|
|
Triumph GT6 Brakes |
|
Page Contents
Discs & Fittings (All Models) Brake Pads & Fittings Brake Kits Calipers & Fittings (Type 16P - Imperial) Caliper & Fittings (Type 16PB - Imperial) Calipers & Fittings (Type 16PB - Metric) Mk1, Mk2 & Early Mk3 (Mk3 to KE/KF20000) Mk3 Late (KE/KF20001 onwards) Single Line System Tandem (Dual) Line System Brake Hoses Brake Pipe Kits Handbrake & Fittings Handbrake Cable & Fittings Front Cable Fittings Rear Cable Fittings ©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
![]()
Front Brakes
Rear Brakes
Brake Pedal & Fittings
Brake Master Cylinder
Brake Servo
Brake Pipes & Hoses
Handbrake & Cable
![]()
Note: GT6 Brake Calipers
Depending upon the model/year, the brake calipers have different drillings/position for the caliper mounting bolts, and the pistons/seals vary in size.
Different pads/shims are also fitted, and the calipers have either metric or imperial threads for the hydraulic fittings.
Please check carefully the type of calipers fitted.
Check your chassis number against our listings, then the caliper type fitted to your car. It is possible that the calipers could have been replaced (with non-original spec) by a previous owner. If you are in a ny doubt, please phone with as much information as possible, vehicle details, caliper type etc.
Brake Disc;
![]()
Standard (each) - (2) - 213227
![]()
Uprated (pair) - (1) - 213227UR
Bolt (disc to hub) - (8) - 113150
Washer (spring) - (8) - GHF333
Dust Shield (backplate);
![]()
Right Hand - (1) - 213232
![]()
Left Hand - (1) - 213233
Brake Pad Sets
Mk1, Mk2 & Mk3 Early (to KC56077, KE12389, KF12390)
Imperial Calipers.
Brake Pads (standard);
![]()
Pads only - (1) - GBP132
![]()
Pads & Fittings - (1) - RG1063
Brake Pads (uprated - Kevlar 'Green Stuff');
![]()
Pads only - (1) - GBP132GS
![]()
Pads & Fittings - (1) - RG1063UR
Mk3 Late (KE12390 & KF12391 onwards)
Metric Calipers.
Brake Pads (standard);
![]()
Pads only - (1) - GBP216
![]()
Pads & Fittings - (1) - RG1064
Brake Pads (uprated - Kevlar 'Green Stuff')
![]()
Pads only - (1) - GBP216GS
![]()
Pads & Fittings - (1) - RG1064UR
Shims, Pins & Clips;
Mk1, Mk2 & Early Mk3 (to KC56077, KE12389, KF12390) -
![]()
Shim (each) - (1) - 27H2953
![]()
Pin & Clip Kit (4 pins & 4 clips) - (1) - GBK1003
Mk3 Late (KE12390 & KF12391 onwards -
![]()
Shim Kit (4 shims) - (1) - GBK1019
![]()
Pin & Clip Kit (4 pins & 4 clips) - (1) - GBK1002

Brake Kits (front);
Mk1, Mk2 & Early Mk3 (to KC56077, KE12389, KF12390) -
Imperial calipers.
Disc & Pad Set (2 discs & 4 pads) -
![]()
Standard Discs & Pads - (1) - RG1059
![]()
Uprated Discs & Pads - (1) - RG1059UR
Mk3 Late (KE12390 & KF12391 onwards -
Metric calipers.
Disc & Pad Set (2 discs & 4 pads) -
![]()
Standard Discs & Pads - (1) - RG1060
![]()
Uprated Discs & Pads - (1) - RG1060UR
Brake Kits (front & Rear);
Mk1, Mk2 & MK3 (to KC56077, KE12389, KF12390) -
Imperial calipers.
Discs, Pads & Shoes (car set) -
![]()
Standard Discs, Pads & Shoes - (1) - RG1289
![]()
Uprated Discs, Pads & Standard Shoes - (1) - RG1289UR
Mk3 (from KE12390 & KF12391 to KE/KF20000) -
Metric Calipers.
Discs, Pads & Shoes (car set) -
![]()
Standard Discs, Pads & Shoes - (1) - RG1290
![]()
Uprated Discs, Pads & Standard Shoes - (1) - RG1290UR
Mk3 (KE/KF20001 onwards) -
Metric calipers. Non rotoflex driveshaft.
