS143
3500/2600/2300 - (2) - GRS137
2000 - (2) - GRS137
2400TD - (2) - GRS142
Air con models - (2) - CRC1789
Front spring (Uprated);
Uprated/lowered 30mm - (2) - GRS143UR
Approx Vitesse ride height.
Uprated/lowered 60mm - (2) - GRS143UR-LOW
30mm lower than Vitesse.
Coil spring compressor - (1) - RX1328
Front hub assembly - (2) - CRC589
Front wheel stud (M12) - (10) - CRC1648
Front wheel bearing & seal kit - (2) - GHK1005
Kit is per wheel & includes 1 inner bearing, 1 outer bearing & 1 inner hub seal.
Multi purpose grease (400g tube) - (ar) - GGL111
Hub seal (inner) - (2) - GHS101
Bearing (inner) - (2) - UKC169
Bearing (outer) - (2) - GHB102
Special washer - (2) - 530586
Hub nut - (2) - CRC69
Cap (hub) - (2) - CRC289
Return to SD1 Index Page 
Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.