Original Trim Specification & Availability
The very first Spitfire was launched in October 1962, and production continued for nearly 20 years when the very last Spitfire 1500 rolled of the production line in August 1980. Consequently original Factory trim in mint condition is, to say the least, something of a rarity, which poses quite a few problems for those owners who wish to restore their classic Spitfire to original showroom condition. All is not lost ....

Re-Manufactured Trim
To overcome this problem we can supply virtually the entire range of Spitfire Interior trim items, though for the foreseeable future we will only be able to supply 'Matador Red' trim in the smooth 'Stag' grain (refer to "FOR THE RECORD" panel for full details), and if you prefer something a little bit more luxurious, you can order seat cover kits in real Leather.

Parts Listings & Part Numbers
We are a company dedicated to preserving the Triumph marque, and to that end we will endeavour, wherever possible, to re-introduce Interior Trim items that are currently unobtainable.
Throughout the 'Interior & Trim' section we have retained wherever possible, the original Factory part numbering system (apart from where we supply trim in Kits). This will prove useful if you are using our catalogue in conjunction with a BL parts book, and help you identify the trim fitted to your vehicle, you never know, the previous owner may have changed the seats!
We have also shown throughout this section the approximate year/range, chassis/commission/VIN number, and/or the trim characteristics, IE; material, colour, pattern etc.
Although on occasions we have listed Rh & Lh items individually (with their own part number), we strongly recommend you fit all trim items in pairs or vehicle sets to ensure a colour match.
There are a few exceptions due to manufacturing restrictions, where parts are only available in pairs or vehicle sets.

Has The Previous Owner Changed The Seats?
Before you order any seat trim, please ensure that your seat frame/trim is as specified by the factory.

Remember
Your trim may well be over 30 years old, so it will probably have faded in the sun, even in England, (or more likely colour washed with the rain!). If you are replacing the seat covers don't forget to check the seat frame, foams and fittings, if they are old & tired, or broken, they really wont compliment your new trim, especially if you're considering Leather seat covers.

FOR THE RECORD
Original Factory Vinyl Trim	Rimmer Bros Replacement Vinyl Trim
Smooth or Coarse Material? Smooth vinyl is classed as 'Stag' grain. Coarse vinyl is classed as '1290' grain	Remember Smooth vinyl is classed as 'Stag' grain. Coarse vinyl is classed as '1290' grain.
Mk1, Mk2 & Mk3 All vinyl trim/colours were in 'Stag' material.	Mk1, Mk2 & Mk3 All vinyl trim/colours are supplied in 'Stag' material.
MkIV (1970 to 1973) All vinyl trim/colours were in 'Stag' material. (1973 to 1975) All vinyl trim/colours were in '1290' material.	MkIV (1970 to 1973) All vinyl trim/colours are supplied in 'Stag' material. Due to the non-availability of the correct vinyl grain/material we are unable to supply Grey vinyl trim for early MkIVs. (1973 to 1975) * All vinyl trim/colours are supplied in '1290' material. *Except Matador Red. Due to the non-availability of the correct vinyl grain/ material we can only supply Matador Red in 'Stag' grain.
1500 To FH113677 all vinyl trim was in '1290' material. From FH113678 all vinyl trim was in 'Stag' material.	1500 Black vinyl trim is available in both '1290' and 'Stag' material. Beige vinyl trim is only available in '1290' material.

