|
|
|
Triumph GT6 Front Suspension |
|
Page Contents
Mk1, Mk2 & Mk3 (Mk3 to KE/KF20000) Mk3 (from KE/KF20001) All Models Front Spring - Shock Absorber & Lower Wishbone
Shock Absorber Packages Shock Absorber & Front Spring Packages Rear Shock Absorber Conversion Brackets ©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Front Anti-Roll Bar
Front Hub & Upper Wishbones
Front Spring - Shock Absorber & Lower Wishbone
Uprated Suspension Packages
Anti-Roll Bar - Not Available Use 217033K
Anti-Roll Bar Conversion Kit - (1) - 217033K
The original anti-roll bar is no longer available. This conversion kit allows the later type bar to be fitted to early cars.
Kit includes anti-roll bar, bushes, clamps, 'U' bolts, nuts & washers.
Overhaul Kit (anti-roll bar);
For original spec anti-roll bar.
Includes 2 x links 125481/125482, 2 x nuts GHF224, 2 x studs 125074, 2 x nuts GHF223,
2 x bushes 123998, 2 x clamps 123502, 2 x 'U' bolts 123694, 4 x nuts GHF222 and all washers.
With Standard Bushes - (1) - RH5064
With Polyurethane Bushes - (1) - RH5064POLY
Bush (roll bar mounting);
Standard - (2) - 123998
Polyurethane - (2) - 123998POLYSPIT
Clamp (bush retainer) - (2) - 123502
'U' Bolt - (2) - 123694
Nut - (4) - GHF222
Washer - (4) - GHF332
Anti-Roll Bar - (1) - 217033
Overhaul Kit (anti-roll bar);
Includes 2 x links 125481/125482, 2 x nuts GHF224, 2 x studs 125074, 2 x nuts GHF223,
2 x bushes 155310, 2 x clamps 155308, 2 x 'U' bolts 155306, 4 x nuts GHF222 and all washers.
With Standard Bushes - (1) - RL1286
With Polyurethane Bushes - (1) - RL1286POLY
Bush (roll bar mounting);
Standard - (2) - 155310
Polyurethane - (2) - 155310POLYSPIT
Clamp (bush retainer) - (2) - 155308
'U' Bolt - (2) - 155307
Nut - (4) - GHF222
Washer - (4) - GHF332
Link (anti-roll bar);
Right Hand - (1) - 125481
Left Hand - (1) - 125482
Nut (link mounting to suspension) - (2) - GHF224
Washer - (2) - WA600071
Stud (link to roll bar) - (2) - 125074
Washer - (2) - GHF333
For stud 125074.
Washer - (2) - WA600071
For stud 125074.
Nut - (2) - GHF223
For stud 125074.
Top Wishbone & Bush - (4) - 119272
Bush Only;
Standard - (4) - 119451
Polyurethane - (4) - 119451POLY
Upper Suspension Overhaul Kit;
Per side & includes 1 x ball joint GSJ155, 2 x bolts BH605181, 2 x nuts GHF222, 2 x washers GHF332,
1 x nut GHF224, 1 x washer WD600071, 2 x bushes 119451, 2 x bolts BH606181, 2 x nuts GHF223.
With Standard Bushes - (2) - RH5080
With Polyurethane Bushes - (2) - RH5080POLY
Bolt (wishbone rear) - (4) - BH606181
Nut (nyloc) - (4) - GHF223
For bolt BH606181.
Ball Joint - (2) - GSJ155
Nut (nyloc) - (2) - GHF224
Ball joint to link.
Washer (locking) - (2) - WD600071
For nut GHF224.
Bolt (ball joint to wishbone) - (4) - BH605181
Nut - (4) - GHF222
For bolt BH605181.
Washer - (4) - GHF332
For bolt BH605181.
Vertical Link;
Right Hand - (1) - GSJ267
Left Hand - (1) - GSJ264
Grease Nipple - (2) - LN30041
Grease Plug - (2) - FAM581
Alternative to LN30041.
