Parts Spares & Accessories for Triumph Range Rover Land Rover Rover by Mail Order - Rimmer Bros Triumph Spitfire Parts Spares & Accessories

Triumph Spitfire Cooling & Heating

Page Contents
-

Water Pump/Cooling Fan & Fan Belt
Water Pump Housing & Thermostat
Radiator, Hoses & Expansion Bottle
Radiator Mountings & Deflector Boards
Oil Cooler Kit (Engine)
Heater Unit
Heater Controls & Water Valve
Heater Hoses & Pipes
Screen Demister Vents
Hose Clips
Kenlowe Kits

-

Water Pump/Cooling Fan & Fan Belt



Mk1, Mk2 & Mk3



All Markets

Water Pump - (1) - GWP200
Stud (pump to housing) - (3) - TE605105
Nut - (3) - GHF201
Washer - (3) - GHF332
Gasket (pump to housing) - (1) - 138701
Kenlowe Fan Kit - (1) - RL1204
Sensor Only (Kenlowe Fan) - (1) - KLM1416

Fan Belt;
Mk1, Mk2 & early Mk3 - (1) - GCB11038
Mk3 early to FD11147E.
Mk3 (late) - (1) - GCB11025
Mk3 from FD11148E.

Fan Blades (4 blade metal) - (1) - 147972
Note: Mk1 & Mk2's for the home market were originally fitted with 2 blade fans which are no longer available.
Nut (pulley to shaft) - (1) - GHF272
Washer - (1) - WP181
Setscrew (fan to pulley) - (4) - SH604051
Washer (spring) - (4) - GHF331


MkIV & Early 1500



Non-Viscous Type Fan
Uk market to FH105733.
European market to 1st Jan 1976.
Not fitted to USA spec vehicles.


Water Pump - (1) - GWP128
Stud (pump to housing) - (3) - TE605105
Nut (for stud TE605105) - (3) - GHF201
Gasket (pump to housing) - (1) - 138701
Kenlowe Fan Kit - (1) - RL1204
Sensor only (Kenlowe fan) - (1) - KLM1416
Fan Belt - (1) - GCB11088
Fan Blades (7 blade plastic) - (1) - RKC2126
Setscrew (fan to pulley) - (4) - GHF117
Washer (spring) - (4) - GHF331


Late 1500



Viscous Type Fan
Uk models from FH105734.
European market from 1st Jan 1976.
USA market to FM95000.


Water Pump - (1) - UKC774
Stud (pump housing) - (3) - 100433
Nut (for stud 100433) - (3) - GHF201
Gasket (pump to housing) - (1) - 138701
Kenlowe Fan Kit - (1) - RL1204
Sensor only (Kenlowe fan) - (1) - KLM1416
Fan Belt - (1) - GCB11100
Fan Blades (13 blade plastic) - (1) - RKC92
Viscous Coupling - (1) - UKC3532
Tolerance Ring - (1) - UKC759
Setscrew (coupling to fan) - (4) - GHF102
Nut (for GHF102) - (4) - GHF200
Washer (plain) - (4) - WC701121


1500 (Late USA Models)



Non-Viscous Type Fan
USA market from FM95001.
Factory fitted electric cooling fan.


Water Pump - (1) - GWP205
Stud (pump to housing) - (3) - 100433
Nut (for stud 100433) - (3) - GHF201
Gasket (pump to housing) - (1) - 138701
Kenlowe Fan Kit - (1) - RL1204
Sensor only (Kenlowe fan) - (1) - KLM1416
Fan Belt - (1) - GCB11100

Water Pump Housing & Thermostat





All UK & European Markets
USA markets to FM95000.