Door Trim Panels & Door Aperture Seals

Door Trim Panels;
Due to manufacturing restrictions door trim panels are only supplied in pairs.
Mk1 -
Vinyl material, smooth 'Stag' grain.
Black - (1) - RL1437BLACK
Blue - (1) - RL1437BLUE
Red - (1) - RL1437RED
Mk2 & Mk3 -
Vinyl material, smooth 'Stag' grain.
Black - (1) - RL1331BLACK
Midnight Blue - (1) - RL1331BLUEMID
Shadow Blue - (1) - RL1331BLUESHAD
Light Tan - (1) - RL1331LIGHTTAN
Red - (1) - RL1331RED
Beige - (1) - RL1331BEIGE
MkIV -
Vinyl material, smooth 'Stag' grain.
1970 - 1973 -
Black - (1) - RL1594BLACK
Shadow Blue - (1) - RL1594BLUESHAD
Red - (1) - RL1594RED
Tan - (1) - RL1594TAN
1973 - 1975-
Vinyl material, coarse '1290' grain.
Black - (1) - RL1610BLACK
Shadow Blue - (1) - RL1610BLUESHAD
Beige - (1) - RL1610BEIGE
Chestnut - (1) - RL1610CHESTNUT
Tan - (1) - RL1610TAN
1500 -
Black (coarse '1290' grain) - (1) - RL1610BLACK
Vehicles to FH113677.
Black (smooth 'stag' grain) - (1) - RL1594BLACK
Vehicles from FH113678.
Beige (coarse '1290' grain) - (1) - RL1610BEIGE
Vehicles to FH113678.

Clip Kit (door trim, pack of 44) - (1) - RH5127
Clip (door trim, each) - (4) - 608511
Plastic 'Bucket' (for clip, fit inside door) - (ar) - 613769

Door Capping;
Right Hand - (1) - 727591
Left Hand - (1) - 727581

Seal (door surround);
Rubber/bristle.
Black - (2) - RX3000BLACK
Shadow Blue - (2) - RX3000BLUESHAD

Seal - 'A' Post Upper;
'A' Post/windscreen frame to door drop glass.
Mk1, Mk2 & Mk3 - (2) - 620913
MkIV & 1500 - (2) - 620403

Water Curtain (MkIV & 1500);
Small - (2) - 632200
Large - (2) - 822559

Sound Deadening Pad - (ar) - RB7145
Self adhesive pad (21" x 8"). Fits on inside of body panels.
Screw & Cup-Washer Pack - (ar) - RH5249
General purpose, includes 20 self tapping screws & cup washers.
Adhesive (carpet/trim) - (ar) - RX1353
1 litre. General adhesive for trim panels & carpet.

Low-Back Seats & Fittings (Mk1, Mk2, Mk3)

---

Original Seat Frame Specification & Fitment
Mk1 & Mk2;
All Markets (worldwide). Non-reclining, non-headrest, seat tilts.
Bucket type low-back frame with solid seat back (squab).
Mk1: Seat cushion (base) fitted into a deep metal spring case.
Mk2: Seat cushion (base) fitted into a deep wire basket.
Mk3;
UK & All European Markets.
USA models 1967 only.
Non-reclining, non-headrest, seat tilts.
Bucket type low back frame with solid seat back (squab).
Seat cushion (base) fitted into a deep wire basket.

Special Note: USA Mk3 Models.
For 1968, USA spec Mk3s were fitted with a low-back seat with a tubular frame which used rubber straps across the back.
The seats were reclining, non-headrest & non tilt. Apart from the actual seat frame all other mechanical parts are the same as the high-back type seats introduced in 1969.

Seat Frame;
Mk1 -
Right Hand - (1) - 903332
Left Hand - (1) - 903331
Mk2 & Mk3 -
Right Hand - (1) - 903893
Left Hand - (1) - 903892

Case/Basket (seat/base cushion);
Mk1 -
Metal Case (RH & LH) - (2) - 903509
Mk2 &Mk3 -
Wire Basket (RH & LH) - (2) - 810393

Hook (seat retaining) - (2) - 613435
Setscrew (hook to seat) - (2) - HU505
Washer (spring) - (4) - WL205
Washer (plain) - (4) - WP5
Setscrew - (4) - SH605071
Seat pivot/tilt. Frame to seat slide assembly.
Washer/Spacer - (16) - GHF301
Nut - (4) - GHF222

Seat Slide Assembly;
Right Hand - (1) - 813494
Left Hand - (1) - 813493

Spring (seat catch return);
Right Hand - (1) - 609965
Left Hand - (1) - 609964

Plug (rubber) - (4) - 608297
Seat slide to seat frame.
Setscrew (seat slide to floor) - (8) - GHF117
Washer (plain) - (8) - GHF300
Washer (plain) - (4) - WP48
Washers WP48 must be used when carpets fitted.

The following parts are not illustrated

Trim Retaining Clips;
Edge Clip - (50) - 619822
'C' Clip - (8) - 610520
Hog Ring ('D' clip) - (20) - 561785
Note: Hog rings are included in our replacement seat cover kits.