Seal (for lower trunnion) - (2) - 122126
Steering Arm;
Right Hand - (1) - 205504
Left Hand - (1) - 205505
Water Shield - (2) - 138559
Seal (caliper mounting plate to link) - (2) - 138051
Caliper Mounting Plate;
Right Hand - (1) - 145106
Left Hand - (1) - 145107
Bolt (front lower) * - (2) - 118324
Nut (nyloc) * - (2) - GHF223
Bolt (rear lower) * - (2) - SH606101
Washer (spring) - (2) - GHF333
* Caliper mounting plate (lower) & tie rod to vertical link.
Bolt (upper) ** - (4) - GHF120
Washer (spring) ** - (2) - GHF333
** Caliper mounting plate (upper) to vertical link.
Stub Axle - (2) - 132065
Nut (stub axle to vertical link) - (2) - 252165
Washer - (2) - WP12
For nut 252165.
Front Hub Bearing Kit - (2) - GHK1011
Per side, includes 1 x bearing GHB101, 1 x bearing GHB102, 1 x seal GHS146.
Hub Seal - (2) - GHS146
Hub Bearing (inner) - (2) - GHB101
Hub Assembly;
Standard - (2) - 145007
Alloy - (2) - 145007ALLOY
Wheel Stud Only - (4) - 21H5774
Hub Bearing (outer) - (2) - GHB102
'D' Washer - (2) - 132666
Nut (castle headed) - (2) - LN2211
Split Pin - (2) - PC20
Grease Cap/Cover - (2) - 132665
Front Shock Absorber (inc bushes);
Standard - (2) - GSA366
Supplied in singles.
Spax -
Supplied in pairs.
Ride Adjustable - (1) - GSA366SPAX
Ride/Height Adjustable - (1) - GSA366SPAXAS
Koni -
Supplied in pairs.
Ride Adjustable - (1) - GSA366KONI
Gaz -
Supplied in pairs.
Ride Adjustable - (1) - GSA366GAZ
Ride/Height Adjustable - (1) - GSA366GAZAS
Bush Only (shock absorber lower);
Standard - (2) - 119450
Polyurethane - (2) - 119450POLY
Bolt (shock absorber lower to wishbone) - (2) - BH607201
But - (2) - GHF224
For bolt BH607201.
Washer - (2) - WD600071
For bolt BH607201.
Front Road Spring;
Standard - (2) - 212425
Uprated - (2) - 212425UR
Spring Compression Tool - (1) - RX1328
Bush (shock absorber, upper);
Standard - (4) - 517985
Polyurethane - (4) - 517985POLY
Retainer (bush) - (4) - 147631P
Spring Seat/Top Plate - (2) - 122137
Nut (spring seat retaining) - (6) - GHF221
Washer - (6) - GHF300
For nut GHF221.
Lower Wishbone & Bush;
Right Hand - (1) - 206685
Left Hand - (1) - 206686
Lower Inner Suspension Overhaul Kit;
Per side, includes 2 x bushes 119451, 2 x bolts BH606201, 2 x nuts GHF223.
With Standard Bushes - (2) - RG1193
With Polyurethane Bushes - (2) - RG1193POLY
Bush Only;
Standard - (4) - 119451
Polyurethane - (4) - 119451POLY
Strut (wishbone bracing) - (2) - 125733
Bolt (rear mounting bracket/wishbone) - (4) - BH606201
Nut (nyloc) - (4) - GHF223
Mounting Bracket (wishbone);
Front - (2) - 130757
Rear - (2) - 130758
Shim (adjusting) - (ar) - 122022
Nut (to mounting bracket) - (4) - GHF223
Washer - (4) - GHF302
For nut GHF223.
Trunnion Bush Kit - (2) - 514191
Per side, includes 1 x spacer 140983, 2 x bushes 140892, 2 x inner shields 140894, 2 x seals 122534, 2 x outer shields 140985.
