|
|
|
Triumph Stag Suspension - Front |
|
Page Contents
Front Hub - Vertical Link & Tie Rod
Track Control Arm & Drag Strut
Suspension Strut/Leg - Insert & Spring
©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Front Crossmember
Anti-Roll Bar
Front Hub - Vertical Link & Tie Rod
Track Control Arm & Drag Strut
Suspension Strut/Leg - Insert & Spring
Crossmember - (1) - 309156
Bush (Rack mounting);
Standard material - (4) - 119450
Polyurethane material - (4) - 119450POLY
Bracket (Crossmember mounting);
Right hand - (1) - 151441
Left hand - (1) - 151440
Bolt (1.5") - (4) - BH606111
Setscrew (1.5") - (4) - SH606101
Washer - spring - (8) - GHF333
Nut - (8) - GHF223
Anti roll bar - (1) - 216662
Link assembly - (2) - 152143A
Nut - (2) - GHF224
Washer - (2) - WA600071
Bush only (Link);
Standard material - (4) - 517985
Polyurethane material - (4) - 517985POLY
'U' bolt - (2) - 154325
Clamp - (2) - 123502
Bush (Mounting);
Standard material - (2) - 123998
Polyurethane material - (2) - 123998POLY
Spacer - (2) - 154326
Washer - plain - (4) - GHF301
Nut - nyloc - (4) - GHF222
Hub & stub axle kit - (1) - RS1465
Kit is per car. See photo
Kit Includes: 2 new hubs (151081), 2 stub axles (154474), 2 vertical links (209344), 2 tie rods (215210 & 215211) and 2 front hub bearing kits (GHK1016).
Hub grease cap - (2) - 59177
Nut (Stub axle) - (2) - LN2211
Split pin - (2) - PC20
Washer/spacer - (2) - 132666
Bearing (Hub outer) - (2) - GHB102
Included in hub bearing kit GHK1016.
Hub assembly (Includes wheel studs) - (2) - 151081
Wheel studs (Front only) - (8) - 136860
Wheel stud set (Front & Rear) - (1) - RS2013
Kit includes 8 front & 8 rear wheel studs.
Hub bearing kit (Front) - (2) - GHK1016
2 kits required per car.
Includes 2 bearings (GHB101/GHB102) & 1 seal (GHS132).
Bearing (Hub inner) - (2) - GHB101
Included in hub bearing kit GHK1016.
Seal (Hub) - (2) - GHS132
Included in hub bearing kit GHK1016.
Shield - (2) - 133539
Stub axle - (2) - 154474
Vertical link - (2) - 209344
Tie rod lever (Steering);
Right hand - (1) - 215210
Left hand - (1) - 215211
Nut (Locking) - (2) - GHF275
Stub axle locating.
Bolt - (2) - 159514
Washer - spring - (2) - WL600071
Track control arm - (2) - 513941
Bush (Track control arm);
Standard material - (2) - 138885
Polyurethane material - (2) - 138885POLY
Ball joint - (2) - GSJ130
Includes rubber boot (UKC3466) & nut (LN2211).
Nut (Castle headed) - (2) - LN2211
Split pin - (2) - PC20
Washer - (2) - WC112081
Boot - (2) - UKC3466
Circlip - (2) - 133634
Bolt - (2) - BH608221
Nut (Locking) - (2) - GHF275
Drag strut;
Right hand - (1) - TKC2863
Left hand - (1) - TKC2864
Bolt - (2) - BH607201
Washer - spring - (2) - WL600071
Nut - (2) - GHF224
Bump stop - (2) - 156453
Washer/spacer - (2) - 134556
Bush (Drag strut);
Standard material - (4) - 138143
Polyurethane material - (4) - 138143POLY
Washer/spacer - (2) - 134557
Nut - nyloc - (2) - GHF275
Front strut/leg overhaul kit (Per car);
This is the cost effective way to overhaul those tired units.
NOTE: Kits are supplied with standard material insulators.
One overhaul kit contains all the following parts: 2 road springs (215158), 2 inserts (as required), 2 lower insulators (157136), 2 upper insulators (139160), 2 gaiters (138748), 2 mountings (138876), 2 seat pans (133546), 2 sleeves (138599), 2 bearings (138598), 4 thrust washers (138600), 2 washers (138601), 2 washers (138906), 2 castle nuts (LN2213) & 2 split pins (PC13).
with Standard inserts - (1pr) - RS2009
with Spax inserts - (1pr) - RS2009SPAX
with Koni inserts - (1pr) - RS2009KONI
Road spring - (2) - 215158
Spring compressor tool - (1) - RX1328
Insert (Front strut);
Standard (Single) - (2) - GDA3040
Spax (Single) - (2) - GDA3040SPAX
Koni (Pair) * - (1pr) - GDA3040KONI
* Off car adjustable units. Only available as a pair.
Insulator pad (Spring);
Standard material - (2) - 157136
Polyurethane material - (2) - 157136POLY
Strut/lower leg - (2) - GSA5026E
Reconditioned exchange unit, includes standard insert.
Bolt - (4) - 138513
Washer - plain - (4) - GHF333
Spacer - (4) - 133572
Shim;
0.004 - (ar) - 140687
0.010 - (ar) - 140686
Gaiter & Tie Kit - (1) - RS1699
Per vehicle, includes 2 gaiters 138747 & 4 ties BMK1900.
Gaiter - (2) - 138748
Tie (Gaiter) - (4) - BMK1900
Insulator pad (Spring);
Standard material - (2) - 139160
Polyurethane material - (2) - 139160POLY
Washer - (2) - 137334
Pan (Spring seat) - (2) - 133546
Washer (Lower) - (2) - 138601
Thrust washer - (2) - 138600
Mounting rubber (Top) - (2) - 138876
Washer - plain (Mounting rubber) - (6) - WP101
Nut - nyloc (Mounting rubber) - (6) - GHF272
Sleeve - (2) - 138599
Bearing - (2) - 138598
Thrust washer - (2) - 138600
Washer (Upper) - (2) - 138906
Nut (Castle headed) - (2) - LN2213
Split pin - (2) - PC13
Grommet/cover - (2) - 138760
Return to Stag Index Page 
Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.