CP/CC models 1696 to 1972

1. Front Bumper Assembly - (1) - 908376

2. Bracket (bumper mounting, LH) - (1) - 814459
Bracket (bumper mounting, RH) - (1) - 814460

The later specification bumper mounting brackets can be used to service early models, the difference being that the later items are of a sturdier construction and include tapped holes for reinforcing support tubes that attach to the chassis tubular cross member. This modification was to provide the required strength in the '5 M.P.H.' impact test for the North American markets.

3. Fitting Kit (front bumper) - (1) - RR1466
Kit includes items 14-16 :-
4. Bolt (bracket to chassis, 2 3/4" long) - (2) - HB922
5. Bolt (bracket to chassis, 3" long) - (2) - HB924
6. Washer (plain) - (4) - WM75
7. Washer (locking) - (4) - WL209
8. Nut (plain) - (4) - HN2009
9. Bolt (bumper to bracket) - (2) - GHF105
10. Washer (locking) - (2) - WL209
11. Washer (plain) - (2) - WM75
12. Washer (rubber) - (2) - GEX7330
13. Bolt (bumper to front wing) - (2) - HB808
14. Washer (locking) - (2) - WQ308
15. Washer (plain) - (2) - WP8
16. Washer (rubber) - (2) - GEX7330

European models from CR1; 1972 to 1975.
North American models from CF1 to CF12500; 1972 to 1973.

17. Front Bumper Assembly (new) - (1) - 822530
Front Bumper Assembly (reconditioned) - (1) - 822530R

18. Bracket (bumper mounting, LH) - (1) - 821408
Bracket (bumper mounting, RH) - (1) - 821409

19. Tube (bumper support) - (2) - YKC1743

20. Fitting Kit (front bumper) - (1) - RR1467
Kit includes items 21-40 :-
21. Bolt (bracket to chassis, 2 3/4" long) - (2) - HB922
22. Bolt (bracket to chassis, 3" long) - (2) - HB924
23. Washer (plain) - (4) - WM75
24. Washer (locking) - (4) - WL209
25. Nut (plain) - (4) - HN2009
26. Plate (spacer tube to bracket) - (2) - 632053
27. Screw (tube to bumper bracket) - (2) - HU708
28. Washer (locking) - (2) - WL207
29. Screw (tube to chassis) - (2) - HU910
30. Washer (plain) - (4) - WP9
31. Washer (locking) - (2) - WL210
32. Nut (plain) - (2) - HN2009
33. Bolt (bumper to bracket) - (2) - GHF105
34. Washer (locking) - (2) - WL209
35. washer (plain) - (2) - WM75
36. Washer (rubber) - (2) - GEX7330
37. Screw (bumper to front wing) - (2) - HU708
38. Washer (locking) - (2) - WQ307
39. Washer (plain) - (2) - WM57
40. Washer (rubber) - (2) - GEX7330

To physically ease the task of fitting the front bumper, studs and nuts can be substituted for the bolts that attach the bumper to the front valance. The use of studs was incorporated in the later North American specification cars to ease production assembly of the heavier bumper and over rider unit (it is easier to fit nuts to the studs, having hung the bumper on the studs, than align a bolt in a thread while holding the bumper in position).

41. Stud Kit (bumper mounting) - (1) - RR1468
Kit includes items 42-45 :-
42. Stud (bumper to bracket) - (2) - UKC3134
43. Washer (plain) - (2) - WM75
44. Washer (locking) - (2) - WL209
45. nut (plain) - (2) - HN2009

North American models from CF12501 to CF27000; 1973 to 1974.

46. Front Bumper Assembly - (1) - XKC760

47. Bracket (bumper mounting, LH) - (1) - 821408
Bracket (bumper mounting, RH) - (1) - 821409

48. Tube (bumper support) - (2) - YKC1743

49. Fitting Kit (front bumper) - (1) - RR1469
Kit includes items 50-69 :-
50. Bolt (bracket to chassis, 2 3/4" long) - (2) - HB922
51. Bolt (bracket to chassis, 3" long) - (2) - HB924
52. Washer (pain) - (4) - WM75
53. Washer (locking) - (4) - WL209
54. Nut (plain) - (4) - HN2009
55. Plate (spacer, tube to bracket) - (2) - 632053
56. Screw (tube to bumper bracket) - (4) - HU710
57. Washer (locking) - (4) - WL207
58. Screw (tuber to chassis) - (2) - HU910
59. Washer (plain) - (4) - WP9
60. Washer (locking) - (2) - WL209
61. nut (plain) - (2) - HN2009
62. Stud (bumper to bracket) - (2) - UKC3134
63. Washer (plain) - (2) - WM75
64. Washer (locking) - (2) - WQ309
65. nut (plain) - (2) - HN2009
66. Bolt (bumper to front wing) - (2) - HB708
67. Washer (locking) - (2) - WQ307
68. Washer (plain) - (2) - WM57
69. Washer (rubber) - (2) - GEX7330