Housing (water pump/thermostat) - (1) - 144297
Housing has 2 tappings.
Suitable for all except original Mk1 pump fitted to FC68072E.
Gasket (pump top housing) - (1) - 138701

Stud (pump to housing);
For Non-Viscous Pump - (3) - TE605105
For Viscous Pump (1500 only) - (3) - 100433

Nut (for studs TE605105/100433) - (3) - GHF201
Gasket (housing to block) - (1) - 138702

Bolt (housing to block);
Long (2 3/4") - (1) - BH605221
Medium (2 3/8") - (1) - BH605191
Short (2 1/4") - (1) - BH605181

Washer (spring) - (3) - GHF332

Thermostat;
Standard 82°C - (1) - GTS104
Hot Climate (summer) 74°C - (1) - GTS102
Cold Climate (winter) 88°C - (1) - GTS106

Gasket (thermostat) - (1) - GTG103
Housing (thermostat) - (1) - 156333
Suitable for all except original Mk1 pump fitted to FC68072E.
Setscrew(housing to pump housing) - (1) - GHF103
Bolt (housing to pump housing) - (1) - BH605101
Washer (spring) - (2) - GHF332
Temperature Transmitter - (1) - GTR108

The Following Parts Are Not Listed
Adaptor (heater hose) - (1) - 138530
Screws into water pump housing alongside temperature transmitter.
Fibre Washer (for adaptor) - (1) - WF524




1500 (Late USA Models)

Non-Viscous Type Fan
USA markets only from FM95001.
Factory fitted electric cooling fan.


Housing (water pump/thermostat) - (1) - 144297
Gasket (pump to housing) - (1) - 138701
Stud (pump to housing) - (3) - 100433
Nut (for stud 100433) - (3) - GHF201
Gasket (housing to block) - (1) - 138702

Bolt (housing to block);
Long (2 3/4") - (1) - BH605221
Medium (2 3/8") - (1) - BH605191
Short (2 1/4") - (1) - BH605181

Washer (spring) - (3) - GHF332

Thermostat;
Standard 82°C - (1) - GTS104
Hot Climate (summer) 74°C - (1) - GTS102
Cold Climate (winter) 88°C - (1) - GTS106

Gasket (thermostat) - (1) - GTG103
Housing (thermostat) - (1) - TKC4164
Bolt (housing to pump housing) - (2) - BH605101
Washer (spring) - (2) - GHF332
Pressure/Filler Cap (13lb) - (1) - GRC114
Filler Neck - (1) - 152438
Gasket (filler neck to housing) - (1) - 154680
Setscrew (filler neck to housing) - (2) - SH605051
Washer (spring) - (2) - GHF332
Temperature Transmitter - (1) - GTR108

Radiator, Hoses & Expansion Bottle


Spitfire Radiators
Original Specification Summary
Early Mk1’s (to FC39925) had a 22” wide radiator (with 2 top hose connections) and a separate (steel) remote header tank with a 7lb pressure cap. Because of ‘over cooling’ the header tank was removed at FC39926 and a new radiator (still 22” wide) but with only 1 top hose connection was used. The overflow pipe now came from the pressure cap neck on the radiator and fed into a plastic overflow bottle located in front of the radiator.
The same cooling system - 22” wide radiator with a 7lb pressure cap - was used for all Mk2’s.
All Mk3’s were produced with a 16” wide radiator fitted with side extensions (allowing the same Mk1/Mk2 mounting cradle to be used). Mk3’s from FD48653 had a more efficient 16” radiator with a 13lb pressure cap.
The MkIV & 1500 retained the 16” radiator and 13lb pressure cap.
Replacement Radiators
We supply New and Reconditioned 16” radiators (recon’ fitted with new core), and New 22” radiators.
Important Note
With the exception of very early Mk1’s (with 2 top hose connections & separate header tank), our 22” full width radiators are suitable for ALL models (except late USA vehicles) with correct pressure cap.
Late USA spec vehicles from FM95001.
Although late USA models were originally fitted with a 22” wide radiator, they CANNOT be interchanged with a UK spec’ 22” radiator as the 13lb pressure (filler) cap for USA vehicles is located on the Water Pump/ Thermostat Housing, NOT on the radiator.

Early Mk1 Only



To FC39925
All markets


Radiator (22" wide) - (1) - 305897R
Hose Kit - (1) - RL1513
Includes all radiator/heater hoses & clips.
Top Hose (to thermostat housing) - (1) - GRH533
Bottom Hose (to water pump housing) - (1) - GRH265
Hose (to header tank) - (1) - 134696

Hose Clips;
For Top & Bottom Hose - (ar) - GHC913
For Header Tank Hose - (ar) - GHC811

Drain Tap - (1) - 132565
Header Tank (steel) - (1) - 136402
Pressure Cap (7lb) - (1) - GRC102
Overflow Pipe - (1) - 106102

Mounting Brackets;
Front - (1) - 134548
Rear - (1) - 134549

Setscrew - (4) - SH604041
Nut - (4) - GHF200
Washer (spring) - (4) - GHF331

Anti-Freeze (Unipart);
1 Litre - (ar) - GAC2018
1 Litre - (ar) - GAC2019

Radiator Sealant (pellet) - (ar) - GAC2056


Mk1 (late), Mk2, Mk3, MkIV & 1500



Mk1 Late from FC39925.
All UK & European markets.
USA markets to FM95000.