Low-Back Seats & Fittings (Mk3 USA 1968)

---

Original Seat Frame Specification & Fitment
Mk3;
USA models 1968 only.
Reclining, non-headrest, non tilt seat.
Low-back tubular frame with rubber straps across back (squab).
Seat cushion (base) fitted on to a shallow wire basket.

Special Note: USA Mk3 Models
For 1968, USA spec Mk3s were fitted with a low-back seat with a tubular frame that used rubber straps across the back. The seats were reclining, non-headrest & non tilt. Apart from the actual seat frame all other mechanical parts are the same as the high-back type seats introduced in 1969.

Seat Strap Kit;
Cushion (seat base) - (2) - RG1202
Squab (seat back) - (2) - RG1237

Seat Frame;
Right Hand - (1) - 910425
Left Hand - (1) - 910424

Low-Back Seats & Fittings (MkIV 1970 - 1973)

---

Original Seat Specification & Fitment
MkIV;
UK & European Markets Only.
Non-reclining, non-headrest, seat tilts.
Low-back tubular frame with rubber straps across back (squab).
Seat cushion (base) fitted on to a shallow wire basket.

Seat Strap Kit (squab) - (2) - RL1557

Seat Frame;
Right Hand - (1) - 913712
Left Hand - (1) - 913711

Basket (seat/base cushion);
Right Hand - (1) - 911274
Left Hand - (1) - 911273

Safety/Release Catch (seat tilt);
Right Hand - (1) - 724025
Left Hand - (1) - 724024

Knob (release catch) - (2) - 621458
Clip/Ferrule (release catch) - (2) - 621776
Spring (release catch) - (2) - 624618
Screw (chrome) - (4) - PMP308
Washer - (4) - WL205
Striker Plate (safety catch) - (2) - 630801
Buffer - (2) - 624828
Locating Peg - (2) - 630803
Setscrew - (4) - 257020A
Washer (spring) - (6) - WL205
Washer (plain) - (6) - WP124
Nut - (2) - HN2005
Setscrew - (4) - SH605071
Seat pivot/tilt. Frame to seat slide assembly.
Washer/Spacer - (16) - GHF301
Nut - (4) - GHF222

Seat Slide Assembly;
Right Hand - (1) - 820536
Left Hand - (1) - 820535

Spring (seat catch plate) - (2) - 626373
Setscrew (seat slide to floor) - (8) - SH604071
Washer (plain) - (8) - GHF300
For setscrew SH604071.
washer (plain) - (4) - WP48
For setscrew SH604071.

Trim Retaining Clips;
Edge Clip - (12) - 608817
'C' Clip - (8) - 610520
'C' Clip - (4) - 608862
Hog Ring - (ar) - 561785

Low-Back Seats & Fittings (MkIV 1973 - 1975 & 1500)

---

Original Seat Specification & Fitment
MkIV & 1500;
All Markets (worldwide).
Reclining, removable headrests, seat tilts.
Low-back tubular frame with rubber straps across back (squab).
Seat cushion (base) fitted on to a shallow wire basket.

Seat Strap Kit (squab) - (2) - RG1236

Seat Frame;
Right Hand - (1) - 916402
Left Hand - (1) - 916401

Basket (seat/base cushion);
Right Hand - (1) - 911274
Left Hand - (1) - 911273

Seat Belt Sensor - (2) - UKC6338
Clip (cable retaining) - (2) - 615837

Safety/Release Catch (seat tilt);
Right Hand - (1) - 716144
Left Hand - (1) - 716143

Knob (release catch) - (2) - 621458
Clip/Ferrule (release catch) - (2) - 621776
Spring (release catch) - (2) - 624618
Screw (chrome) - (4) - PMP308
Washer - (4) - WL205
Lever/Handle (seat recline) - (2) - 717105
Screw (chrome) - (2) - PMP308
Washer - (2) - WP5
Setscrew - (4) - SH605071
Seat pivot/tilt. Frame to seat slide assembly.
Washer/Spacer - (16) - GHF301
For setscrew SH605071.
Nut (for setscrew SH605071) - (4) - GHF222

Seat Slide Assembly;
Right Hand - (1) - 820536
Left Hand - (1) - 820535

Spring (seat catch return) - (2) - 626373
Setscrew (seat slide to floor) - (8) - SH604071
Washer (plain) - (8) - GHF300
For setscrew SH605071.
Washer (plain) - (4) - WP48
For setscrew SH605071.

