|
|
|
Triumph TR4/4A/5/250 Suspension |
|
Page Contents
Front Suspension Components - TR4
Front Suspension Components - TR4A/5/250
Rear Springs & Suspension Components
TR4 Leaf Type TR4A/5/250 Coil Type TR4A/5/250 Suspension Packages - not TR4 ©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Anti Roll Bar
Front Suspension Components - TR4
Front Suspension Components - TR4A/5/250
Front Hub & Stub Axle
Front Shock Absorbers
Front Springs
Rear Shock Absorbers
Rear Springs & Suspension Components
Suspension Packages
TR4 Anti Roll Bar Kit - (1) - 510584
Factory option type.
Anti Roll Bar only;
TR4 - (1) - 208571
TR4A/5/250 * - (1) - 215647
TR4A/5/250 (uprated) * - (1) - 215647UR
Fitting Kit for uprated bar - (1) - 215647URFK
* TR6 equipment which is a recognised fitment. See below.
Side Link Assembly;
TR4 - (2) - 121797
TR4A/5/250 - (2) - 152143A
Bush - side link rubber only;
TR4A/5/250
Standard - (4) - 517985
Polyurethane - (4) - 517985POLY
Bush - anti roll bar mounting;
TR4 - (2) - 121791
TR4A/5/250
Standard - (4) - 123998
Polyurethane - (4) - 123998POLYTR
'U' Bolt - bar retaining;
TR4A/5/250 - (2) - 123694
Bracket - bar clamping;
TR4 (includes 'U' bolt) - (2) - 121792
TR4A/5/250 - (2) - 123502
Nyloc Nut - 'U' bolt;
TR4/4A/5/250 - (4) - GHF222
Parts listed for TR4A/5/250 are as TR6 which is a recognised fitment for earlier IRS
cars provided radiator lower protection shield is drilled to accept 'U' bolt fitment.
Radiator Lower Shield - (1) - 213021
If needed for TR4A.
There are 2 basic front suspension arrangements on the TR4.
Early TR4 Cars: To comm. No. CT6343 (wire wheels) & CT6390 (steel wheels).
Late TR4 Cars: From comm. No. CT6344 (wire wheels) & CT6391 (steel wheels).
Top Ball Joint;
Early TR4 - (2) - 200772
Late TR4 - (2) - GSJ131
Vertical Link - (2) - 201803
Fulcrum - upper (inner) - (2) - 200659
Wishbone Bush - upper (inner);
Standard - (8) - 102228
Polyurethane - (4) - 102228POLY
Trunnion - lower;
Early TR4 - (2) - 101557
Late TR4
RH - (1) - 133838
LH - (1) - 133839
Trunnion Fittings;
Trunnion Bush Kit (pre side) - (2) - RF4090
Includes items shown below with *
Seal (trunnion top) * - (2) - 142402
Bush (wishbone arm) * - (4) - 101615
Thrust Washer (inner/outer) * - (8) - 101533
Seal/Washer (to CT7218) * - (8) - 115702
Seal/Washer (CT7219 on) *
Outer - (4) - 115702
Inner - (4) - 134319
Locknut
Castle Head Type - (4) - LN2210
Nyloc Type * - (4) - GHF274
Lower Inner Wishbone Fittings;
Inner Wishbone Overhaul Kit (per side) - (2) - RF4091
Includes items shown below with +
Steel Bush + - (4) - 110695
Nylon Bush + - (4) - 110696
Outer Washer - nylon + - (8) - 110697
Inner/Outer Seal + - (8) - 115702
Nut - nyloc + - (4) - GHF274
Top Ball Joint (inc boot) - (2) - GSJ131
Dust Boot only - (2) - UKC3466
Vertical Link;
RH - (1) - 307215
LH - (1) - 307216
Fulcrum - upper (inner) - (2) - 200659
Wishbone - upper (inner);
Standard - (8) - 102228
Polyurethane - (4) - 102228POLY
Trunnion - lower;
RH - (1) - 142377
LH - (1) - 142378
Trunnion Fittings;
Trunnion Bush Kit (per side) - (2) - RR1094
Includes items shown below with +
Seal (trunnion top) - (2) - 142402
Spacer + - (4) - 139832
Nylon Bearing + - (8) - 139833
Water Shield + - (8) - 139834
Sealing Ring + - (8) - 142387
Bolt - pivot - (2) - 139835
Washer (flat) for above assembly - (8) - 142388
Castle Nut - (2) - LN2212
Split Pin for above - (2) - PC12
Lower Inner Wishbone Fittings;
Inner Wishbone Overhaul Kit (per side) - (2) - RF4092
Includes items shown below with *
Bush *
Standard - (4) - 141481
Polyurethane - (4) - 141481POLY
Bolt * - (4) - HB1121
Nut * - (4) - GHF275
Bracket - inner fulcrum - (4) - 148691
Shim - adjusting - (ar) - 139727
Hub - front assembly (steel wheel) - (2) - 114284
NB. Replace studs for wire wheels.
