Rimmer Bros - Range Rover, Land Rover, Triumph & Rover SD1 Supplies Back to Rover sd1 V8
SD1 V8 Sump/Dipstick

Page Contents
-

Sump Pan & Oil Pick-Up Pipe
Dipstick

-

Sump Pan & Oil Pick-Up Pipe




Standard sumps are available in Saloon/Sports and 4x4 type.
Performance sumps are available for Saloon/Sports applications. Based on the Rover SD1 type sump, these are specially designed, enlarged sumps, with extra baffles to prevent oil starvation during high speed cornering.
We also supply (to special order) a modified sump designed specifically for Westfield type sports cars. This sump incorporates special baffles to prevent oil starvation during track-day use, and is available in standard and extra ground clearance versions.

Sump Pan - standard;
Saloon/Sports
SD1/TR8 type sump.
Without Oil Level Sensor - (1) - ERC2776
With Oil Level Sensor - (1) - ERC8544
4x4
Land Rover/Range Rover sump.
Except Series 2 Range Rover - (1) - ERR4633
Series 2 Range Rover - (1) - ERR5220

Sump Pan - Performance;
Performance sumps are exchange.
Saloon/Sports Applications - (1) - ERC2776PERF
Westfield Type Applications
Standard Clearance - (1) - RQ1001
Extra Ground Clearance - (1) - RQ1001LOW

Oil Level Sensor - (1) - DRC8005

Sump Gasket Set (inc seals);
All Engines up to 1991 - (1) - GUG1538CS
All Engines 1992 onwards - (1) - STC1639

Sump Gasket Only - (1) - AJM539
All engines.

Sump Bolt/Washer;
Saloon/Sports
Medium - (14) - SH505051
Long - (2) - 603944
4x4 - (16) - SH505051

Reinforcing Strip - rear of sump - (1) - 603943
Saloon/Sports only.

Drain Plug - sump;
All (except Series 2 Range Rover) - (1) - 603659
Series 2 Range Rover - (1) - UAM2957

Washer - sump drain plug;
All (except Series 2 Range Rover) - (1) - 213961
Series 2 Range Rover - (1) - UAM2857

Oil Pick-Up Strainer;
Saloon/Sports - (1) - ERC1585
4x4
All (except Series 2 Range Rover) - (1) - ERR3677
Series 2 Range Rover - (1) - ERR4795

Oil Screen - pick-up pipe - (1) - 602070A
All engines.
Gasket - pick-up strainer - (1) - 90602068
All engines except Series 2 Range Rover.
'O' Ring - pick-up strainer - (1) - ERR4795
Series 2 Range Rover engines.
Spacer - pick-up strainer - (1) - ERR4793
Series 2 Range Rover engines.

Setscrew - strainer to block;
All (except Series 2 Range Rover) - (2) - 253407
Series 2 Range Rover engines - (2) - FS106167

Spring Washer - setscrew - (2) - GHF331
All engines except Series 2 Range Rover.
Nut - strainer - (2) - NH605041
Series 2 Range Rover engines.
Baffle Plate - removable - (1) - ERC1506
Saloon/Sports sump only.
Screw - baffle plate - (6) - 253206
Spring Washer - baffle plate - (6) - GHF331
Flat Washer - baffle plate - (6) - RTC609
Steady Bracket - pick-up pipe - (1) - ERC1587
Saloon/Sports only.
Large Washer - steady bracket - (1) - ERC1629
Saloon/Sports only.
Stud - steady bracket - (1) - 252517
Small Washer - steady bracket stud - (1) - ERC1813
Spacer - steady bracket stud - (1) - ERC1628
Spring Washer - steady bracket - (1) - GHF332
Nut - steady bracket - (1) - GHF201
Setscrew - (2) - 255425
Pick-up pipe to steady bracket.
Flat Washer - (2) - RTC613A
Pick-up pipe to steady bracket.
Spring Washer - (2) - GHF332
Pick-up pipe to steady bracket.
Nut - (2) - GHF201
Pick-up pipe to steady bracket.

Dipstick




The length of the dipstick tube varies considerably depending on application.
SD1 saloons have a long dipstick tube and Range Rovers a much shorter one.
To get an accurate oil level reading, therefore, the dipstick & tube must match the engine.

Dipstick;
SD1 Saloon - (1) - ERR1922
TR8 (original) - (1) - 614293
Range Rover
All Models 1970 - 1985 - (1) - 603173
1986 (up to Series 2 Range Rover) - (1) - ERR1922
Series 2 Range Rover - (1) - ERR4905

Dipstick Tube;
SD1 Saloon - (1) - ERC6437A
TR8 (original) - (1) - ERC2690
Range Rover
All Models 1970 - 1985 - (1) - ERC2571
1986 (up to Series 2 Range Rover) - (1) - ERR4556
Series 2 Range Rover - (1) - ERR4550

'O' Ring - dipstick tube;
Saloon/sports - (1) - 532319
Range Rover - (1) - 602545
Except Series 2 Range Rover.

Retaining Clip - dipstick tube - (1) - 610489
Screws to rocker cover. Suitable for all engines.
Clamp - dipstick tube - (1) - 602449
Screw to adjacent cylinder head bolt. Suitable for all engine where fitted.



- Return to SD1 V8 Engine Index -      - Return to SD1 Index Page -

The Parts You Need
- Home - About Rimmer Bros. - Prices - General Info - Delivery - How to Order - Your Order Form
- News - Restoration Projects - Picture Library - Triumph Links - Free Catalogue - Contact Us

©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.

Fri, 21 Nov 2008