|
|
|
Triumph TR6 Cooling & Heating |
|
Page Contents
All CP models All CR models Water Pump Housing & Thermostat
To engine no. CP53031 From engine no. CP53032 With detachable pulley Alternative to 72, 73, 74. Hose Kits Fuel Injection Models. Carburettor Models. Carburettor Models. Individual Hoses Carb Models P.I. models. Hose Kits Fuel Injection Models Carburettor Models Carburettor Models European Models North American Models ©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Kenlowe Fan Kit
Fan
Water Pump Housing & Thermostat
Water Pump
Fan Belt
Radiator
Radiator Hoses
Overflow Bottle
Air Duct & Stay Rods
Consumables
Heater
Heater Hoses
Water Valve
Heater Controls
Demister & Air Hoses
1. 
Kenlowe Electric Fan Kit - (1) - RB7065
2. Thermo Switching Sensor - (1) - KLM1416
Included with kit.
3. Manual Over-Ride Switch - (1) - KLM1636
Included with kit (facia mounted).
Kenlowe Fan Kit RB7065
4. Fan (8 blade, plastic, yellow) - (1) - 308353
To engine no. CP50000.
5. Fan (7 blade, plastic, yellow) - (1) - 311868
From engine no. CP50001.
6. Fitting Kit (fan blade) - (1) - 308353FK
7. Bolt (extension and pulley to crankshaft) - (1) - 148832
8. Extension (fan) - (1) - 148831
9. Dowel Pin (locating extension on pulley) - (1) - DP508
10. Bush (fan to extension) - (8) - 108496
11. Sleeve (fan to extension) - (4) - 108499
12. Washer (plain) - (4) - 108495
13. Washer (tab, locking fan attachment bolt) - (2) - 107857
14. Bolt (fan to extension) - (4) - BH605101
15. Fan (13 blade, plastic, red) - (1) - 312301
16. Fitting Kit (fan blade) - (1) - 308353FK
17. Bolt (extension and pulley to crankshaft) - (1) - 148832
18. Extension (fan) - (1) - 148831
19. Dowel Pin (locating extension on pulley) - (1) - DP508
20. Adaptor (fan extension) - (1) - 157876
21. Bolt (adaptor to extension) - (4) - BH605131
22. Washer (plain) - (4) - GHF301
23. Bolt (fan to adaptor) - (4) - BH605101
24. Washer (plain) - (4) - GHF301
25. Pulley & Damper Assembly - (1) - 214479
3/8" wide belt groove.
Pulley & Damper Assembly - (1) - 217371
1/2" wide belt groove.
26. Housing (water pump) - (1) - 307095
27. Stud (water pump to housing) - (3) - 101962
28. Washer (locking) - (3) - GHF332
29. Nut - (3) - GHF201
30. Gasket (housing) - (1) - 138792
31. Bolt (housing to cylinder head) - (1) - BH605251
3 1/8" long.
32. Bolt (housing to cylinder head) - (2) - BH605181
2 1/4" long.
33. Washer (locking) - (3) - GHF332
34. Adaptor (heater return pipe to housing)* - (1) - 101343
35. Pipe (heater return)* - (1) - 214404
Pipe (heater return)* - (1) - 214404SS
Stainless Steel.
* European models.
36. Pipe (heater return)** - (1) - 214405
Pipe (heater return)** - (1) - 214405SS
Stainless Steel.
** North American Models.
37. Nut (tube) - (1) - 101302
38. Olive (sealing) - (1) - TL11
39. Plug (blanking) - (1) - 114774
Use if heater is not fitted.
40. Plug (blanking) - (1) - 122132
41. Washer (fibre, sealing plug) - (1) - WF513
42. Temperature Sender Unit - (1) - GTR108
43. Thermostat (82°C) - (1) - GTS104
Standard.
Thermostat (74°C) - (1) - GTS102
Hot climates/summer.
Thermostat (88°C) - (1) - GTS106
Cool climates/winter.