Stud - for road wheel;
Steel Wheel - (8) - 114282
Wire Wheel - (8) - 114281
Stub Axle Shaft - (2) - 115763
Nut Nyloc (for stub axle);
Inner - (2) - GHF275
Outer - (2) - LN2211
Split Pin - (2) - PC20
Front Hub Bearing Kit - (2) - GHK1021
Bearing - front hub outer - (2) - GHB110
Bearing - front hub inner - (2) - GHB111
Seal - front hub - (2) - GHS110
Cap - front hub grease - (2) - 102689
TR4 Front Shock Absorber (inc bushes);
Standard (supplied in singles) - (2) - RF4038
Spax Adjustable (supplied in pairs) - (1) - RF4038SPAX
Koni Adjustable (supplied in pairs) - (1) - RF4038KONI
Gaz Adjustable (supplied in pairs) - (1) - RF4038GAZ
TR4A/5/250 Front Shock Absorber (inc bushes);
Standard (supplied in singles) - (2) - GSA272
Spax Adjustable (supplied in pairs) - (1) - GSA272SPAX
Koni Adjustable (supplied in pairs) - (1) - GSA272KONI
Gaz Adjustable (supplied in pairs) - (1) - GSA272GAZ
Bush Only - shock absorber;
Top (all models)
Standard - (4) - 152588
Polyurethane - (4) - 152588POLY
Bottom
TR4
Standard - (4) - 102987
Polyurethane - (4) - 102987POLY
TR4A/5/250
Standard - (2) - 119450
Polyurethane - (2) - 119450POLY
Bolt - lower shock absorber;
TR4 - (2) - SH607081
TR4A/5/250 - (2) - BH607201
Lock Nut for above - (2) - GHF275
Bump Stop Rubber (TR4);
Screw-In Type - (2) - 106845
Bracket Type - (2) - 100175
Front Road Spring;
TR4 (for use without spacer) - (2) - 210903
TR4A/5/250
Standard - (2) - 213165
Uprated - (2) - 213165UR
Spring Insulator
Standard - (4) - 100751
Polyurethane - (4) - 100751POLY
Rear Shock Absorber (lever type);
TR4
New
RH - (1) - 202388
LH - (1) - 202389
Reconditioned
RH - (1) - 202388R
LH - (1) - 202389R
TR4A/5/250
New
RH - (1) - GSA286
LH - (1) - GSA287
Reconditioned
RH - (1) - GSA286R
LH - (1) - GSA287R
Rear Shock Absorber (telescopic conversion);
Includes 2 uprated/adjustable telescopic shock absorbers and body mounted brackets.
TR4A/5/250 - not TR4
Gaz - (1) - GSA286-7GAZ
Spax - (1) - GSA286-7SPAX
Koni - (1) - GSA286-7KONI
Link Rod/Joint Assembly for lever (inc bushes);
TR4 - (2) - 105925
TR4A/5/250 - (2) - GZS806
Bush only - for link rod;
Standard - (4) - 152588
Polyurethane - (4) - 152588POLY
Shock Absorber Fluid (16fl.oz) - (1) - AAA149M
Road Spring TR4 (std);
To Comm. No. CT23382 - (2) - 208636
From Comm. No. CT23383 - (2) - 209964
Later springs have deeper curve and are not interchangeable.
