|
|
|
Triumph TR6 Body Fittings - Doors |
|
Page Contents
Door Glass & Window Regulators
©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Doors & Hinges
Door Repairs
Door Handles & Remote Control
Door Latch & Striker
Door Locks
Door Glass & Window Regulators
Water Curtains
Door Window Weatherstrips
Door Aperture Furflex Seals
Matching Lock Sets
Consumables
1. 
Door Shell Assembly (RH) - (1) - 907758
Door Shell Assembly (LH) - (1) - 907757
European models.
All CP models; CR1 to CR5000; 1969 to 1973.
No side impact bars and no provision to fit the later door closing pull pocket.
Door Shell Assembly (RH) - (1) - 634834
Door Shell Assembly (LH) - (1) - 634833
European models.
From CR5001; 1973 to 1975.
No side impact bars and provision to fit the later door closing pull pocket.
Door Shell Assembly (RH) - (1) - 907758
Door Shell Assembly (LH) - (1) - 907757
North American models.
All CC models; 1969 to 1972.
No side impact bars and no provision to fit later door closing pull pocket.
Door Shell Assembly (RH) - (1) - 917560
Door Shell Assembly (LH) - (1) - 917559
North American models.
From CF1 to CF12500; 1973.
Side impact bars and no provision to fit later door closing pull pocket.
Door Shell Assembly (RH) - (1) - 634830
Door Shell Assembly (LH) - (1) - 634829
North American models.
From CF12501 to CF58328; 1974 to 1976.
Side impact bars and provision to fit the later door closing pull pocket.
2. Door Skin (RH) - (1) - 812776
Door Skin (LH) - (1) - 812775
Pierced for door handle and lock.
Door Skin (RH, aluminium) - (1) - 812776NPALUM
Door Skin (LH, aluminium) - (1) - 812775NPALUM
Alternative, unpierced.
3. Inner Panel (frame, RH) - (1) - 907311
Inner Panel (frame, LH) - (1) - 907310
4. Plate Assembly (reinforcement, RH) - (1) - 707060
Plate Assembly (reinforcement, LH) - (1) - 707059
5. Angle Bracket (check strap arm) - (2) - 613855A
6. Pad (sound deadening) - (2) - RB7145
To allow the door to be repaired, some additional original sub assembly components of the door assembly have been made available. The two most common repairs are to the door skin and/or bottom frame because of rust and the door check strap bracket that has been torn and split in service. The replacement of the angled bracket for the check strap is quite a straight forward task. The spot welds of the original item can be drilled out to release it and the replacement insert. The new item can be attached with weld as original. Those without welding facilities could attach the bracket with small nuts and bolts or even rivets after drilling to suit. The door frame assembly would be best repaired by cutting and welding and inserting a section as required.
Genuine original steel door skins are available to replace existing items as required. The door skins are made from zinc coated steel and are electrophoretically painted to give modern car corrosion resistance. Also available are aluminium door skins pressed on the original tools but not pierced for handles or lock.
Do not forget that when you get to grips with your door other parts may need renewing or repairing like glass channels private locks and hinges. These parts are also available to ease your restoration.
7. Door Hinge Assembly - (4) - 650112
8. Pin (hinge pivot) - (4) - 607823
9. Screw (hinge to door) - (12) - HU805
10. Washer (locking) - (12) - WQ308
11. Gasket (shim, hinge to door) - (ar) - 650112G
12. Screw (hinge to 'A' post) - (12) - HU806P
13. Washer (locking) - (12) - WQ308
14. Washer (plain) - (12) - WP19
15. Gasket (shim, hinge to 'A' post) - (ar) - 610042
16. Check Strap - (2) - 613622
17. Rivet (check strap to door) - (2) - 610707
While the check straps were originally attached by rivets, the clevis pin arrangement offered below is more satisfactory (and easier to install).
18. Fitting Kit (check strap) - (2) - 613622FK
Includes items 19, 20, 21.
19. Clevis Pin (check strap to door) - (2) - 104750
Replaces 17.
20. Washer (plain) - (4) - GHF300
Replaces 17.
21. 'R' Clip (clevis pin securing) - (2) - 511032
Replaces 17.
22. Spring (guide for check strap) - (2) - 603344
23. Rivet (guide spring to 'A' post) - (4) - 556141
24. gaiter (check strap) - (2) - 613623
25. Screw (self tapping, gaiter to 'A' post) - (4) - YB1383
26. Washer (plain) - (4) - WP3
27. Handle Assembly (door exterior) - (2) - 712837
28. Fitting Kit - (2) - 712837FK
Includes items 29-36 :-
29. Gasket (small, handle front to door) - (2) - 617403
30. gasket (large, handle rear to door) - (2) - 617402
31. Screw (handle, front) - (2) - HU503
32. Washer (locking) - (2) - WL205
33. Washer (plain) - (2) - WP5
34. Screw (handle, rear) - (2) - HU504
35. Washer (locking) - (2) - WL205
36. Washer (plain) - (2) - WP5
37. Remote Control (handle to latch, RH) - (1) - 712839
Remote Control (handle to latch, LH) - (1) - 712838
European models.
