Moulding & Trim Kits
Chrome moulding kit (Per car) - (1) - RS1463
Kit includes 4 horseshoes, 4 strips and retaining clips.
Sill trim kit - (1) - RS1216
Kit includes 2 over sill trims in 'Mirror' finish stainless steel, 2 retaining strips and rivets.
Sill strip kit - (1) - RS1553
Kit inc 2 sill strips (that run along top of sill) (715939), 4 end caps and retaining clips.
'B' Post protector kit - (1) - RS2023
Kit Includes 2 protectors & 6 screws. These polished stainless steel protectors look great and help to protect your 'B' post trim when removing/replacing hard-top.
Sill finisher/carpet retainer - (2) - 725573
Finishers/carpet retainers fit on doorstep/kick plate area.

Tread/Kick plate (Sill top);
With 'Triumph' logo.
Right hand - (1) - 814011
Left hand - (1) - 814010

Screw (Tread/Kick plate to sill) - (6) - 517535

'B' Post protector strips (All models);
Also listed as kit (RS2033).
Right hand - (1) - 632681
Left hand - (1) - 632671

Screw - (6) - AT606042

Individual Mouldings/Components

Front body mouldings;
Upper strip - (1) - 712411
Lower strip - (1) - 712730
Horseshoe -
Right hand - (1) - 816492
Left hand - (1) - 816491

Retaining clips;
for upper/lower strips - (16) - GHF1150
for horseshoes - (8) - 613869

'BL' blue badge (Front wing) - (2) - 725525
Sill strip (3/4" wide) - (2) - 715939
Runs along top of sill on all Mk1 & Mk2’s to LD400000.

End caps (for Sill strip 715939);
Right hand - (2) - 630885
Left hand - (2) - 630884

Clips (for strip 715939) - (20) - GHF1167

Sill finisher (Late MK2's only from LD40000);
Original aluminium over sill finishers.
Right hand - (1) - 819876
Left hand - (1) - 819875

Retaining strip (Late MK2's only);
Original aluminium.
Use only with over sill finishers 819876/819875.
Right hand - (1) - 630223
Left hand - (1) - 630222

Rivet (Finisher & retainer strip) - (22) - 713531

'B' Post pillar capping;
Right hand - (1) - 811796
Left hand - (1) - 811795

Top cover plate ('B' post capping);
Right hand - (1) - 726471
Left hand - (1) - 726470

Screw (Top cover plate) - (4) - 508051

Beading (Lower 'B' post capping);
Right hand - (1) - 626692
Left hand - (1) - 626691

Locking plate (Chrome);
For factory hard-top, located behind 'B' post pillar.
Right hand - (1) - 812972
Left hand - (1) - 812971

Washer - plain - (4) - GHF300
Washer - spring - (4) - GHF331
Nut - (4) - GHF200
'Pop' rivet - (8) - 713531

Rear body mouldings;
Upper strip (Boot lid) - (1) - 712414
Lower strip - (1) - 712415
Horseshoe -
Right hand - (1) - 816490
Left hand - (1) - 816489

Retaining clips;
for upper/lower strips - (16) - GHF1150
for horseshoes - (8) - 613869

Air intake grille (Bonnet) - (1) - 908388
Screw (self tapping) - (3) - 517531
Washer - (3) - WC106041
Spire clip - (3) - FJ2445
Windscreen capping - (1) - 811776
Setscrew (Capping to frame) - (9) - 518368

Catch (Hood closure);
Right hand - (1) - 622240
Left hand - (1) - 622239

Screw (Closure catch) - (4) - ZKC36

Body Transfers/Decals & Rear Wing Badge

Badge Assembly (Rear wing);
Includes holder & badge insert.
NOTE: Leaping stag faces forwards.
MK1 (Grey) -
Right hand - (1) - 718019
Left hand - (1) - 718018
MK2 (Black) -
Right hand - (1) - 725761
Left hand - (1) - 725760

Badge Insert only;
MK1 (Grey) -
Right hand - (1) - 718019B
Left hand - (1) - 718018B
MK2 (Black) -
Right hand - (1) - 725761B
Left hand - (1) - 725760B

Holder only - (2) - 725761H
Gasket - (2) - 150652
Retainer - (4) - 152013
Washer - (4) - WL205
Nut - (4) - HN2005

Stag Badge Kits

Badge kit (Per car);
MK1 models - (1) - RS2021
Kit includes: 1 front bumper plinth Triumph badge & retainers, 1 front grille badge insert (Grey), 2 front BL wing badges (Blue), 2 Rear wing badge inserts (Grey), 1 rear number plate lamp Triumph badge & retainers.
MK2 models - (1) - RS2022
Kit includes: 1 front bumper plinth Triumph badge & retainers, 1 front grille badge insert (Black), 2 front BL wing badges (Blue), 2 Rear wing badge inserts (Black), 1 rear bumper plinth and badge.