70. Over Rider Assembly (LH) - (1) - 824892
Over Rider Assembly (RH) - (1) - 824893

71. Angle Bracket (upper, LH) - (1) - ZKC1147
Angle Bracket (upper, RH) - (1) - ZKC1148

72. Angle Bracket (lower, LH) - (1) - ZKC1155
Angle Bracket (lower, RH) - (1) - ZKC1156

73. Reinforcement Plate - (2) - ZKC1151

74. Fitting Kit (front over-riders) - (1) - RR1470
Kit includes items 75-79 :-
75. Bolt (angle bracket to bumper) - (4) - HB839
76. Washer (locking) - (4) - WL208
77. Nut (plain) - (4) - HN2008
78. Screw (over rider to angle bracket) - (8) - HU705P
79. Washer (locking) - (8) - WL207

North American models from CF27001; 1974 to 1976.

80. Front Bumper Assembly (new) - (1) - XKC1774
Front Bumper Assembly (reconditioned) - (1) - XKC1774R

81. Bracket (bumper mounting, LH) - (1) - 821408
Bracket (bumper mounting, RH) - (1) - 821409


82. Tube (bumper support) - (2) - YKC1743
From CF2700 to CF35000.
Tube (bumper support) - (2) - YKC1743
From CF35001.

83. Strut (reinforcement) - (2) - YKC1670
From CF27000 to CF35000.
Strut (reinforcement) - (2) - YKC1749
From CF35001.

84. Fitting Kit (front bumper) - (1) - RR1471
Kit includes items 85-108 :-
85. Bolt (bracket to chassis, 2 3/4" long) - (2) - HB922
86. Bolt (bracket to chassis, 3" long) - (2) - HB924
87. Washer (plain) - (4) - WM75
88. Washer (locking) - (4) - WL209
89. Nut (plain) - (4) - HN2009
90. Plate (spacer, tube to bracket) - (2) - 632053
91. Screw (tuber to bracket) - (4) - HU710
92. Washer (locking) - (4) - WL207
93. Screw (strut to bumper) - (2) - SH606101
94. Washer (plain) - (4) - WP9
95. Washer (locking) - (2) - WL209
96. Nut (plain) - (2) - HN2009
97. Screw (reinforcement/strut to chassis) - (2) - HU911
98. Washer (plain) - (4) - WP9
99. Washer (locking) - (2) - WL209
100. Nut (plain) - (2) - HN2009
101. Bolt (bumper to bracket) - (2) - HB912
102. Washer (plain) - (2) - WM75
103. Washer (locking) - (2) - WQ309
104. Nut (plain) - (2) - HN2009
105. Bolt (bumper to front wing) - (2) - HB708
106. Washer (locking) - (2) - WQ307
107. Washer (plain) - (2) - WM57
108. Washer (rubber) - (2) - GEX7330


109. Over Rider Assembly (LH) - (1) - 824892
Over Rider Assembly (RH) - (1) - 824893

110. Angle Bracket (upper, LH) - (1) - ZKC1147
Angle Bracket (upper, RH) - (1) - ZKC1148

111. Angel Bracket (lower, LH) - (1) - ZKC1155
Angel Bracket (lower, RH) - (1) - ZKC1156

112. Reinforcement Plate - (2) - ZKC1151

113. Fitting Kit (front over riders) - (1) - RR1470
Kit includes items 114-118 :-
114. Bolt (angle bracket to bumper) - (4) - HB839
115. Washer (locking) - (4) - WL208
116. Nut (plain) - (4) - HN2008
117. Screw (over rider to angle bracket) - (8) - HU705P
118. Washer (locking) - (8) - WL207


119. Bracket (front indicator lamp, LH) - (1) - XKC1807
Bracket (front indicator lamp, RH) - (1) - XKC1808

120. Screw (bracket to bumper) - (4) - PX504
121. Washer (plain) - (4) - WP5
122. Washer (locking) - (4) - WL205
123. Nut (plain) - (4) - HN2005

Number Plate Mountings

European models 1969 to 1975;
North American models to CF27000; 1969 to 1974.