Discs, Pads & Shoes (car set) -
![]()
Standard Discs, Pads & Shoes - (1) - RG1291
![]()
Uprated Discs, Pads & Standard Shoes - (1) - RG1291UR
Mk1 & Mk2 (early, to KC56077)
Caliper;
Right Hand -
![]()
New - (1) - 307976
![]()
Reconditioned - (1) - 307976R
Left Hand -
![]()
New - (1) - 307977
![]()
Reconditioned - (1) - 307977R
Piston (caliper);
![]()
Standard - (4) - 510792
![]()
Stainless Steel - (4) - 510792SS
Repair Kit (for 2 calipers) - (1) - 601960
Bleed Screw - (2) - 556508A
Dust Cap/Cover - (2) - STC1913
Mounting Bolt (caliper) - (4) - 132439
Washer (spring) - (4) - GHF335
For caliper bolt.
Mk2 Late & Early Mk3 (from KC56078 to KE12389/KF12390)
Caliper;
Right Hand -
![]()
New - (1) - 307976
![]()
Reconditioned - (1) - 307976R
Left Hand -
![]()
New - (1) - 307977
![]()
Reconditioned - (1) - 307977R
Piston (caliper);
![]()
Standard - (4) - 157685
![]()
Stainless Steel - (4) - 157685SS
Repair Kit (for 2 calipers) - (1) - 519731
Bleed Screw - (2) - 556508A
Dust Cap/Cover - (2) - STC1913
Mounting Bolt (caliper) - (4) - 132439
Washer (spring) - (4) - GHF335
For caliper bolt.
Mk3 Late (from KE12390 & KF12391)
Caliper;
Right Hand -
![]()
New - (1) - 159027
![]()
Reconditioned - (1) - 159027R
Left Hand -
![]()
New - (1) - 159026
![]()
Reconditioned - (1) - 159026R
Piston (caliper);
![]()
Standard - (4) - 157685
![]()
Stainless Steel - (4) - 157685SS
Repair Kit (for 2 calipers) - (1) - 519731
Bleed Screw - (2) - 556508A
Dust Cap/Cover - (2) - STC1913
Mounting Bolt (caliper) - (4) - 132439
Washer (spring) - (4) - GHF335
For caliper bolt.
Early Non-Rotoflex & Early Rotoflex Driveshafts
1.25" Rear Brake Shoes - Manually Adjusted.
Brake Shoe Set (per car) - (1) - GBS750
Brake Drum - (2) - 203077
Screw (drum retaining) - (4) - V5435
Brake Back Plate;
Mk1 -
Non-Rotoflex.
![]()
Right Hand - (1) - 209260
![]()
Left Hand - (1) - 209259
Mk2 & Mk3 -
Rotoflex.
![]()
Right Hand - (1) - 214817
![]()
Left Hand - (1) - 214818
Tab Washer * - (4) - 121860
Bolt (tab washer) * - (8) - 121862
* Mk1 only, non-rotoflex system. Locates brake backplate & oil seal housing to inner hub.
Tab Washer ** - (4) - 149426
Bolt (tab washer) ** - (8) - SH606071
** Mk2 & Mk3 rotoflex system. Locates brake backplate to vertical link.
Brake Shoe Retaining Kit - (1) - RG1197
Per car, includes 4 pins, 4 springs & 4 cup washers.
Pin (brake shoe retaining) - (4) - 120124
Spring (brake shoe retaining) - (4) - 504877
Cup Washer (brake shoe retaining) - (4) - 17H4374
Spring (brake shoe pull off);
![]()
Upper Spring (double coil) - (2) - 105690
![]()
Lower Spring (single coil) - (2) - 105689
Adjuster Assembly - (2) - 519762
Nut (adjuster to backplate) - (4) - GHF200
Washer - (4) - GHF321
Wheel Cylinder;
Mk1 -
![]()
To KC7278 (¾" bore) - (2) - GWC1208
![]()
From KC7279 (5/8" bore) - (2) - GWC1202
![]()
Mk2 (all models) (5/8" bore) - (2) - GWC1202
![]()
Mk3 (to KE/KF20000) (11/16" bore) - (2) - GWC1110
Wheel Cylinder Repair Kit;
Mk1 -
![]()
To KC7278 (¾" bore) - (2) - 507865
![]()
From KC7279 (5/8" bore) - (2) - 18G9004
![]()
Mk2 (all models) (5/8" bore) - (1) - 18G9004
![]()
Mk3 (to KE/KF20000) (11/16" bore) - (1) - 18G8642
Retaining Plate (cylinder to backplate) - (2) - 120138
Spring - (2) - 519758
Dust Cover (wheel cylinder) - (2) - 120139
Bleed Screw - (2) - 556508A
Operating Lever (handbrake) - (2) - 123135
Right hand & left hand.