Trim Retaining Clips;
Edge Clip - (12) - 608817
'C' Clip - (8) - 610520
'C' Clip - (4) - BD21962
Hog Ring - (ar) - 561785

The following parts are not illustrated
Refer to MkIV (1970 - 1973) for parts illustration.
Striker Plate (safety catch) - (2) - 630801
Buffer - (2) - 624828
Locating Peg - (2) - 630803
Setscrew - (4) - 257020A
Washer (spring) - (6) - WL205
Washer (plain) - (6) - WP124
Nut - (2) - HN2005

Headrest Stalk Fittings

Spring Friction Roller;
Rollers are not interchangeable.
Metal Type (early models) - (2) - CZA4713
Nylon Type (late models) - (2) - ZKC1271

Washer (oval) - (2) - CZA4263
Finisher (oval) - (2) - CZA4500
Blanking Plug (black) - (2) - BD36610
Used when headrest not fitted.

High-Back Seats & Fittings (Mk3 - USA 1969 - 1970)

---

Original Seat Specification & Fitment
Mk3;
USA Markets only 1969 to 1970.
Reclining, built-in headrests, non tilt seat.
High-back tubular frame with rubber straps across back (squab).
Seat cushion (base) fitted on to a rubber diaphragm.

Special Note: USA Mk3 Models
For 1968, USA spec Mk3s were fitted with a low-back seat with a tubular frame that used rubber straps across the back. The seats were reclining, non-headrest & non tilt. Apart from the actual seat frame all other mechanical parts are the same as the high-back type seats introduced in 1969.

Seat Strap Kit;
Cushion (seat base) - (2) - RG1202
Squab (seat back) - (2) - RG1237

Seat Frame;
Right Hand - (1) - 910425
Left Hand - (1) - 910424

Lever/Handle (seat recline) - (2) - 717105
Screw (chrome) - (2) - PMP308
Washer - (2) - WP5
Setscrew (frame to seat slide - rear) - (4) - BH605111
Spacer (for setscrew BH605111) - (4) - 622224
Nut (for setscrew BH605111) - (4) - GHF201
Setscrew (frame to seat slide - front) - (4) - SH605071
Washer/Spacer - (16) - GHF301
For setscrew SH605071.
Nut (for setscrew SH605071) - (4) - GHF222

Seat Slide Assembly;
Right Hand - (1) - 813679
Left Hand - (1) - 813678

Spring (seat catch return) - (2) - 623200
Setscrew (seat slide to floor) - (8) - GHF117
Washer (plain) - (8) - GHF300
For setscrew GHF117.
Washer (plain) - (4) - WP48
For setscrew GHF117.
Washers WP48 must be used when carpets fitted.

Trim Retaining Clips;
Clip - (4) - 608817
Hog Ring - (ar) - 561785
'C' Clip - (4) - 610520
Clip - (20) - 603811
Clip - (4) - 608511
Clip - (12) - 613769
Clip - (4) - 613770

High-Back Seats & Fittings (MkIV USA 1970 - 1973)

---

Original Seat Specification & Fitment
MkIV;
USA Markets 1970 - 1973 only.
High-back tubular frame with rubber straps across back (squab).
Seat cushion (base) fitted on to a shallow wire basket. Reclining, built-in headrests, seat tilts.

Note: USA MkIV models from 1973 used low-back type seats.
For USA markets after 1973 to 1975 refer to Low-Back Seats 'MkIV (1973 to 1975)' & 1500.