124. Number Plate Mounting Kit - (1) - RR1472
Kit includes items 125-129 :-
125. Bracket (front number plate to bumper) - (2) - 625886
126. Screw (number plate bracket to bumper) - (2) - HU706P
127. Washer (plain) - (2) - WM57
128. Washer (locking) - (2) - GHF331
129. Nut - (2) - GHF200

North American models from CF27001; 1974 to 1976.

130. Plinth (front number plate) - (1) - XKC1748
131. Moulding (plastic) - (2) - 614042
132. Screw (plinth to bumper) - (2) - HU905
133. Washer (locking) - (2) - 502577
134. Strut (supporting number plate plinth) - (2) - ZKC1481
135. Screw (plinth to strut) - (2) - 512393
136. Washer (plain) - (2) - 500172
137. Washer (plain) - (2) - WP8
138. Washer (locking) - (2) - WL208
139. Nut (plain) - (2) - HN2008
140. Bracket (mounting, strut) - (2) - ZKC1473
141. Screw (bracket to protection shield) - (4) - HU806
142. Washer (locking) - (4) - WL208
143. Washer (plain) - (4) - WP8
144. Screw (bracket to protection shield) - (2) - HU808
145. Washer (locking) - (2) - WL208
146. Washer (plain) - (2) - WP8

Rear Bumpers

European models to CR5000; 1969 to 1973
North American models to CF12500; 1969 to 1973.

1. Rear Bumper Centre Assembly - (1) - 910157
Pierced to accept number plate lamp.

2. Rear Bumper Corner Assembly (LH) - (1) - 910158
Rear Bumper Corner Assembly (RH) - (1) - 910159

3. Outrigger (LH bumper corner) - (1) - 714714
Outrigger (RH bumper corner) - (1) - 714715

4. Bracket (bumper mounting, LH) - (1) - 813715
Bracket (bumper mounting, RH) - (1) - 813716

5. Fitting Kit (rear bumper) - (1) - RR1473
Kit includes items 6-28 :-
6. Joint Plate (centre to corners) - (2) - 575443
7. Joint Washer (centre to corners) - (2) - 623824
8. Nut - (6) - 502509
9. Washer (locking) - (6) - 510156
10. Washer (plain) - (6) - 502576
11. Bolt (bracket to chassis, 3 1/4" long) - (2) - HB926
12. Washer (plain) - (4) - WP9
13. Washer (locking) - (2) - WL209
14. Nut (plain) - (2) - HN2009
15. Bolt (bracket to chassis, 1 1/4" long) - (2) - HB910
16. Washer (locking) - (2) - WL209
17. Washer (plain) - (2) - WP9
18. Bolt (bumper to bracket) - (2) - HU908
19. Washer (locking) - (2) - WQ309
20. Washer (plain) - (2) - WP9
21. Washer (rubber) - (2) - GEX7330
22. Screw (outrigger to chassis frame) - (4) - HU905
23. Washer (locking) - (4) - WQ309
24. Washer (plain) - (4) - WM59
25. Screw (bumper corner to rear wing) - (2) - HU906
26. Washer (locking) - (2) - WL209
27. Washer (plain) - (2) - WP9
28. Washer (rubber) - (2) - GEX7330

Early 1969, TR6s used bumper corners threaded for 5/16 UNF mounting hardware (the factory shows the chassis numbers CP26933/CC31776 as being the points when the more usual 3/8 UNF screws were incorporated). This would indicate that the earlier bumper corners were made to a different condition (and thus had different part numbers), but no change to the bumper corners themselves is apparent in any factory literature. However, if your car has smaller diameter fixings, the following four lines are the items to fix the bumper corners to the wings, replacing lines 25-28.