44. Elbow (thermostat cover) - (1) - 134681
45. Gasket (thermostat cover) - (1) - GTG103
46. Screw (elbow to housing) - (1) - GHF103
47. Bolt (elbow to housing) - (1) - BH605141
48. Washer (locking) - (2) - GHF332
44. Elbow (thermostat cover) - (1) - 156333
45. Gasket (thermostat cover) - (1) - GTG103
46. Screw (elbow to housing) - (1) - GHF103
47. Screw (elbow to housing) - (1) - BH605101
48. Washer (locking) - (2) - GHF332
The earliest TR6's were fitted with a water pump that had a detachable pulley. This type is easily identified by the self locking nut that retains the pulley on the pump spindle, this design of water pump is repairable. It was replaced on later cars by a water pump and pulley assembly; this time the pulley was pressed on to the shaft. This unfortunately means that the pulley cannot easily be removed and therefore the pump is not easily repaired. The pump and pulley assembly, GWP201, will substitute for any previous TR6 water pump application.
49. Water Pump & Pulley Assembly - (1) - 517257
50. Spindle - (1) - 104839
51. Impeller - (1) - 104840
52. Seal (impeller to bearing housing) - (1) - 148322
53. Seal (on spindle) - (1) - 60313
54. Circlip (bearing locating on shaft) - (1) - 500047
55. Washer (abutment circlip to bearing) - (1) - 101092
56. Bearing - (2) - 100764
57. Spacer (between bearings) - (1) - 104841
58. Circlip (bearing locating in housing) - (1) - 100851
59. Key (woodruff, spindle to pulley) - (1) - KW420
60. washer (plain) - (1) - WP181
61. Nut (nyloc, pulley to spindle) - (1) - GHF272
62. Pulley (pump driving) - (1) - 133239
63. Plug (lubrication hole) - (1) - 122115
64. Lubricator (grease nipple) - (ar) - 125361
Fit only when servicing.
65. Water Pump & Pulley Assembly - (1) - GWP201
With fixed 3/8" pulley. P.I. models.
Water Pump & Pulley Assembly - (1) - GWP203
With fixed 1/2" single pulley. USA models, see 'Fan Belt' note.
66. Water Pump & Pulley Assembly - (1) - TKC2106
With fixed 1/2" dual pulley. USA models, see 'Fam Belt' note.
67. Gasket (pump to housing) - (1) - 138701
Note: Certain North American market carburettor-engined TR6s had a fan belt that was 1/2" wide in place of the 3/8" wide belt fitted to all TR6 P.I. models. The associated pulleys that the 1/2" fan belt ran with were also wider (which in turn means that the fixed pulley water pumps were also different). To this end, an owner must check the width of the belt and pulley system on his or her car prior to ordering replacement parts, if there is any doubt regarding the originality of the specification of the engine.
68. Fan Belt (3/8") - (1) - 214239
To engine no. CR5000.
Fan Belt (3/8") - (1) - GFB142
From engine no. CR5001.
Fan Belt (1/2" single pulley) - (ar) - 217391
Fan Belt (1/2" dual pulley) - (ar) - TKC2165
Fan Belt (air pump) - (ar) - TKC2166
Two radiator designs were used during the production life of the TR6 P.I. The design changed when the bottom inlet tube to the radiator was repositioned. This in turn caused the reshaping of the steel tube between the two lower radiator hoses.
69. Radiator (new)* - (1) - 308850
Radiator (reconditioned, exchange)* - (1) - 308850R
* To commission no. CP75000.
Radiator (new)** - (1) - 312347
Radiator (reconditioned, exchange)** - (1) - 312347R
** From commission no. CP75001.
70. Cap (radiator, 7 psi) - (1) - GRC112
To commission no. CP75000.
Cap (radiator, 13 psi) - (1) - GRC114
From commission no. CP75001.
71. Drain Tap - (1) - 132565
To commission no. CP75000.