Seat Strap Kit (squab) - (2) - RG1236

Seat Frame;
Right Hand - (1) - 715394
Left Hand - (1) - 715393

Basket (seat/base cushion);
Right Hand - (1) - 911274
Left Hand - (1) - 911273

Seat Belt Sensor - (2) - UKC6338
Clip (cable retaining) - (2) - 615837

Safety/Release Catch (seat tilt);
Right Hand - (1) - 716144
Left Hand - (1) - 716143

Knob (release catch) - (2) - 621458
Clip/Ferrule (release catch) - (2) - 621776
Spring (release catch) - (2) - 624618
Screw (chrome) - (4) - PMP308
Washer - (4) - WL205
Lever/Handle (seat recline) - (2) - 717105
Screw (chrome) - (2) - PMP308
Washer - (2) - WP5
Setscrew - (4) - SH605071
Seat pivot/tilt. Frame to seat slide assembly.
Washer/Spacer - (16) - GHF301
For setscrew SH605071.
Nut (for setscrew SH605071) - (4) - GHF222

Seat Slide Assembly;
Right Hand - (1) - 820536
Left Hand - (1) - 820535

Spring (seat catch return) - (2) - 626373
Setscrew (seat slide to floor) - (8) - SH604071
Washer (plain) - (8) - GHF300
For setscrew SH605071.
Washer (plain) - (4) - WP48
For setscrew SH605071.

Trim Retaining Clips;
Edge Clip - (12) - 608817
'C' Clip - (8) - 610520
'C' Clip - (4) - BD21962
Hog Ring - (ar) - 561785

The following parts are not illustrated
Striker Plate (safety catch) - (2) - 630801
Buffer - (2) - 624828
Locating Peg - (2) - 630803
Setscrew - (4) - 257020A
Washer (spring) - (6) - WL205
Washer (plain) - (6) - WP124
Nut - (2) - HN2005

Mk1 & Mk2 Seat Cover Kits

---

Mk1
Seat cover kits are sold in vehicle sets only.
They include 2 cushions (base) & 2 squabs (back).
Seat foams not included.
UK - European & USA Models
(1962 to 1964)
Original Seat & Trim Spec -
Low-back, non-reclining, non-headrest, seat tilts.
Vinyl trim with plain flutes in 'Stag' material.
Replacement Trim Kit Spec -
Vinyl & leather kits with pain flutes.
Vinyl trim is in 'Stag' material.

Vinyl Seat Cover Kit;
Black - (1) - RL1566BLACK
Blue - (1) - RL1566BLUE
Red - (1) - RL1566RED
Beige - (1) - RL1566BEIGE

Leather Seat Cover Kit;
Black - (1) - RL1580BLACK
Blue - (1) - RL1580BLUE
Red - (1) - RL1580RED

Seat Foams;
Squab (seat back, RH & LH) - (2) - RL1462
Cushion (seat base, RH & LH) - (2) - RL1547

Mk2
Seat cover kits are sold in vehicle sets only.
They include 2 cushions (base) & 2 squabs (back).
Seat foams not included.
UK - European & USA Models
(1964 to 1967)
Original Seat & Trim Spec -
Low-back, non-reclining, non-headrest, seat tilts.
Vinyl trim with plain flutes in 'Stag' material.
Replacement Trim Kit Spec -
Vinyl & leather kits with plain flutes.
Vinyl trim is in 'Stag' material.

Vinyl Seat Cover Kit;
Black - (1) - RL1348BLACK
Midnight Blue - (1) - RL1348BLUEMID
Shadow Blue - (1) - RL1348BLUESHAD
Light Tan - (1) - RL1348LIGHTTAN
New Tan - (1) - RL1348NEWTAN
Red - (1) - RL1348RED
Beige - (1) - RL1348BEIGE

Leather Seat Cover Kit;
Black - (1) - RL1550BLACK
Blue - (1) - RL1550BLUE
Red - (1) - RL1550RED

Seat Foams;
Squab (seat back, RH & LH) - (2) - RL1462
Cushion (seat base, RH & LH) - (2) - RL1407

Mk3 Seat Cover Kits

---

Seat cover kits are sold in vehicle sets only.
They include 2 cushions (base) & 2 squabs (back).
Seat foams not included.

UK - European Models
(1967 to 1970)
USA Models
(1967)
Original Seat & Trim Spec -
Low-back, non-reclining, non-headrest, seat tilts.
Vinyl trim with plain flutes in 'Stag' material.
Replacement Trim Kit Spec -
Vinyl & leather kits with plain flutes.
Vinyl trim is in 'Stag' material.