All CP models; CR1 to CR5000; 1969 to 1973.
North American models.
All CC models; 1969 to 1973.
Remote Control (handle to latch, RH) - (1) - XKC92
Remote Control (handle to latch, LH) - (1) - XKC91
European models.
From CR5001; 1973 to 1975.
North American models.
From CF12501; 1973 to 1976.
The later type remote control mechanisms are suitable for all applications. They vary from the earlier item because of a set in their form to avoid the interior door pull of the later cars in the door inner panel.
38. Screw (remote to inner door frame) - (6) - HU504
39. Washer (locking) - (6) - WL205
40. Washer (plain) - (6) - WP5
41. washer (waved) - (2) - 550924
42. Washer (plain) - (2) - WP161
43. Clip (door lock to remote control link) - (2) - 608703
44. Felt Pad (anti-rattle) - (2) - 612236
All models to CR/CF1.
Felt Pad (anti-rattle) - (2) - 633678
From CR/CF1.
45. Handle (door interior) - (2) - 621770
46. Escutcheon (handle to door casing) - (2) - 621221
European models.
All CP models; CR1 to CR5000; 1969 to 1973.
North American models.
All CC models; 1969 to 1973.
Escutcheon (handle to door casing) - (2) - 623843
European models.
From CR5001; 1973 to 1975.
North American models.
From CF12501; 1973 to 1976.
47. Spring (door panel to door frame) - (2) - 603382
48. Pin (door handle) - (2) - 600832
49. Door Latch Assembly (RH) - (1) - 907178
Door Latch Assembly (LH) - (1) - 907177
50. Screw (door latch single-slotted) - (6) - 517148
All models to CR/CF1.
Screw (door latch, cross-slotted) - (6) - ZKC36
From CR/CF1.
The above screws are interchangeable.
51. Striker Plate (RH) - (1) - CZA3310
Striker Plate (LH) - (1) - CZA3311
52. Shim (striker plate, 0.010) - (ar) - ZKC6167
Shim (striker plate, 0.032) - (ar) - 621714
Shim (striker plate, 0.064) - (ar) - BHH341
53. Screw (door striker, upper, single-slotted) - (2) - 517150
All models to CR1/CF1.
Screw (door striker, upper, cross-slotted) - (2) - ZKC37
From CR/CF1.
54. Screw (door striker, lower, single-slotted) - (4) - 517145
All models to CR/CF1.
Screw (door striker, lower, cross-slotted) - (4) - ZKC38
From CR/CF1.
The above screws are interchangeable.
55. Door Lock Assemblies (matched pair with 2 keys) - (1) - 631773
Original clip fitting type.
56. Gasket (door lock to doorskin) - (2) - 621732
57. Clip (door lock retaining) - (2) - 714599
58. Door Lock Assemblies (matched pair with 2 keys) - (1) - 631773NF
Replacement nut fitting type.
The replacement type nut fixing private door locks are more positively located in the door skin by a nut rather than a spring clip. This means that if the original private door lock assembly has, during service, rotated in the door skin and worn the shape and size of its piercing the spring clip will only hold it in place, allowing it to rotate when key operated.
59. Door Lock Assemblies (matched pair with 2 keys) - (1) - 631773SEC
Security lock type.
These lock sets replace the factory barrels, helping to keep those people with light fingers out. Supplied in pairs, with two spare keys.
60. Glass (door, clear) - (2) - 820508
Glass (door, tinted) - (2) - 820508T
61. Channel Assembly (lower, RH) - (1) - 712836
Channel Assembly (lower, LH) - (1) - 712835
62. Strip (rubber, door glass) - (2) - 617166
63. Channel & Brackets Assembly (front, RH) - (1) - 850431
Channel & Brackets Assembly (front, LH) - (1) - 850430
64. Channel (felt) - (ar) - 850430F
Use with original brackets for repair purposes only.
65. Screw (forward bracket to frame) - (2) - HU704
66. Screw (inside bracket to frame) - (4) - HU705P
67. Washer (shakeproof) - (6) - WN707
68. Washer (plain) - (6) - WM57
69. Washer (plain, channel adjusting) - (ar) - WP122
Use where required as shims between the channel brackets and door frames to align channels.
70. Channel Assembly (rear, RH) - (1) - 812437
Channel Assembly (rear, LH) - (1) - 812436
71. Channel (felt) - (ar) - 850430F
Use with original brackets for repair purposes only.
72. Screw (channel brackets to door frame) - (6) - HU705P
73. Washer (shakeproof) - (6) - WN707
74. Washer (pain) - (6) - WM57
75. washer (plain, channel adjusting) - (ar) - WP122
Use where required as shims between the channel brackets and door frames to align channels.