Body stripe kit;
Kit includes 1 full roll (cut to suit) which is sufficient for both front wings, door & rear wings.
Black - (1) - RS1218
Gold - (1) - RS1219
Silver - (1) - RS1220

Information Label kits;
Engine bay only - (1) - RS1515
Includes the following self adhesive labels; E11/E2, Firing order, Air cleaner & Tyre pressures.
Vehicle set - (1) - RS1464
Includes the following self adhesive labels; Chassis/commission plate, Hood stowage instructions, Hood stowage 'Warning', E11/E2, Firing order, Air cleaner & Tyre pressures.

Individual lables;
E11/E2 label - (1) - RS1406
Firing order label - (1) - RS1405
Air cleaner label - (1) - RS1404
Hood stowage instructions - (1) - RS1439
Located on drivers sunvisor.
Hood stowage 'Warning' - (2) - RS1516
Located in stowage compartment.
Tyre pressure label - (1) - RS1506
Commission plate - (1) - RS1407

Front Bumper & Fittings

---

Front bumper kit - (1) - RS1622
Front bumper blade - (1) - 907875
Fitting kit (Front bumper) - (1) - RS1520
Includes all necessary bolts, nuts, washers & brackets to assemble & fit front bumper, plus rubber seals for plinth & overiders.
Plinth - Number plate (UK) - (1) - 817251
Less Triumph badge.
'Triumph' badge (Complete) - (1) - 626859
Retaining clip - (3) - FR1202
For badge 626859 to plinth.
'Triumph' badge (Insert) - (1) - 626859STICKER
Self adhesive insert. Use if not replacing complete badge.
Seal (UK plinth to bumper) - (1) - 625665
Plinth - Number plate (USA) - (1) - 819782
Front number plate mounting only.
Bolt (USA plinth to bumper) - (2) - BH606141
Washer - flat - (2) - GHF302

Overider;
Right hand - (1) - 812224
Left hand - (1) - 812223

Bolt (Overider to bumper) - (2) - CB6924
Pan head screw with square shoulders.
Overider rubber - (2) - 713623
Washer (Rubber locating) - (2) - GHF302
Nut (Rubber locating) - (2) - GHF200
Seal (Overider to bumper) - (4) - 608491
Bracket (Corner) - (2) - 614208

Setscrew;
Bracket to bumper - (2) - SH606061
Locates in to captive nut in bumper.
Bumper to front wing - (2) - SH606061

Washer - spring - (4) - GHF333
for setscrew SH606061.
Washer - flat - (4) - GHF302
for setscrew SH606061.
Rubber washer - (2) - GEX7330
for bumper to wing setscrew.
Nut (Use with GEX7330) - (2) - GHF202
Bracket (Main bumper mounting) - (2) - 712760
Nut (Bracket to bumper/overider) - (2) - GHF202
Washer - spring - (2) - GHF333
for nut GHF202 to bolt CB6924.
Washer - flat - (2) - WD110061
for nut GHF202 to bolt CB6924.
Spacer - (2) - 577165
Setscrew (Bracket to chassis) - (4) - GHF105
Washer - flat - (4) - WD110061
for setscrew GHF105.
Washer - spring - (4) - GHF333
for setscrew GHF105.
Nut - (2) - GHF202
for setscrew GHF105.
Setscrew (Bracket to bumper) - (2) - GHF105
Washer - spring - (2) - GHF333
for setscrew GHF105.
Washer - flat - (2) - WD110061
for setscrew GHF105.
Spacer (Plinth to bumper) - (2) - 577165
Nut - (2) - GHF200
Washer - spring - (2) - GHF331
Washer - flat - (2) - GHF300

Rear Bumper & Fittings

---

Bumper Bar & Mountings
MK1 models - (1) - RS1623
MK2 models - (1) - RS1624

Rear bumper;
Centre section -
MK1 models - (1) - 917807
Has 4 holes for number plate lamp (718028).
MK2 models - (1) - 920054
Has 2 holes for plinth (822609).
Corner section -
Right hand - (1) - 917804
Left hand - (1) - 917803

Fitting kit - (1) - RS1521
Includes all necessary bolts, nuts, washers & brackets to assemble & fit rear bumper.