Vinyl Seat Cover Kit;
Black - (1) - RL1348BLACK
Midnight Blue - (1) - RL1348BLUEMID
Shadow Blue - (1) - RL1348BLUESHAD
Light Tan - (1) - RL1348LIGHTTAN
New Tan - (1) - RL1348NEWTAN
Red - (1) - RL1348RED
Beige - (1) - RL1348BEIGE

Leather Seat Cover Kit;
Black - (1) - RL1550BLACK
Blue - (1) - RL1550BLUE
Red - (1) - RL1550RED

Seat Foams;
Squab (seat back, RH & LH) - (2) - RL1462
Cushion (seat base, RH & LH) - (2) - RL1407

USA Models
(1968)
Original Seat & Trim Spec -
Low-back, reclining, non-headrest, non-tilt.
Vinyl trim with plain flutes in 'Stag' material.
Replacement Trim Kit Spec -
Vinyl with plain & perforated flutes, leather kits with plain flutes.
Vinyl is in 'Stag' material.

Vinyl Seat Cover Kits;
Black - (1) - RG1204BLACK
Midnight Blue - (1) - RG1204BLUEMID
Shadow Blue - (1) - RG1204BLUESHAD
Light Tan - (1) - RG1204LTAN
Red - (1) - RG1204RED

Leather Seat Cover Kit;
Black - (1) - RL1589BLACK
Red - (1) - RL1589RED

Seat Foams - (1) - RG1207
Vehicle set, cushion & squab.

Strap Kit;
Squab (seat back, RH & LH) - (2) - RG1237
Cushion (seat base, RH & LH) - (2) - RG1202

USA Models
(1968)
Original Seat & Trim Spec -
High-back, reclining, built-in headrest, non tilt.
Vinyl trim with plain flutes in 'Stag' material.
Replacement Trim Kit Spec -
Vinyl & leather kits with plain flutes.
Vinyl trim is in 'Stag' material.

Vinyl Seat Cover Kit;
Black - (1) - RL1592BLACK
Blue - (1) - RL1592BLUE
Red - (1) - RL1592RED
Tan - (1) - RL1592TAN

Leather Seat Cover Kit;
Black - (1) - RG1216BLACK
Midnight Blue - (1) - RG1216BLUEMID
Red - (1) - RG1216RED

Seat Foams - (1) - RG1217
Vehicle set, cushion & squab.

Strap Kit;
Squab (seat back, RH & LH) - (2) - RG1237
Cushion (seat base, RH & LH) - (2) - RG1202

MkIV Seat Cover Kits

---

Seat cover kits are sold in vehicle sets only.
They include 2 cushions (base) & 2 squabs (back).
Seat foams not included.

UK - European Models
(1970 to 1973)
Original Seat & Trim Spec -
Low-back, non-reclining, non-headrest, seat tilts.
Vinyl trim with plain flutes in 'Stag' material.
Replacement Trim Kit Spec -
Vinyl & leather kits with plain flutes.
Vinyl trim is in 'Stag' material.

Vinyl Seat Cover Kit;
Black - (1) - RL1584BLACK
Red - (1) - RL1584RED
Blue - (1) - RL1584BLUE
Tan - (1) - RL1584TAN

Leather Seat Cover Kit;
Black - (1) - RL1559BLACK
Blue - (1) - RL1559BLUE
Red - (1) - RL1559RED
Tan - (1) - RL1559TAN

Seat Foams;
Squab (seat back, RH) - (1) - 913768
Squab (seat back, LH) - (1) - 913767
Cushion (seat base, RH) - (1) - 912986
Cushion (seat base, LH) - (1) - 912985

Strap Kit - (2) - RL1557
Squab (seat back, RH & LH).

USA Models
(1970 to 1973)
Original Seat & Trim Spec -
High-back, reclining, built-in headrest, seat tilts.
Vinyl trim with perforated flutes & plain flutes in 'Stag' material.
Replacement Trim Kit Spec -
Vinyl with perforated & plain flutes, leather kits with plain flutes.
Vinyl trim is in 'Stag' material.