Rear Axle Check Strap;
To Comm. No. CT23382 - (2) - 107476
From Comm. No. CT23383 - (2) - 137338
Bush - spring eye;
Front (spring eye) - (2) - 107769
Rear (shackle pin)
Standard - (8) - 112503
Polyurethane - (8) - 112503POLY
Shackle Pin - spring front - (2) - 106231
Nut - shackle pin, spring front - (2) - LN2211
Shackle Pin - spring rear plate - (2) - 107535
Plate - shackle plain - (2) - AHH5019
Nut - shackle retainer - (4) - GHF202
'U' Bolt - spring to axle;
To Comm. No. CT23382 - (4) - 113194
From Comm. No. CT23383 - (4) - 136865
Nyloc Nut - 'U' bolt to plate - (8) - GHF223
Road Spring;
Standard - (2) - 216275
Uprated - (2) - 216275UR
Spring Insulator;
Standard - (4) - 138823
Polyurethane - (4) - 138823POLY
Trailing Arm Assembly;
RH - (1) - 308268
LH - (1) - 308267
Bump Stop - trailing arm;
TR4A - (2) - 136758
TR5/250 - (4) - 136758
Bump Stop (on wheel arch) - TR4A - (2) - 140290
Stud (trailing arm to brake backplate) - (12) - TD812
Spring Washer - (12) - GHF301
Trailing arm to brake backplate.
Nut (washer arm to brake backplate) - (12) - GHF272
Trailing Arm Bush;
Standard - (4) - 137599
Uprated (hard) - (4) - 137599HARD
Polyurethane - (4) - 137599POLY
Mounting Bracket (trailing arm);
Outer (1 notch) - (2) - 141399
Inner (2 notch) - (2) - 141398
Bolt (trailing arm to bracket) - (4) - BH607321
Nut (trailing arm to bracket) - (4) - GHF274
Bolt (mounting bracket to chassis) - (8) - BH606261
Nut (mounting bracket to chassis) - (8) - GHF223
Shim (mounting bracket to chassis) - (ar) - 139363
We have assembled a selection of shock absorber and spring packages to suit your requirements - they save you money too.
These range from standard front and rear (lever) shock absorbers to either Gaz, Spax or Koni with body mounted (Type 1) rear telescopic conversion brackets (mount to inner wheel arch). These are then offered with either standard springs (front 330 lb., rear 360 lb.) or uprated (front 420 lb., rear 420 lb.) and lowered springs (front by 1", rear by 3/4").
Standard Specification Shock Absorbers: Front - Telescopic, Rear - Lever (recon, exchange).
Gaz Adjustable Shock Absorbers: Front - Telescopic, Rear - Telescopic, Type 1 Brackets
Spax Adjustable Shock Absorbers: Front - Telescopic, Rear - Telescopic, Type 1 Brackets
Koni Adjustable Shock Absorbers: Front - Telescopic, Rear - Telescopic, Type 1 Brackets
Kit 1
2 Front, 2 Rear Shock Absorbers
Standard - (1) - RR1405
Gaz - (1) - RR1300GAZ
Spax - (1) - RR1300
Koni - (1) - RR1406
Kit 2
4 Shock Absorbers, 4 Standard Springs, 8 Spring Insulators
Standard - (1) - RR1407
Gaz - (1) - RR1408GAZ
Spax - (1) - RR1408
Koni - (1) - RR1409
Kit 3
4 Shock Absorbers, 4 Uprated/Lowered Springs, 8 Spring Insulators
Standard - (1) - RR1410
Gaz - (1) - RR1411GAZ
Spax - (1) - RR1411
Koni - (1) - RR1412
Standard Spring Set - (1) - RR1413
2 front springs, 2 rear springs, 8 spring insulators.
Uprated/Lowered Spring Set - (1) - RR1414
2 front springs, 2 rear springs, 8 spring insulators.
Suspension Bush Kits;
Includes bushes for wishbones, anti roll bar, front dampers,
steering rack, trailing arms, axle mountings (front) & rear damper links.
Standard - (1) - RR1420
Polyurethane - (1) - RR1420POLY
Suspension Bolt Kit - (1) - RR1420FK
Car set. Includes all necessary bolts, nuts and washers to install the bush kits listed.
NB. excludes special washers which are assumed to be re-used.
Return to TR4 / TR5 Index Page 
Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.