Radiator;
Mk1 (late, from FC39926) & all Mk2 -
22" Wide.
New/Replacement (13lb) - (1) - 402823FULLWIDTH
Mk3, MkIV & 1500 -
16" wide.
New (13lb) - (1) - 402823
Reconditioned (13lb) - (1) - 402823R
New/Replacement (13lb) - (1) - 402823FULLWIDTH

Radiator Cap;
7lb Pressure - (1) - GRC112
13lb Pressure - (1) - GRC114

Hose Kits;
Includes all radiator/heater hoses & clips.
Mk1 late (from FC39926) - (1) - RL1530
Mk2, Mk3 & early MkIV - (1) - RL1203
Early MkIV to FH59688E.
MkIV (late) & 150 - (1) - RL1034
Late MkIv from FH59689E.

Top Hose (all models) - (1) - GRH533

Bottom Hose;
Mk1 (late), Mk2, Mk3 & MkIV - (1) - GRH265
1500 - (1) - GRH532

Hose Clips;
For Top & Bottom hose - (4) - GHC913

Drain Tap - (1) - 132565
Overflow Bottle - (1) - 137632
Cap (overflow bottle) - (1) - 137743
Grommet (in cap) - (1) - 616925
Overflow Tube - (1) - ULC2122
Bracket - (1) - 141606
Screw - (1) - GHF120
washer (plain) - (1) - WP5
Washer (spring) - (1) - WL205
Nut - (1) - HN2005

Anti-Freeze (Unipart);
1 Litre - (ar) - GAC2018
5 Litre - (ar) - GAC2019

Radiator Sealant (pellet) - (ar) - GAC2056


1500 (Late USA Models)



Non-Viscous Type Fan
USA Markets only from FM85001
Equipped with Electric Cooling Fan


Radiator (22" wide);
New/Replacement (13lb) - (1) - RKC3787

Pressure Cap (13lb) - (1) - GRC114
Pressure cap is located on thermostat housing.
Sensor (electric fan) - (1) - TKC5021
Washer/Seal (sensor) - (1) - C457593A

Top Hose;
Right Hand - (1) - GRH620
Left Hand - (1) - GRH622

Bottom Hose - (1) - GRH621

Hose Clips;
For RH Top Hose - (ar) - GHC811
For LH Top Hose - (ar) - GHC913
For Bottom Hose - (ar) - GHC913

Overflow Bottle - (1) - 137632
Cap (overflow bottle) - (1) - 137743
Grommet (in cap) - (1) - 616925
Overflow Tube - (1) - UKC5080
Bracket (overflow bottle) - (1) - 137624
Screw (bracket) - (1) - GHF120
Washer (plain) - (1) - WP5
Washer (spring) - (1) - WL205
Nut - (1) - HN2005

Anti-Freeze (Unipart);
1 Litre - (ar) - GAC2018
5 Litre - (ar) - GAC2019

Radiator Sealant (pellet) - (ar) - GAC2056

Radiator Mountings & Deflector Boards



Mk1, Mk2, Mk3, MkIV & 1500



All UK & European Markets
USA Markets to FM95000


Lower Mounting Cradle - (1) - TKC1761
Setscrew (cradle to chassis) - (2) - SH605071
Washer (plain) - (2) - RTC610A
Nut (nyloc) - (2) - GHF222

Stay Bracket (stainless steel);
Right Hand - (1) - 209749SS
Left Hand - (1) - 209750SS

Setscrew (radiator to stay) - (4) - SH605071
Washer (plain) - (4) - WC701121
Washer (spring) - (4) - GHF331
Nut (plain) - (4) - GHF200
Setscrew (stay to chassis) - (2) - GHF105
Washer (spring) - (2) - GHF333
Washer (plain) - (2) - WM59
Nut (plain) - (2) - GHF202