Trunnion Overhaul Kit;
Per side, includes 1 x trunnion, 1 x bolt 119142, 1 x nut GHF224, 1 x washer WD600071, 1 x seal 122126, 1 x bush kit 514191.
Right Hand - (1) - RG1190
Left Hand - (1) - RG1191
Trunnion Overhaul Kit (per car) - (1) - RG1192
Includes 1 of each kit RG1190 & RG1191.
Lower Trunnion;
Right Hand - (1) - 140919
Left Hand - (1) - 140920
Seal (for lower trunnion) - (2) - 122126
Bolt (trunnion to wishbone) - (2) - BH607201
Nut - (2) - GHF224
For bolt BH607201.
Washer - (2) - WD600071
For nut GHF224.
Tube/Spacer (for trunnion) * - (2) - 140893
Shield (outer) * - (4) - 140895
Seal * - (4) - 122534
Bearing (nylon) * - (4) - 140892
Shield (inner) * - (4) - 140894
* Items included in trunnion bush kit 514191.
ADJUSTABLE (ON CAR)
28 point adjustment, dyno tested. Handbuilt, matching units. Also available with adjustable spring seat (front).
Designed and developed by Motorsports Engineers. 2 year warranty.
ADJUSTABLE (OFF CAR)
Specifically designed for each application. Individually tested until optimum in handling and comfort is reached.
Will usually outlive your car.
ADJUSTABLE (ON CAR)
36 point fine tune settings. Zinc plated bodies. Double lip seal + 'O' ring on piston rod. Fully rebuildable.
Top quality. Also available with adjustable spring seat (front). Each unit tested and supplied with individual dyno read-out.
3 year warranty. British made.
Mk2 & Early Mk3 (Rotoflex);
Packs include 4 adjustable shock absorbers.
Spax (ride adjustable) - (1) - RG1184
Spax (ride/height adjustable) - (1) - RG1184SA
Gaz (ride adjustable) - (1) - RG1184GAZ
Gaz (ride/height adjustable) - (1) - RG1184SAGAZ
Koni (ride adjustable) - (1) - RG1185
Mk1 & Late Mk3 (Non-Rotoflex);
Packs include 4 adjustable shock absorbers.
Spax (ride adjustable) - (1) - RL1358
Spax (ride/height adjustable) - (1) - RL1358SA
Gaz (ride adjustable) - (1) - RL1358GAZ
Gaz (ride/height adjustable) - (1) - RL1358SAGAZ
Koni (ride adjustable) - (1) - RL1359
Mk2 & Early Mk3 (Rotoflex);
Packs include 4 adjustable shock absorbers & 2 uprated front springs.
Spax (ride adjustable) - (1) - RG1186
Spax (ride/height adjustable) - (1) - RG1186SA
Gaz (ride adjustable) - (1) - RG1186GAZ
Gaz (ride/height adjustable) - (1) - RG1186SAGAZ
Koni (ride adjustable) - (1) - RG1187
Mk1 & Late Mk3 (Non-Rotoflex);
Packs include 4 adjustable shock absorbers & 2 uprated front springs.
Spax (ride adjustable) - (1) - RG1188
Spax (ride/height adjustable) - (1) - RG1188SA
Gaz (ride adjustable) - (1) - RG1188GAZ
Gaz (ride/height adjustable) - (1) - RG1188SAGAZ
Koni (ride adjustable) - (1) - RG1189
Rotoflex
The bracket kit allows the top shock absorber mountings to be located onto the brackets which are in turn mounted directly onto the chassis. This offers a more positive location (directs stress loading away from wheel arches & on to chassis) and improves handling. The brackets are designed to be used with shock absorber GDA4011 which is available in either standard or a variety of uprated specifications.
Bracket Kit only - (1) - RG1305
Bracket Kit & Rear Shocks (pair);
Standard - (1) - RG1306
Spax - (1) - RG1306SPAX
Koni - (1) - RG1306KONI
Gaz - (1) - RG1306GAZ
Return to GT6 Index Page 
Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.