Triumph TR6 Body Fittings - Bonnet & Boot

Page Contents

Bonnet & Safety Catch
Catch Plate, Cable & Prop Rod
Sealing Rubbers, Buffer & Hinges
Boot Lid, Seal & Hinges
Boot Stay, Lock & Striker
Spare Wheel Mounting & Tool Stowage Strap
Matching Lock Sets

Bonnet & Safety Catch

1. Bonnet Assembly - (1) - 908406
2. Safety Catch Assembly - (1) - 619580
3. Screw (fastener to bonnet) - (2) - HU705P
4. Washer (locking) - (2) - WL207
5. Washer (plain) - (2) - WP127

Catch Plate, Cable & Prop Rod

---

6. Catch Plate Assembly - (1) - 710592
7. Screw (cable clamping) - (1) - HU504
8. Washer (plain) - (1) - WP5
9. Nut - (1) - HN2005
10. Screw (catch plate) - (4) - HU706P
11. Washer (locking) - (4) - WL207
12. Washer (plain) - (4) - WP7

Bonnet cables fitted to TR6 cars have no reason to break if they are regularly inspected and lubricated. If the cable does break some serious 'fiddling' will need to be done to release the mechanism. Be aware that bending up the corner of the bonnet and trying to pull the catch with a bent wire coat hanger is not only expensive on bonnets but likely to cause an electrical fire if the battery terminals get shorted out. If in doubt about the quality or operation of your bonnet release cable get it fixed, or rig up a piece of string to use in an emergency.

13. Cable Assembly (bonnet release) - (1) - 630573
14. Cable (inner bonnet release) - (1) - 603468
15. Cable (outer bonnet release) - (1) - 603469
16. Grommet (release cable) - (1) - 61917
17. Clip (bonnet release cable) - (1) - 611768
18. Trunnion (inner cable end) - (1) - 612219
19. Screw (cable clamping in trunnion) - (1) - 564832
20. Clip (bonnet release cable) - (2) - 149059
RH steering.
21. Clip (bonnet release cable) - (2) - 59380
LH steering.
22. Screw (clip to bulkhead) - (2) - YZ3303
23. Rod (stay, bonnet prop) - (1) - 750231
24. Bracket (bonnet stay rod) - (1) - 750229
Welded to RH wheel arch.
25. Buffer (rubber, stay rod anti-rattle) - (1) - 601663
26. Screw (buffer to bracket) - (1) - YA103
27. Nut (nyloc, stay rod to bonnet) - (1) - YN2907
28. Washer (waved) - (1) - 550026
29. Washer (plain) - (1) - WM57

Sealing Rubbers, Buffer & Hinges

---

30. Seal (bonnet, rear) - (1) - 610675
31. Seal (bonnet, front) - (1) - 627075
32. Pin (bonnet locating) - (2) - 612962
33. Nut (jam) - (4) - GHF201
34. Washer (plain) - (4) - WP139
35. Buffer (rubber, bonnet side locating) - (4) - 626152
36. Screw (self locating) - (8) - YA365
37. Washer (cup) - (8) - CD24152
38. Pad (packing, between bonnet and thermostat housing) - (1) - 617034
39. Hinge Assembly (bonnet RH) - (1) - 714833
40. Hinge Assembly (bonnet LH) - (1) - 714832

It is critical that the correct length screws are used to attach the hinges to the bonnet. If screws that are too long are used they will contact the underside of the bonnet's outer skin and cause a 'pimple' to appear on the top surface. If in doubt about whether the screws will foul the bonnet skin, thread them in by finger first, before attempting to install the panel.

41. Fitting Kit (bonnet hinges) - (1) - RR1459
For 2 hinges.
Includes items 42-50 :-
42. Screw (hinge to bonnet) - (6) - SH605071
7/8" long.
43. Screw (hinge side stay to bonnet) - (2) - SH605041
1/2" long.
44. Washer (locking) - (8) - GHF332
45. Washer (plain) - (8) - GHF301
46. Screw (hinge to inner front wing) - (2) - SH605121
1 1/2" long.
47. Screw (hinge to inner front wing) - (2) - GHF103
1 " long.
48. Washer (locking) - (4) - GHF332
49. Washer (locking) - (4) - WM58
50. nut (front wing stay to hinge screw) - (2) - GHF201

Boot Lid, Seal & Hinges

---

51. Boot Lid Assembly - (1) - 813960
52. Seal (boot lid) - (1) - YKC68

53. Hinge Assembly (boot lid RH) - (1) - 715409
Hinge Assembly (boot lid LH) - (1) - 715408

54. Fitting Kit (boot hinges) - (1) - RR1460
For 2 hinges.
Includes items 55-60 :-
55. Screw (hinge to boot lid) - (6) - SH605071
56. Washer (locking) - (6) - GHF332
57. Washer (plain) - (6) - GHF301
58. Screw (hinge to body) - (4) - SH605071
59. Washer (locking) - (4) - GHF332
60. Washer (plain) - (4) - WM58

Boot Stay, Lock & Striker

---

61. Stay (boot lid, sliding unit) - (1) - 612473
62. Bolt (stay to lid & body) - (2) - 612475
63. Washer (plain) - (2) - 511194
64. Washer (plain, stay positioning) - (2) - 501795
65. washer ('thackery', double coil spring) - (2) - 511195
66. Lock Assembly (boot lid) - (1) - 813948
67. Locking Tumbler (with two keys) - (1) - 518102
68. Pin (locking tumbler retaining) - (1) - 518101
69. Screw (push button to mounting plate) - (2) - 518104
70. Washer (locking) - (2) - 518103
71. Rivet (mounting plate to latch) - (2) - 518242
72. Screw (lock assembly to rear valance) - (4) - 509141
73. Washer (locking) - (4) - 505260
74. washer (plain) - (4) - 500223
75. Lock Striker Assembly - (1) - 623270
76. Screw (lock striker to boot lid) - (2) - 510503
77. Washer (locking) - (2) - 505260
78. Washer (plain) - (2) - 500223

Spare Wheel Mounting & Tool Stowage Strap

---

79. Wing Nut (securing spare wheel) - (1) - 650019
80. Disc (securing spare wheel) - (1) - 650016
81. Hook (spare wheel clamp) - (1) - 650017
82. Hook Bolt (spare wheel) - (1) - 650017
83. Nut (plain, top of hook bolt) - (1) - HN2008
84. Plate (reinforcing, spare wheel pan) - (1) - 611875
85. Pad (rubber/canvas, thin) - (3) - 601994
86. Washer (plain) - (1) - WP8
87. Nut (nyloc, bottom of hook bolt) - (1) - YN2908
88. Strap (for tool roll) - (1) - 611760
89. Plate (for tool roll strap) - (1) - 611763
90. Screw - (2) - PT504

Matching Lock Sets

---

91. Matching Lock Set - (1) - RR1392
Includes ignition tumbler, cubby box lock, door lock set & boot lock with matched pair of FS keys.
To commission no. CP/CC50000; 1969.

92. Matching Lock Set - (1) - RR1393
Includes chrome cubby box lock, door lock set & boot lock barrel with matched pair of FS keys.
Commission no. CP/CC50001 to CP/CC75000; 1970 to 1971.
Matching Lock Set - (1) - RR1394
Includes black cubby box lock, door lock set & boot lock barrel with matched pair of FS keys.
From commission no. CP/CC75001; 1972 to 1976.



Return to TR6 Body Fittings & Bumpers Index      Return to TR6 Index Page

Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form
News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us

©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.