76. Tie Rod (glass channel bottom, RH) - (1) - 750166
Tie Rod (glass channel bottom, LH) - (1) - 750165
77. Regulator Mechanism (window, RH) - (1) - 907180
Regulator Mechanism (window, LH) - (1) - 907179
78. Screw (regulator to door frame) - (14) - HU704
79. Washer (locking) - (14) - WL207
80. Washer (plain) - (14) - WP7
81. Handle Assembly (window) - (2) - 621811
82. Knob (window handle) - (2) - 621768
83. Clip (securing knob to handle) - (2) - 574581
84. Clip (securing knob to handle) - (2) - NKC513
Alternative.
85. Escutcheon (handle to door panel) - (2) - 621221
86. Spring (door panel to door frame) - (2) - 603382
87. Pin (securing handle to mechanism) - (2) - 600832
88. Washer (sponge) - (2) - 609649
89. Bracket (door glass stop upper, LH) - (1) - 621969
Bracket (door glass stop upper, RH) - (1) - 621970
90. Screw (stop bracket to door frame) - (4) - HU503
91. Washer (locking) - (14) - WL205
92. Washer (plain) - (4) - WP5
93. Bracket Assembly (door glass stop) - (2) - 650242
94. Pad (felt, door glass stop) - (2) - AHH6434
Repair purposes, cut to fit.
95. Screw (stop bracket to door frame) - (4) - HU504
96. Washer (locking) - (4) - WL205
97. Washer (plain) - (4) - WP5
98. Water Curtain Assembly (door glass) - (2) - 611812
99. Water Curtain Assembly (front) - (2) - 611818
100. Waster Curtain Assembly (rear) - (2) - 611819
European models. All CP models; 1969 to 1973.
North American models. All CC models; 1969 to 1973.
98. Water Curtain Assembly (door glass) - (2) - 634192
99. Water Curtain Assembly (front) - (2) - 634194
100. Water Curtain Assembly (rear) - (2) - 634193
European models. All CR models; 1973 to 1975.
North American models. All CF models; 1973 to 1976.
101. Clip (water curtain attaching) - (10) - 502505
102. Waterproof Adhesive tape - (1) - GWS219
By the roll, alternative to door frame water curtains.
Omitting water curtains from a TR6 door when it is rebuilt will invariably mean rain water entering the door will soak the casing board and window regulator mechanism. This causes distortion or rotting of the casing board and rusting of the mechanism. The casing board can be protected by covering the access holes in the inner door frame with a heavy grade waterproof adhesive tape (a.k.a. 'tank tape' or 'gaffer tape') - the method now used by many modern car manufacturers.
Triumph originally listed a change point of CR1 and CF1 for the fitment of the above part numbered water curtains. The change of part numbers was not because of a change in design but due to an alteration of the material specification. In line with safety requirements and company policy, fire retardant or non flammable trim materials were specified and utilised where possible in the manufacture of Triumph cars.
103. Door Weatherstrip Kit - (1) - RR1529
One per car, includes items 104, 105, 106, 107.
104. Seal (window to door outer, RH) - (1) - 850325
Seal (window to door outer, LH) - (1) - 850324
105. Clip (securing seal to door frame) - (14) - 613869
106. Weatherstrip (door inner, RH) - (1) - 850323
Weatherstrip (door inner, LH) - (1) - 850322
107. Clip (securing inner weatherstrip) - (14) - GHF1582
108. Seal (upper 'A' post, door glass wo windscreen frame) - (2) - 620913
109. Draught Excluder;
Black - (2) - RX3000BLACK
Red - (2) - RX3000RED
Shadow Blue - (2) - RX3000BLUESHAD
Blue/Grey - (2) - RX3000BLUEGREY
Chestnut - (2) - RX3000CHESTNUT
110. Matching Lock Set - (1) - RR1392
Includes ignition tumbler, cubby box lock, door lock set and boot lock barrel with matched pair of FS keys.
To CP/CC50000; 1969.
Matching Lock Set - (1) - RR1393
Includes chrome cubby box lock, door lock set and boot lock barrel with matched pair of FS keys.
CP/CC50001 to CP/CC75000; 1970 to 1971.
Matching Lock Set - (1) - RR1394
Includes black cubby box lock, door lock set and boot lock barrel with matched pair of FS keys.
From CP/CC75001; 1972 to 1976.
111. WD40 (400ml can) - (ar) - GAC111
112. Studloc (Loctite, 10ml) - (ar) - GAC100
113. Grease (anti-seize, 85gm) - (ar) - RX1345
114. Glass Polish (AutoGlym, 300ml) - (ar) - RX1315
Return to TR6 Body Fittings & Bumpers Index 
Return to TR6 Index Page
Home
About Rimmer Bros.
Prices
General Info
Delivery
How to Order
Your Order Form
News
Restoration Projects
Picture Library
Triumph Links
Free Catalogue
Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.