To CP26933/CC31777 (if fitted)

29. Screw (bumper corner bar to rear wing) - (2) - HU806
30. Washer (locking) - (2) - WL208
31. Washer (plain) - (2) - WP8
32. Washer (rubber, bumper to wing side) - (2) - GEX7330

European models from CR5001; 1973 to 1975

33. Rear Bumper Centre Assembly - (1) - 920048

34. Rear Bumper Corner Assembly (LH) - (1) - 910158
Rear Bumper Corner Assembly (RH) - (1) - 910159

35. Outrigger (LH bumper corner) - (1) - 714714
Outrigger (RH bumper corner) - (1) - 714715

36. Bracket (bumper mounting, LH) - (1) - 824596
Bracket (bumper mounting, RH) - (1) - 824597

37. Fitting Kit (rear bumper) - (1) - RR1474
Kit includes items 38-63 :-
38. Joint Plate (centre to corners) - (2) - 575443
39. Joint Washer (centre to corners) - (2) - 623824
40. Nut - (6) - 502509
41. Washer (locking) - (6) - 510156
42. Washer (plain) - (6) - 502576
43. Bolt (bracket to chassis, 4" long) - (2) - HB932
44. Washer (plain) - (2) - WP9
45. Spacer (serrated, bracket to chassis) - (2) - 634728
46. washer (plain) - (2) - WP9
47. Washer (locking) - (4) - WL209
48. Nut (plain) - (2) - HN2009
49. Bolt (bracket to chassis, 1 1/2" long) - (2) - HB912
50. Washer (locking) - (2) - WL209
51. Washer (plain) - (2) - WP9
52. Spacer (round, bracket to chassis) - (2) - 634875
53. Bolt (bumper to bracket) - (2) - HB910
54. Washer (locking) - (2) - WQ309
55. Washer (plain) - (2) - WP9
56. Washer (rubber) - (2) - GEX7330
57. Screw (outrigger to chassis) - (4) - HU905
58. Washer (locking) - (4) - WQ309
59. Washer (plain) - (4) - WM59
60. Screw (bumper corner to rear wing) - (2) - HU906
61. Washer (locking) - (2) - WL209
62. Washer (plain) - (2) - WP9
63. Washer (rubber) - (2) - GEX7330

Alternative Fixing System
Fitting the rear bumper may be simplified by the use of studs and nuts in place of the bolts that attach the bumper through the rear valance (for the same reasons outlined in the paragraph in Front Bumpers). The following components are applicable to both pre- and post CR5000 models; i.e. they will replace items 18-20 or 53-55.

64. Stud Kit (bumper mounting) - (1) - RR1468
Kit includes items 65-68 :-
65. Stud (bumper to bracket) - (2) - UKC3134
66. washer (plain) - (2) - WM75
67. Washer (locking) - (2) - WL209
68. Nut (plain) - (2) - HN2009

North American models from CF12501 to CF27000; 1973 to 1974

69. Rear Bumper Centre Assembly - (1) - WKC2446

70. Rear Bumper Corner Assembly (LH) - (1) - 910158
Rear Bumper Corner Assembly (RH) - (1) - 910159

71. Outrigger (LH bumper corner) - (1) - 714714
Outrigger (RH bumper corner) - (1) - 714715

72. Bracket (bumper mounting, LH) - (1) - 824596
Bracket (bumper mounting, RH) - (1) - 824597

73. Fitting Kit (rear bumper) - (1) - RR1475
Kit includes items 74-99.
74. Joint Plate (centre to corners) - (2) - 575443

75. Joint Washer (centre to corner, LH) - (1) - 634932
Joint Washer (centre to corner, RH) - (1) - 634933

76. Nut - (6) - 502509
77. Washer (locking) - (6) - 510156
78. Washer (plain) - (6) - 502576
79. Bolt (bracket to chassis, 4" long) - (2) - HB932
80. Washer (plain) - (2) - WP9
81. Spacer (serrated, bracket to chassis) - (2) - 634728
82. Washer (plain) - (2) - WP9
83. Washer (locking) - (2) - WL209
84. Nut (plain) - (2) - HN2009
85. Spacer (round) - (2) - 634875
86. Bolt (bumper to bracket, 1 1/2" long) - (2) - HB912
87. Washer (locking) - (2) - WL209
88. Washer (plain) - (2) - WP9
89. Stud (bumper to support brackets) - (2) - 143492
90. Washer (plain) - (2) - WP9
91. Washer (locking) - (2) - WL209
92. Nut (plain) - (2) - HN2009
93. Screw (outrigger to chassis) - (4) - HU905
94. Washer (locking) - (4) - WQ309
95. Washer (plain) - (4) - WM59
96. Screw (bumper to rear wing) - (2) - HU906
97. Washer (locking) - (2) - WL209
98. Washer (plain) - (2) - WP9
99. Washer (rubber) - (2) - GEX7330