Deflector Board;
Right Hand - (1) - 706844
Left Hand - (1) - 706843

Rivet (deflector to cradle) - (6) - 562403
Washer (for rivet 562403) - (6) - WM54
Setscrew (deflector to chassis) - (4) - GHF117
Washer (plain) - (4) - WC701121
Spire Clip - (4) - FQ3405-4


1500 (Late USA Models)



Non-Viscous Type Fan
USA Markets only from FM95001
Equipped with Electric Cooling Fan


Side Mounting Cradle - (2) - RKC3860
Mounting Bush/Rubber - (4) - UKC2225
2 upper & 2 lower.
Setscrew (cradle to chassis) - (2) - SH605071
Washer (plain) - (2) - RTC610A
Nut (nyloc) - (2) - GHF222
Side Mounting Bracket - (2) - ULC1733
Washer (Plain) - (8) - GHF300
Washer (spring) - (8) - GHF331
Nut (plain) - (8) - GHF200
Air Deflector - (1) - PKC488
Setscrew (deflector to chassis) - (2) - GHF117
Washer (plain) - (4) - GHF331
Nut (nyloc) - (2) - GHF200

Cooling Fan & Mounting

Electric Fan (factory fitted);
Lucas type (with captive studs) - (1) - RKC3325
Smiths Type - (1) - RKC3873

Brush Assembly - (1) - AEU1475
Cable/Harness - (1) - ULC2099
Relay - (1) - DRC1820A
Screw - (1) - GHF421
Spire Clip - (1) - AK606011
Sensor (electric fan) - (1) - TKC5021
Washer/Seal (sensor) - (1) - C457593A

Mounting Bush/Spacer (Lucas);
Fan & motor to fan cowl.
Bush - (3) - UKC5481
Grommet - (3) - UKC5480
Washer (plain) - (3) - GHF300
Washer (spring) - (3) - WL106041
GHF212 - () -

Mounting Bush/Spacer (Smiths);
Fan & motor to fan cowl.
Setscrew - (3) - SH105181
Bush - (3) - CRC1191
Grommet - (3) - CRC1190
Washer (plain) - (3) - WA105001
washer (spring) - (3) - WL105041
Nut - (3) - NH105181

Cowl (fan) - (1) - TKC5272
Seal (cowl) - (1) - ULC1518
Washer (plain) - (4) - GHF300
Washer (plain) - (4) - GHF331
Nut - (4) - GHF200

Oil Cooler Kit (Engine)



Engine Oil Cooler Kit - (1) - 514082
Includes oil cooler, fitting kit, filter adaptor, hoses & fittings.
Does not include thermostat.
Thermostat (engine oil cooler) - (1) - RS1456
Not included in oil cooler kit.



Heater Unit





Important Note: Vehicles to mid 1976 (approx) were fitted with a heater/demister system (heater outlets/demister vents & flexible tubing) with a 1 1/2" bore.
From mid 1976 (approx) the tubing diameter was increased to 1 3/4".

Heater Box & Matrix (reconditioned);
Mk1, Mk2 & Mk3 - (1) - 904140R
MkIV & 1500 - (1) - 910501R

Matrix Only;
Mk1, Mk2 & Mk3 - (1) - 904140MATRIX
MkIV & 1500 - (1) - 910501RMATRIX

Heater Motor Only (reconditioned);
Mk1, Mk2 & Mk3 (single speed) - (1) - 514088R
MkIV & 1500 (twin speed) - (1) - 518480R

Seal/Gasket (heater motor) - (1) - 614125
Resistor - (1) - 7H6926

Seal (inlet/outlet pipes);
Large - (2) - 616627
Small - (2) - 633679

Setscrew (heater mounting) - (4) - SH604071
Washer (spring) - (4) - GHF331
'D' Washer - (4) - 613941

The Following Parts Are Not Illustrated

Elbow/Flap (heater/air box draining);
Elbow (early Mk1 only) - (1) - 609156
Flap (all other models) - (1) - 616206

Heater Controls & Water Valve



Mk1, Mk2 & Mk3




NOTE: Heat distribution (passenger/screen) is controlled by manually operated flaps at each end of the heater unit underneath the dash.