72. Screw (radiator to chassis frame) - (2) - SH606091
73. Washer (plain) - (2) - GHF302
74. Packing (radiator mounting) - (ar) - 601994
75. Stud (radiator mounting to chassis) - (2) - 143712
76. Washer (plain) - (2) - GHF302
77. Nut (plain, radiator mounting) - (2) - GHF202
78. Packing (radiator mounting) - (ar) - 601994
79. Stay (radiator to chassis cross tube) - (2) - 147574
80. Screw (stay to cross tube) - (2) - GHF120
81. Washer (locking) - (2) - GHF332
82. Nut - (2) - GHF201
83. Washer (locking) - (2) - GHF332
84. Nut (stay to radiator frame) - (2) - GHF201
Kits include all hoses for cooling and corresponding hose clips. Available in black or green.
85. Hose Kit (black) - (1) - RR1168
Hose Kit (green) - (1) - RR1168GREEN
To commission no. CF35000
85. Hose Kit (black) - (1) - RR1266
Hose Kit (green) - (1) - RR1266GREEN
From commission no. CF35001
85. Hose Kit (black) - (1) - RR1507
Hose Kit (green) - (1) - RR1507GREEN
86. Top Hose (black) - (1) - 148996
To engine no. CP50000.
Top Hose (green) - (1) - 154148
From engine no. CP50001 to CR12500.
Top Hose (black) - (1) - GZA971
From engine no. CR12501.
Top Hose (green) - (1) - GZA971GREEN
From engine no. CR12501.
87. Bottom Hose (curved, black) - (1) - 148993
To engine no. CP50000.
Bottom Hose (curved, green) - (1) - 154145
From engine no. CP50001 to CR12500.
Bottom Hose (curved, black) - (1) - GRH393
From engine no. CR12501.
Bottom Hose (curved, green) - (1) - GRH393GREEN
88. Pipe (steel, water return) - (1) - 145398
To commission no. CP75000.
Pipe (steel, water return) - (1) - 158417
From commission no. CP75001.
89. Bottom Hose (straight, black) - (1) - 148995
To engine no. CP50000.
Bottom Hose (straight, green) - (1) - 154147
From engine no. CP50001 to CR12500.
Bottom Hose (straight, black) - (1) - GRH392
All models.
Bottom Hose (straight, green) - (1) - GRH392GREEN
From engine no. CR12501.
90. Clip (hose clamping) - (6) - CS4024
'Supergrip' type.
Clip (hose clamping) - (6) - GHC1217
'Jubilee' type.
91. Bottle (overflow) - (1) - 137632
92. Cap (overflow bottle) - (1) - 137743
93. Grommet (protecting pipe in cap) - (1) - 616925
94. Pipe (overflow) - (1) - 137742
95. Bracket (overflow bottle) - (1) - 713544
96. Screw (bracket to wheel arch) - (2) - HU504
97. Washer (plain) - (2) - WP5
98. Washer (locking) - (2) - WL700101
99. Nut - (2) - HN2005
100. Stayrod (valance to wheel arch, LH) - (1) - 714768
Stayrod (valance to wheel arch, RH) - (1) - 714769
101. Nut (plain, stay rod to wheel arch) - (2) - GHF200
102. Washer (locking) - (2) - GHF331
103. Washer (plain) - (2) - 510795
104. Air Duct (radiator) - (1) - 910442
P.I. models.
105. Air Duct (radiator) - (1) - 910441
Carb models.
106. Fitting Kit (air duct) - (1) - 910442FK
P.I. models.
Fitting Kit (air duct) - (1) - 910441FK
Carb models.
107. Screw - (2) - YH6505
108. Washer (plain) - (2) - 510806
109. Nut (fix) - (2) - FU2585
110. Screw (stay rod and air duct to front valance) - (2) - 517385
111. Washer (locking) - (2) - 510506
112. Washer (plain) - (2) - 501795
113. Spire Nut (attached to front valance top flange) - (2) - FJ24074
114. Nut (plain, stay rod to wheel arch) - (1) - 502450
115. washer (locking) - (1) - 510506
116. washer (plain) - (1) - 510795
117. Strap Assembly (air cleaner support) - (1) - 153282
118. Anti-Freeze (1 litre) - (ar) - GAC2018
Anti-Freeze (5 litre) - (ar) - GAC2019
119. Radiator Leak Sealer - (ar) - GAC2056
120. Jointing Compound (80ml) - (ar) - GHF6093
121. WD40 (400ml can) - (ar) - GAC111
122. Studloc (Loctite, 10ml) - (ar) - GAC100
123. Grease (copper, anti-seize, 85gm) - (ar) - RX1345
1. Heater Assembly - (1) - 812301
Heater Assembly (reconditioned) - (1) - 812301R
Exchange.