Vinyl Seat Cover Kit;
Black - (1) - RG1226BLACK
Black (plain flutes) - (1) - RG1226SPITBLACK
Beige - (1) - RG1226BEIGE
Shadow Blue - (1) - RG1226BLUESHAD
Chestnut - (1) - RG1226CHESTNUT
New Tan - (1) - RG1226NTAN
Red - (1) - RG1226RED

Leather Seat Cover Kit;
Black - (1) - RG1228BLACK
New Tan - (1) - RG1228NTAN
Red - (1) - RG1228RED

Seat Foams;
Squab (seat back, RH & LH) - (2) - RG1239
Cushion (seat base, RH) - (1) - 912986
Cushion (seat base, LH) - (1) - 912985

Strap Kit - (2) - RG1236
Squab (seat back, RH & LH).

UK - European & USA Models
(1973 to 1975)
Original Seat & Trim Spec -
Low-back, reclining, removable headrest, seat tilts.
Vinyl trim with plain flutes in '1290' material.
Replacement Trim Kit Spec -
Vinyl & leather kits with plain flutes.
Vinyl trim is in '1290' material.

Vinyl Seat Cover Kit;
Black - (1) - RL1604BLACK
Blue - (1) - RL1604BLUE
Tan - (1) - RL1604TAN
Red - (1) - RL1604RED
Chestnut - (1) - RL1604CHESTNUT
Beige - (1) - RL1604BEIGE

Leather Seat Cover Kit;
Black - (1) - RG1234BLACK
Blue - (1) - RG1234BLUE
Red - (1) - RG1234RED
New Tan - (1) - RG1234NTAN
Beige - (1) - RG1234BEIGE
Biscuit - (1) - RG1234BISCUIT

Seat Foams;
Squab (seat back, RH & LH) - (2) - RL1533
Cushion (seat base, RH) - (1) - 912986
Cushion (seat base, LH) - (1) - 912985

Strap Kit - (2) - RG1236
Squab (seat back, RH & LH).

1500 Seat Cover Kits

---

Seat cover kits are sold in vehicle sets only.
They include 2 cushions (base) & 2 squabs (back).
Seat foams not included.

UK - European & USA Models
(1976 to 1980)
Original Seat & Trim Spec -
Low-back, reclining, removable headrest, seat tilts.
Vehicles to FH100,020 had vinyl trim with plain flutes in '1290' grain material.
Vehicles from FH100,020 had hounds tooth (check) cloth centres with '1290' grain vinyl trim.
Note: From FH113678 all vinyl trim was supplied in the smoother 'Stag' grain material.
Replacement Trim kit Spec -
Vinyl & leather kits with plain flutes. Vinyl with hounds tooth cloth centres.

Vinyl Seat Cover Kit;
Black - Coarse ('1290') Grain - (1) - RL1444BLACKC
Black - Smooth ('Stag') Grain - (1) - RL1444BLACKS
Beige - Coarse ('1290') Grain - (1) - RL1444BEIGEC

Houndstooth Seat Cover Kit;
Black - Coarse ('1290') Grain - (1) - RL1596BLACKC
Black - Smooth ('Stag') Grain - (1) - RL1596BLACKS
Beige - Coarse ('1290') Grain - (1) - RL1596BEIGEC

Leather Seat Cover Kit;
Black - (1) - RL1529BLACK
Biscuit - (1) - RL1529BISCUIT

Seat Foams;
Squab (seat back, RH & LH) - (2) - RL1540
Cushion (seat base, RH) - (1) - 912986
Cushion (seat base, LH) - (1) - 912985

Strap Kit - (2) - RG1236
Squab (seat back, RH & LH).

Headrests & Covers (Detachable Headrests)

---

MkIV (1973 - 1975)

Note: Matador Red is only available in 'Stag' (smooth) grain.

Headrest Assembly;
Headrest assemblies are sold individually.
Black (coarse '1290' grain) - (2) - 917951
Beige (coarse '1290' grain) - (2) - 917954
Shadow Blue (coarse '1290' grain) - (2) - 917957
Chestnut (coarse '1290' grain) - (2) - 917953
Matador Red (smooth 'stag' grain) - (2) - 919072
New Tan (coarse '1290' grain) - (2) -