Water Valve - (1) - 560611
Adaptor (valve to hose) - (1) - 724021FLANGE
'O' Ring (adaptor to valve) - (1) - C9928A
Bracket (water valve mounting) - (1) - 613493
Temperature Control Valve - (1) - 622361
To water valve, push/pull system.
Bezel (control cable) - (1) - 613314
Knob (control cable) - (1) - 704884
Switch (heater fan) - (1) - RTC430
Bezel (fan/switch) - (1) - 609795


MkIV & 1500




NOTE: Heat distribution lever 622236 also controls '2 speed' fan by pulling knob/lever out in two stages.

Water Valve - (1) - 724021
Adaptor (valve to hose) - (1) - 724021FLANGE
'O' Ring (adaptor to valve) - (1) - C9928A

Bracket;
Water Valve Mounting - (1) - 613493
Heater/Vent Controls - (1) - 622220

Lever/Control Assembly;
Temperature Control - (1) - 622237
Fan & Distribution - (1) - 622236

Knob & Grub Screw;
Temperature Control - (1) - 622228
Fan & Heat Distribution - (1) - 622229

Allen Key (for knob/grub screw) - (ar) - 622228KEY
Grub Screw Only - (ar) - 620750

Cable;
Temperature Control (to water valve) - (1) - 625687
Heat Distribution - (1) - 624193

Trunnion (cables to control levers) - (2) - 609123
Screw (cable to trunnion) - (2) - 559980

Grommet;
Bulkhead (for cable 625687) - (1) - 61917

Cable Tie (for cable 625687) - (ar) - 240431A

Spacers (control levers to dash);
Thin Spacer - (1) - 622235
Thick Spacer - (3) - 622224

Screw (control levers to dash) - (4) - GHF101
Washer (spring) - (4) - GHF331
Washer (plain) - (4) - WC701121
Trunnion (heat distribution cable to ventilator) - (1) - 609123
Screw (cable to trunnion) - (1) - 559980
Clamp (cable locating) - (1) - 108943
Washer (spring) - (1) - WL205
Screw (cable to clamp) - (1) - 511765

Facia/Escutcheon Panel (heater controls);
MkIV (to FH50000) - (1) - 713790
MkIV (from FH50001) & 1500 - (1) - 726870

Bulb (for 726870 only) - (1) - GLB286
Bulb Holder (for bulb GLB286) - (1) - 13H8690

Heater Hoses & Pipes



Mk1 Models Only

Non-Heated Inlet Manifold

Hose Kit;
Includes all radiator/heater hoses & clips.
To FC39925 - (1) - RL1513
Vehicles with remote steel header tank.
From FC39926 - (1) - RL1530

Adaptor (cylinder head to hose) - (1) - 57602
Located at top/rear of cylinder head next to engine lifting eye.

Hose (1 of each required);
Cylinder Head Adaptor to Water Valve - (1) - GZA983
Water Valve to Heater - (1) - 152525
Heater to Steel Return Pipe - (1) - 152523

Steel Return Pipe (to water pump);
Non-branched pipe runs behind exhaust manifold.
Stainless Steel - (1) - 209776SS

Adaptor (pipe to water pump) - (1) - 101343
Sleeve Nut (pipe to adaptor) - (1) - 101302
Olive (nut to adaptor) - (1) - TL11
Hose Clips - (ar) - GHC406

Mk2, Mk3 & Early MkIV

MkIV to FH59688E

Hose Kit - (1) - RL1203
Includes all radiator/heater hoses & clips.
Adaptor (cylinder head to hose) - (1) - 57602
Located at top/rear of cylinder head next to engine lifting eye.

Hose (1 of each required);
Cylinder Head Adaptor to Water Valve - (1) - GZA983
Water Valve to Heater - (1) - 152525
Heater to Steel Return Pipe - (1) - 152523
Return Pipe to Rear of Inlet Manifold - (1) - GZA1338
Water Pump to Front of Inlet Manifold - (1) - 149699

Adaptor (hose 149699 to housing) - (1) - 138530
Screws into water pump housing alongside temperature transmitter.
Fibre Washer (for 138530) - (1) - WF524

Steel Return Pipe (to water pump);
Branched pipe runs behind exhaust manifold.
Stainless Steel - (1) - 212416SS

Adaptor (pipe to water pump) - (1) - 101302
Olive (nut to adaptor) - (1) - TL11
Hose Clips - (ar) - GHC406

MkIV (late) & 1500

MkIV from FH59689E

Hose Kit - (1) - RL1034
Includes all radiator/heater hoses & clips.