2. Matrix - (1) - 812301MATRIX
3. Fan Motor - (1) - 521080
4. Fan - (1) - 512365
5. Spire Clip (securing fan) - (1) - GHF704
6. Rivet (motor to cradle) - (3) - GHF602
7. Grommet (motor to cradle) - (3) - GHF807
8. Cradle (fan motor) - (1) - 521080CR
9. Screw (cradle to casing) - (3) - HU503
10. Resistor - (1) - 515827
11. Rivet (securing resistor) - (2) - 574437
12. Fitting Kit (heater) - (1) - 812301FK
Items 13-21 included in fitting kit 812301FK.
13. Seal (rubber, heater air inlet to plenum) - (1) - 812301S
14. Screw (heater assembly to plenum) - (3) - HB708
15. Washer (plain) - (3) - WP167
16. Grommet (mounting screws to heater) - (3) - 17H5431X
17. Washer (plain) - (3) - 566375
18. Spacer (heater assembly to plenum) - (3) - 566374
19. Nut (heater assembly to bulkhead) - (1) - HN2007
20. Washer (plain) - (1) - 566581
21. Washer (rubber) - (1) - 612241
22. Label (heater, 'Smiths') - (1) - CRST267
23. Label (heater, 'Caution') - (1) - CRST127
Hose kits include all hoses for cooling and heating and corresponding hose clips. Available in black or green.
24. Hose Kit (black) - (1) - RR1168
Hose Kit (green) - (1) - RR1168GREEN
Fuel injection models.
To commission no. CF35000.
24. Hose Kit (black) - (1) - RR1266
Hose Kit (green) - (1) - RR1266GREEN
From commission no. CF35001.
24. Hose Kit (black) - (1) - RR1507
Hose kit (green) - (1) - RR1507GREEN
25. Hose (water, outlet, black) - (1) - 623285
26. Hose (water, inlet, black) - (1) - 623284
27. Clamp (hose securing, 'Supergrip' type) - (4) - CS4012
Clamp (hose securing, 'Jubilee' type) - (4) - GHC406
28. Gasket (rubber, connection to bulkhead) - (1) - 611040
29. Connection (bulkhead, heater hoses) - (1) - 611043
30. Screw (connection to bulkhead) - (2) - YJ2464
31. Spire Nut - (2) - FU2544
32. Hose (water, feed, black & yellow, to valve) - (1) - 622141
Early TR6.
Hose (water, feed, black, straight, to valve) - (1) - 627310
Late TR6.
Hose (water, feed, green, to valve) - (1) - 627310GREEN
Late TR6.
33. Hose (water, return, black & yellow, to metal pipe) - (1) - 622158
Early TR6.
Hose (water, return, black, straight, to metal pipe) - (1) - 627311
Late TR6.
Hose (water, return, green, to metal pipe) - (1) - 627311GREEN
Late TR6.
34. Clamp (hose securing, 'Supergrip' type) - (4) - CS4012
Clamp (hose securing, 'Jubilee' type) - (4) - GHC406
35. Pipe (heater return) - (1) - 214404
Pipe (heater return) - (1) - 214404SS
Stainless Steel.
36. Pipe (heater return) - (1) - 214405
Pipe (heater return) - (1) - 214405SS
Stainless Steel.
37. Nut (pipe) - (1) - 101302
38. Olive (sealing) - (1) - TL11
39. Water Valve Assembly - (1) - 565755
40. Adaptor (water valve to cylinder head) - (1) - 148435
41. Trunnion Kit (cable clamp) - (1) - 609123K
Includes trunnion and screw.
42. Trunnion (cable clamp) - (1) - 609123
Included in 609123K.