Overider;
Right hand - (1) - 812223
Left hand - (1) - 812224

Bolt (Overider to bumper) - (2) - CB6924
Pan head screw with square shoulders.
Overider rubber - (2) - 713623
Washer (Rubber locating) - (2) - GHF302
Nut (Rubber locating) - (2) - GHF200
Seal (Overider to bumper) - (4) - 608491
Setscrew - (4) - SH605051
Corner section to centre bar.
Washer - spring - (4) - GHF332
for setscrew SH605051.
Washer - flat - (4) - GHF301
for setscrew SH605051.
Nut - (4) - GHF201
for setscrew SH605051.
Bolt (Corner bar to body) - (2) - GHF126
Washer - spring - (2) - GHF333
for bolt GHF126.
Washer - flat - (2) - GHF302
for bolt GHF126.
Rubber washer - (2) - GEX7330
for bumper to wing bolt.
Washer - flat - (2) - WD110061
for bolt GHF126.
Nut - (2) - GHF202
for bolt GHF126.
Bracket (Main bumper mounting) - (2) - 621514
Spacer - (2) - 577165
Washer - flat - (2) - WD110061
to bolt CB6924.
Washer - spring - (2) - GHF33
to bolt CB6924.
Nut (for CB6924) - (2) - GHF200
Bolt (Bracket to body) - (2) - BH606201
Washer - flat - (2) - GHF302
for bolt BH606201.
Washer - spring - (2) - GHF333
for bolt BH606201.
Rubber washer - (2) - GEX7330
for bolt BH606201 to body.
Setscrew (Bracket to bumper) - (2) - GHF105
Washer - spring - (2) - GHF333
for setscrew GHF105.
Washer - flat - (2) - WD110061
for setscrew GHF105.

Badge & Rear Number Plate Lamp

MK1 Models Only
MK1 Number Plate Lamp/Badge firs on Rear Bumper.
Number plate lamp assembly - (1) - 718028
Chrome cover only - (1) - 519582
Screw (Cover to base) - (2) - 518148
'Triumph' badge (Complete) - (1) - 626859
Retaining clip - (3) - FR1202
Washer (Rubber) - (2) - 631594
'Triumph' badge (Insert) - (1) - 626859STICKER
Self adhesive insert, use if not replacing complete badge.
Nut (Lamp unit to bumper) - (2) - HN2005
Washer - spring - (2) - WL205
Washer - plain - (2) - WC106041

Badge & Plinth

MK2 Models Only
Mk2’s were fitted with a Triumph badge/plinth to replace the bumper mounted number plate lamp used on Mk1’s.
Plinth & Badge - (1) - 822609
'Triumph' badge only - (1) - 627564
Self adhesive.
Screw (Plinth to bumper) - (2) - 822610
Washer - plain - (2) - GHF300
Washer - locking - (2) - WL205
Nut - (2) - GHF201

Mirrors

---

Exterior Mirrors

Mirror & arm (Door);
Oval type head -
Right hand - (1) - YKC2960OVAL
Left hand - (1) - YKC2959OVAL
Square type head -
Right hand - (1) - YKC2960SQUARE
Left hand - (1) - YKC2959SQUARE

Mirror head only;
Oval type head - (2) - YKC2961OVAL
Square type head - (2) - YKC2961SQUARE

Mirror arm only;
Right hand - (1) - RS1239
Left hand - (1) - RS1240

Gasket (Arm to body) - (2) - 724199
'Wing' mirror (Chrome) - (1) - RS1570
Universal fitting, RH/LH front wing.
'Bullet' door mirror (Chrome) - (2) - GAM105

Rear View Mirror
Mirror assembly - (1) - 632095
Mirror head only (Dipping) - (1) - 632091
Mirror arm only - (1) - 632095STEM
Clamp bracket - (1) - RTC1006
Mirror arm to windscreen frame.

Screw;
Mirror arm to head - (1) - SG105144
Bracket to screen frame - (2) - SG104161



Return to Stag Index Page

Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form
News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us

©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.

Sun, 18 May 2008