100. Over Rider Assembly (LH) - (1) - 824896
Over Rider Assembly (RH) - (1) - 824897

101. Support (over rider, LH) - (1) - 730392
Support (over rider, RH) - (1) - 730393

102. Stay (over rider support, LH) - (1) - 824890
Stay (over rider support, RH) - (1) - 824891

103. Fitting Kit (rear over riders) - (1) - RR1476
Kit includes items 104-109 :-
104. Screw (support and stay to over rider) - (8) - HU707P
105. Washer (locking) - (8) - WL207
106. Washer (plain) - (8) - WP7
107. Screw (support stay to chassis) - (2) - HU811
108. Washer (locking) - (2) - WL208
109. Washer (plain) - (2) - WM808

North American models from CF27001; 1974 to 1976.

110. Rear Bumper Centre Assembly - (1) - WKC2445

111. Rear Bumper Corner Assembly (LH) - (1) - WKC2443
Rear Bumper Corner Assembly (RH) - (1) - WKC2444

112. Outrigger (LH bumper corner) - (1) - 714714
Outrigger (RH bumper corner) - (1) - 714715

113. Bracket (bumper mounting, LH) - (1) - 824596
Bracket (bumper mounting, RH) - (1) - 824597

114. Fitting Kit (rear bumper) - (1) - RR1477
Kit includes items 115-140 :-
115. Joint Plate (centre to covers) - (2) - 575443

116. Joint Washer (centre to corner, LH) - (1) - 634932
Joint Washer (centre to corner, RH) - (1) - 634933
117. Nut - (6) - 502509
118. Washer (locking) - (6) - 510156
119. Washer (plain) - (6) - 502576
120. Bolt (bracket to chassis, 4" long) - (2) - HB932
121. Washer (plain) - (2) - WP9
122. Spacer (serrated, bracket to chassis) - (2) - 634728
123. Washer (plain) - (2) - WP9
124. Washer (locking) - (2) - WL209
125. Nut (plain) - (2) - HN2009
126. Spacer (round, bracket to chassis) - (2) - 634875
127. Bolt (bumper to bracket, 1 1/2" long) - (2) - HB912
128. Washer (locking) - (2) - WL209
129. Washer (plain) - (2) - WP9
130. Stud (bumper to support brackets) - (2) - 122344
131. Washer (plain) - (2) - WP9
132. Washer (locking) - (2) - WQ309
133. Nut (plain) - (2) - HN2009
134. Screw (outrigger to chassis frame) - (4) - HU905
135. Washer (locking) - (4) - WQ309
136. Washer (plain) - (4) - WM59
137. Screw (bumper cover to rear wing) - (2) - HU906
138. Washer (locking) - (2) - WL209
139. Washer (plain) - (2) - WP9
140. Washer (rubber) - (2) - GEX7330

141. Over Rider Assembly (LH) - (1) - 824896
Over Rider Assembly (RH) - (1) - 824897

142. Support (over rider, LH) - (1) - 730392
Support (over rider, RH) - (1) - 730393

143. Stay (over rider support, LH) - (1) - XKC1749
Stay (over rider support, RH) - (1) - XKC1750

144. Fitting Kit (rear over riders) - (1) - RR1478
Kit includes items 145-150 :-
145. Screw (support and stay to over rider) - (8) - HU708P
146. Washer (locking) - (8) - WL207
147. Washer (plain) - (8) - WP7
148. Screw (support stay to chassis) - (2) - HU811
149. Washer (locking) - (2) - WL208
150. Washer (plain) - (2) - WM808

151. Plinth (rear number plate) - (1) - YKC1668
152. Transfer ('Triumph') - (1) - 626861
153. Screw (plinth to bumper) - (3) - PX808
154. Washer (locking) - (3) - WL208

Consumables

155. WD40 (400ml can) - (ar) - GAC111

156. Studloc (Loctite, 10ml) - (ar) - GAC100

157. Grease (anti-seize, 85gm) - (ar) - RX1345

158. Chrome Polish (AutoGlym, 75gm) - (ar) - RX1321

Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form
News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us