43. Screw (cable clamping) - (1) - 559980
Included in 609123K.
44. Cable Assembly (water valve control) - (1) - 622361
45. Grommet (on control cable) - (1) - 602037
46. Bezel (securing cable to switch plinth) - (1) - 566047
47. Knob (water valve control, pictorial type)* - (1) - 712903
48. Knob (water valve control, written type)* - (1) - 725372
49. Trunnion Kit (cable clamp) - (1) - 609123K
50. Trunnion (cable clamp) - (1) - 609123
51. Screw (cable clamping) - (1) - 559980
52. Cable Assembly (air distribution) - (1) - 622362
53. Bezel (securing cable to switch plinth) - (1) - 566047
54. Knob (air distribution, pictorial type)* - (1) - 712909
55. Knob (air distribution, written type)* - (1) - 725370
56. Switch (heater fan, push pull type) - (1) - 131812
57. Bezel (for heater switch) - (1) - 609795
58. Washer (under knob) - (1) - 128089
59. Knob (heater fan switch, pictorial type)* - (1) - 712911
60. Knob (heater fan switch, written type)* - (1) - 725371
61. Switch (heater fan, toggle type) - (1) - BCA4294
* Knob sets also available. See Electrical
62. Escutcheon (demister outlet) - (2) - 610181
63. Washer (plain) - (4) - WP138
64. Washer (locking) - (4) - WL205
65. Nut (escutcheon and nozzle attaching) - (4) - HN2005
66. Nozzle Assembly (demister, LH) - (1) - 806740
67. Nozzle Assembly (demister, RH) - (1) - 806741
68. Demister & Air Hose Kit - (1) - RR1330
Items 69-76 included in kit RR1330.
69. Hose (heater to demister nozzle, LH) - (1) - 602636
11 1/2" long x 1 1/2" diameter.
70. Hose (heater to demister nozzle, RH) - (1) - 602638
13 1/2" long x 1 1/2" diameter.
71. Clamp (hose securing) - (4) - CS4024
72. Hose (heater to 'Y' piece tube) - (1) - 715034
Drive's side, 14" long x 1 3/4" diameter.
73. Hose (heater to 'Y' piece tube) - (1) - 715031
Passenger's side, 18" long x 1 3/4" diameter.
74. Hose ('Y' piece tube to fascia louvre) - (2) - 715032
7 1/2" long x 1 3/4" diameter.
75. Hose ('Y' piece tube to footwell louvre) - (2) - 715033
11 1/2" long x 1 3/4" diameter.
76. Clamp (hose securing) - (12) - CS4030
77. Clamp (hose retaining) - (1) - 622151
Driver's side only.
78. Sleeve (PVC) - (1) - 575015
79. Tube ('Y' piece) - (2) - 622138
80. Louvre Assembly (fascia fresh air 'eye ball vent', metal) - (2) - 713040
To commission ni. CP/CC5000.
Louvre Assembly (fascia fresh air 'eye ball vent', plastic) - (2) - 720650
Commission no. CP/CC50001 to CR1/CF1.
Louvre Assembly (fascia fresh air 'eye ball vent', plastic) - (2) - 725776
From commission no. CR1/CF1.
81. Louvre Assembly (footwell fresh air 'eye ball vent', metal) - (2) - 713040
To commission no. CP/CC50000.
Louvre Assembly (footwell fresh air 'eye ball vent', plastic) - (2) - 720650
From commission no. CP/CC50001.
The plastic fascia fresh air louvre assemblies are interchangeable. The difference between the two plastic ones is a cosmetic bright finished edge on the later type. Other models from the Triumph range (Stag, Innsbruck) were fitted with similar vents to those in the TR6. The metal vents are retained in the fascia by a stud ring, clamps and nuts; the plastic vents are secured by clips moulded on the periphery of the louvre.
82. Heater Kit (uprated) - (1) - 812301UR
Includes uprated fan and motor.
83. Anti-Freeze (Unipart, 1 litre) - (ar) - GAC2018
Anti-Freeze (Unipart, 5 litre) - (ar) - GAC2019
Return to TR6 Index Page 
Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.