Split Pin (lever to cylinder) - (2) - PC34
Late Non-Rotoflex Driveshafts
1.5" Rear Brake Shoes - Self Adjusting.
Brake Shoe Set (per car) - (1) - GBS746
Brake Drum - (2) - GDB101
Screw (drum retaining) - (4) - V5435
Brake Back Plate;
![]()
Right Hand - (1) - 209260
![]()
Left Hand - (1) - 209259
Tab Washer * - (4) - 149426
Bolt (tab washer) * - (8) - SH606071
* Locates brake backplate to vertical link.
Brake Shoe Retaining Kit - (1) - RG1197
Per car, includes 4 pins, 4 springs & cup washers.
Pin (brake shoe retaining) - (4) - 120124
Spring (brake shoe retaining) - (4) - 504877
Cup Washer (brake shoe retaining) - (8) - 17H4374
Springs (brake shoe pull off);
![]()
Upper (double coil) - (2) - 519802
![]()
Lower (single coil) - (2) - 519801
'H' Tappet (locates in trailing brake shoe) - (2) - 519760
Wheel Cylinder;
![]()
Original Type (7/8" bore) - (2) - GWC1501
![]()
Replacement (0.7" bore) - (2) - GWC1121
Fit in pairs!
Wheel Cylinder Repair Kit;
![]()
Original Type (GWC1501) (7/8" bore) - (2) - UKC1261
![]()
Replacement Type (GWC1121) (0.7" Bore) - (1) - UKC1258
Retaining Plate (cylinder to back plate) - (2) - 120138
Spring - (2) - 519758
Dust Cover (wheel cylinder) - (2) - 519695
Bleed Screw - (2) - 556508A
Operating Lever (handbrake);
![]()
Right Hand - (1) - 519800
![]()
Left Hand - (1) - 519799
Split Pin (lever to cylinder) - (2) - PC34
Brake Light Switch - (1) - 134529
Spring (pedal return) - (1) - 114438
Rubber Boot/Cover (master cylinder) - (1) - 125217
Pedal Rubbers (clutch/brake) :-
![]()
Mk1 & Mk2 - (2) - 122289
![]()
Mk3 - (2) - 150881
Brake Master Cylinder;
![]()
All Vehicles to KE/KF20000 - (1) - GMC209
![]()
Mk3 from KE/KF20001 - (1) - GMC219
Master Cylinder Repair Kit;
![]()
All Vehicles to KE/KF20000 - (1) - 521154
.07" bore.
![]()
Mk3 from KE/KF20001 - (1) - GRK1077
0.75" bore.
Clevis Pin (push rod) - (1) - PJ8808
Filler Cap - (1) - RTC253A
Seal (filler cap) - (1) - 606404A
Clutch/Brake Fluid;
![]()
Unipart (DOT 3) - (ar) - GBF103
1 litre.
Silicone -
![]()
0.5 litre - (ar) - RX1327
![]()
1 litre - (ar) - RX1326
Brake Master Cylinder;
![]()
All Vehicles to KE/KF20000 - (1) - 213690
![]()
Mk3 from KE/KF20001 - (1) - 218947
Master Cylinder Repair Kit;
![]()
All Vehicles to KE/KF20000 - (1) - 517662
![]()
Mk3 from KE/KF20001 - (1) - RTC274
Reservoir & Cap - (1) - 517333
Clutch/Brake Fluid;
![]()
Unipart (DOT 3) - (ar) - GBF103
1 litre.
Silicone -
![]()
0.5 litre - (ar) - RX1327
![]()
1 litre - (ar) - RX1326
NOTE: Original Girling servo's part no 313095, (fitted to late Mk3's only) are no longer available.
The lockheed (universal, remote mounted) brake servo kit that we list here (RH5272) is not a direct replacement for the original Girling servo, but can be used if the entire kit is fitted.
Brake Servo Kit - (1) - RH5272
Lockheed/universal.
This universal, remotely mounted servo comes complete with brackets and fittings.
It can be retro fitted to any GT6, but not as a direct replacement for the factory fitted Girling servo.
Service/Repair Kit (Girling) - (1) - RTC488
Use only for original Girling type servo part no 313095.
Vacuum Hose (manifold to servo) - (1) - 159230
For original Girling type servo only.