Hose (1 of each required);
Inlet Manifold to Water Valve - (1) - GRH812
From upper 'T' piece on rear of inlet manifold.
Water Valve to Heater - (1) - 152525
Heater to Steel Return Pipe - (1) - 152523
Return Pipe to Rear of Inlet Manifold - (1) - 149699
To lower 'T' piece of rear of inlet manifold.
Water Pump to Front of Inlet Manifold - (1) - GZA2052

Adaptor (hose GZA2052 to housing) - (1) - 138530
Screws into water pump housing alongside temperature transmitter.
Fibre Washer (for 138530) - (1) - WF524

Steel Return Pipe (to water pump);
Branched pipe, runs behind exhaust manifold.
Mild Steel - (1) - 212935
Stainless Steel - (212935SS) -

Adaptor (pipe to water pump) - (1) - 101343
Sleeve Nut (pipe to adaptor) - (1) - 101302
Olive (nut to adaptor) - (1) - TL11
Hose Clips - (ar) - GHC406

Screen Demister Vents





NOTE: Vehicles to mid 1976 (approx) were fitted with a heater/demister system (heater outlets/demister vents & flexible tubing) with a 1 1/2" bore.
From mid 1976 (approx) the tubing diameter was increased to 1 3/4".


Demister Vent;
To Mid 1976 -
Right & Left Hand - (1) - 714434
From Mid 1976 -
Right Hand - (1) - YKC2640
Left Hand - (1) - YKC2639

Capping (demister vent) - (2) - 622812
Nut (vent to capping) - (4) - HN2005
Washer (spring) - (4) - WL205
Washer (flat) - (4) - WP5

Flexible Tubing;
To mid 1976 (RH & LH) - (2) - 602638
From mid 1976 (RH & LH) - (2) - 715032

Clips (flexible tubing) - (ar) - GHC1217

Hose Clips


Use as required.

3/8" to 1/2" - (ar) - GHC304
7/16" to 5/8" - (ar) - GHC405
1/2" to 3/4" - (ar) - GHC406
5/8" to 7/8" - (ar) - GHC507
3/4" to 1" - (ar) - GHC608
7/8" to 1 1/8" - (ar) - GHC709
1" to 1 3/8" - (ar) - GHC811
1 1/8" to 1 5/8" - (ar) - GHC913
1 3/8" to 2" - (ar) - GHC1015
1 1/2" to 2 1/8" - (ar) - GHC1217
2" to 2 3/4" - (ar) - GHC1622

Kenlowe Kits


Electric Cooling Fan
Use Less Fuel, Get More Power
Suitable for ALL Models.
Kenlowe Electric Cooling Fan Kit - (1) - RL1204
Fit a fuel efficient Kenlowe fan for economy.
Sensor Only (kenlowe fan) - (1) - KLM1416
Manual Override Switch Only - (1) - KLM1636



Engine Hotstart & Interior Pre-Heater Systems
The Ultimate in Comfort & Convenience.
Suitable for ALL Models.

Kenlowe 'Hotstart' -
Engine Pre-Heater - (1) - RX1361
Compact & easy to fit. Engine 'Hotstart' overcomes much of the discomfort, high fuel costs and engine wear associated with starting from cold - especially in winter, whether the vehicle is garaged or left out in the open.
Engine & Interior Pre-Heater - (1) - RX1362
Working in conjunction with the Engine 'Hotstart', this system also ensures the car interior is preheated too, giving you the benefits of demistable/de-iced windscreen/windows, before you start your journey.



- Return to Spitfire Index Page -

The Parts You Need
- Home - About Rimmer Bros. - Prices - General Info - Delivery - How to Order - Your Order Form
- News- Restoration Projects - Picture Library - Triumph Links - Free Catalogue - Contact Us

©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.

Sun, 18 May 2008