Front Flexible Hose;
![]()
Standard - (2) - GBH203
![]()
Braided - (2) - GBH203GR
Rear Flexible Hose;
Standard -
![]()
Right Hand - (1) - GBH203
![]()
Left Hand - (1) - GBH204
Braided -
![]()
Right Hand - (1) - GBH203GR
![]()
Left Hand - (1) - GBH204GR
Braided Hose Set (set of 4) - (1) - RG1292GR
Copper Brake Pipe Kit (single line system);
Includes all brake pipes fully made up to correct length with imperial fittings, but not hoses.
Mk1 (Non-Rotoflex) -
![]()
RHD - (1) - RG1194
![]()
LHD - (1) - RG1194LHD
Mk2 & Mk3 (Rotoflex) -
![]()
RHD - (1) - RG1067
![]()
LHD - (1) - RG1067LHD
Mk3 (Non-Rotoflex) -
![]()
RHD - (1) - RG1068
![]()
LHD - (1) - RG1068LHD
Copper Brake Pipe Kit (tandem/dual line system);
Includes all brake pipes fully made up to correct length with imperial fittings, but not hoses.
Mk3 (Non-Rotoflex) -
![]()
RHD - (1) - RL1220
![]()
LHD - (1) - RL1220LHD
Junction/Manifold (brake pipe);
![]()
3 Way Connector - (1) - BTB657
![]()
4 Way Connector - (1) - 565719
Clip (brake pipe);
![]()
Plastic Clip (single) - (ar) - GHF1192
![]()
Plastic Clip (double) - (ar) - 625521A
Brake Fluid
![]()
Unipart (DOT 3) - (ar) - GBF103
1 litre.
Silicone -
![]()
0.5 litre - (ar) - RX1327
![]()
1 litre - (ar) - RX1326
Handbrake Lever Assembly - (1) - UKC6691
Gaiter (handbrake lever) - (1) - 705789
Grip (lever) - (1) - UKC3918
Spring (fits on release rod/button) - (1) - 104740
Pawl - (1) - 104737
Pin (pawl to lever) - (1) - 104738
Ratchet - (1) - 148083
Fulcrum Pin - (1) - 104743
Lever & ratchet to mounting bracket.
Circlip (fulcrum pin locating) - (1) - AS610032
Washer (circlip to fulcrum pin) - (1) - WA112081
Front Cable (short) - (1) - 121766
Cable runs from handbrake lever to compensator lever UKC1788.
Rear (main) Cable;
Cable runs from compensator to rear brakes.
![]()
Mk1 (Non-Rotoflex) - (1) - 133915
![]()
Mk2 & Mk3 (Rotoflex) - (1) - 149353
![]()
Mk3 (Non-Rotoflex) - (1) - 159848
Nut (adjusting, cable to fork) - (1) - GHF200
Fork (front cable to handbrake lever) - (1) - 104749
Nut (square, locates inside fork) - (1) - NQ2707
Clevis Pin (fork to handbrake lever) - (1) - 104750
Split Pin (clevis pin retaining) - (1) - PC5
Washer (split pin to lever/fork) - (1) - GHF300
Relay/Equaliser Lever (inc bush) - (1) - UKC1788
Bush Only (for lever UKC1788) - (1) - 121757
Seal;
![]()
Upper (felt) - (1) - 121760
![]()
Lower (rubber) - (1) - 121755
Pivot Pin (relay lever to body) - (1) - 121759
Tab Washer (for pivot pin 121759) - (1) - 121758
Compensator (main cable to equaliser UKC1788) - (1) - 121699
Clevis Pin (compensator to equaliser) - (1) - PJ8807
Split Pin (for clevis pin PJ8807) - (1) - PC10
Washer (for clevis pin PJ8807) - (1) - GHF301
Pull-Off Spring (handbrake) - (2) - 131806
'L' Bracket (pull-off spring anchor) - (2) - 131807
Nut (for bracket 131807, 2 per bracket) - (4) - GHF200
Fork (cable to operating lever) - (2) - 104749
Nut (square, locates inside fork 104749) - (2) - NQ2707
Clevis Pin (fork to lever) - (2) - 104750
Split Pin (clevis pin retaining) - (2) - PC5
Washer (split pin to lever/fork) - (2) - GHF300
Operating Lever (cable to wheel cylinder);
![]()
Manually Adjusted Brakes - (2) - 123135
Rh & LH.
Self Adjusting Brakes -
![]()
Right Hand - (1) - 519800
![]()
Left Hand - (1) - 519799
Return to GT6 Index Page ![]()
![]()
![]()
Home
About Rimmer Bros.
Prices
General Info
Delivery
How to Order
Your Order Form
News
Restoration Projects
Picture Library
Triumph Links
Free Catalogue
Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.