All commission nos. CP/CC models; 1969 to 1972.

1. Vent Lid & Hinge Assembly - (1) - 705242
2. Pin (hinge) - (2) - 563040
3. Rod (operating vent lid) - (1) - 611117
4. Fixing (rod to vent lid) - (1) - FR1202
5. Grommet (rod through plenum) - (1) - 61917
6. Trunnion (rod to dash lever mechanism) - (1) - 612219
7. Screw (clamping trunnion to rod) - (1) - 564832
8. Spring - (1) - 611145
9. Screw (vent lid to scuttle) - (3) - HU503
10. Washer (locking) - (3) - WL205
11. Seal (vent lid to scuttle top panel) - (1) - 611118

Closing the vent lid (on cars so fitted) when the car is not in use will stop a lot of both water and debris from getting into the plenum. This is obviously not an option on cars with the plastic vent grille, but to assist in preventing debris from entering the plenum area on these cars, an accessory fine metal gauze (part number 722849X) may be fitted in the scuttle aperture under the vent grille.
There is another advantage to be gained from keeping the plenum area of the bulkhead clear. First time out in hot weather, you turn on the heater fan to cool the car interior. Don't you just hate the ticking of the fan, closely followed by the fascia air vents spitting forth at face level a potpourri of chopped leaves and insect bodies!

Scuttle Vent Grille

All commission no. CR/CF models; 1972 to 1976.

12. Vent Grille (plastic) - (1) - 722849
13. Screw - (2) - 517544
14. Spire Nut - (2) - FU25438
15. Plug (blanking, rod hole in plenum) - (ar) - CD27769
When rod is not fitted.
16. Gauze (prevents debris from entering heater) - (1) - 722849X

Radiator Air Duct & Valance Stay Rods

17. Air Duct (radiator) - (1) - 910442

European models.

Air Duct (radiator) - (1) - 910441

North American models.

18. Fitting Kit (air duct) - (1) - 910442FK

European models. Includes items 19-28.

Fitting Kit (air duct) - (1) - 910441FK

North American models. Includes items 19-28.

19. Screw (air duct to front valance) - (2) - YH6505

20. Washer (plain) - (2) - 510806

21. Spire Nut (top flange of valance) - (2) - FU2585

22. Screw (stay rod and duct to valance)* - (1/2) - 517385

23. Washer (locking)* - (1/2) - 510506

24. Washer (plain)* - (1/2) - 501795

25. Spire Nut* - (1/2) - FQ3405-4

26. Nut - (1) - 502450

European models.

27. Washer (locking) - (1) - 510506

European models.

28. Washer (plain) - (1) - 501795

European models.

29. Strap Assembly (air cleaner support) - (1) - 153282

European models.

30. Stayrod (valance to wheel arch, LH) - (1) - 714768

Stayrod (valance to wheel arch, RH)

31. Nut (stay rod to wheel arch) - (2) - 502450
32. Washer (locking) - (2) - 510506
33. Washer (plain) - (2) - 501795

Radiator Grille & Badge

---

34. Grille Assembly (black surround) - (1) - 816074
All CP/CC models; 1969 to 1972.
35. Grille Assembly (bright surround)* - (1) - 821295
36. Grille Surround (bright, upper)* - (1) - 722933
37. Grille Surround (bright, lower)* - (1) - 722934
* All CR/CF models; 1972 to 1976.

The only differences between the early and late radiator grilles are the stainless steel surrounds on the top and bottom edges of the later grille. The addition (or removal) of these surrounds will convert one grille assembly to the other.

38. Rivet (surround to grille) - (10) - 510473
RIvet (surround to grille) - (10) - 577424
Alternative.

39. Nut (plain, grille to front valance) - (8) - HN2005
40. Washer (locking) - (8) - WL205
41. Washer (plain) - (8) - WP5
42. Finisher (lower, grille to front valance) - (1) - 714831
43. Badge & Plinth Assembly (grille, 'TR6' enamelled badge)** - (1) - 717060
44. Badge ('TR6' enamelled)** - (1) - 625662
45. Plinth (badge holder)** - (1) - 716930
46. Washer (rubber)** - (2) - 625898
47. Washer (locking) - (2) - WL204
48. Nut** - (2) - HN2054
** To commission no. CR2911 & CF12500; 1969 to 1973.

49. Badge & Plinth Assembly (grille, 'TR6', printed foil badge)*** - (1) - ZKC1224
50. Badge ('TR6', printed foil)*** - (1) - ZKC1223
51. Plinth (badge holder)*** - (1) - YKC1319

52. Screw (badge plinth to grille)*** - (1) - 575935
Screw (badge plinth to grille)*** - (1) - HU459

53. Washer (locking)*** - (1) - WL204
54. Washer (plain)*** - (1) - WP4
*** From commission no. CR5001 & CR12501; 1973 to 1976.

Spoiler

---

All CR/CF models; 1972 to 1976.

55. Spoiler (aerodynamic) - (1) - GLZ606
56. Fitting Kit (spoiler securing) - (1) - GLZ606FK
Includes items 57, 58, 59.
57. Screw (spoiler) - (5) - PX506
58. Washer (plain) - (10) - WP124
59. Nut (nyloc) - (5) - 251345

The front spoiler can also be fitted to earlier TR6 models. It is attached by means of five no.10 UNF screws and nuts: three holding it to the valance and one to the lower edge of each front wing. Later valances are pierced for the screws, early valances will need drilling as well as the front wings.

Windscreen Capping

---

60. Capping (polished aluminium, top of windscreen frame) - (1) - 714429
61. Rivet ('pop' type) - (9) - 713531

62. Plug (blanking hard top bolt holes) - (2) - 612235
To commission no. CR2911 and CF12500; 1969 to 1973.
Plug (blanking hard top bolt holes) - (2) - 612976
From commission no. CR5001 and CF12501; 1973 to 1976.

Front Wing House Badge

---

63. House Badge ('British Leyland') - (2) - 725525
Silver on blue.
From commission no. CP75001 and CC75001; 1972 to 1976.

Door Mirrors

---

64. Door Mirror ('Tex', replacement, LH) - (1) - GAM214
Door Mirror ('Tex', replacement, RH) - (1) - GAM213
Bright finish.

Door Mirror ('Tex', replacement, LH) - (1) - GAM262
Door Mirror ('Tex', replacement, RH) - (1) - GAM261
Black finish.

65. Mirror Glass (replacement) - (ar) - GAM238
66. Wedge Plate - (ar) - DZB5208
67. Plinth Gasket - (ar) - CZA7164
68. Screw (wedge plate to plinth) - (ar) - AC610081
69. Door Mirror (bullet style, flat lens)* - (ar) - GAM105
Bright finish.
70. Door Mirror* - (2) - 622352
Chrome finish.
71. Stem* - (2) - 622350
72. Mirror Head* - (2) - 622351

73. Door Mirror (LH)* - (1) - YKC2959
Door Mirror (RH*) - (1) - YKC2960
Chrome finish.

74. Plinth Gasket* - (2) - 724199
* Optional fitment.

Sill Mouldings

---

75. Moulding (sill finisher, 7/16" wide) - (2) - 623421
All CP/CC models; 1969 to 1972.
Moulding (sill finisher, 5/8" wide) - (2) - 625212
All CR/CF models; 1972 to 1976.

76. Rivet (moulding to sill) - (14) - 567228
All CP/CC models; 1969 to 1972.
Rivet (moulding to sill) - (14) - 621943
All CR/CF models; 1972 to 1976.

Kick Plates

---

77. Kick Plate (stainless steel, pair) - (1) - RR1304
With 'TR6' logo, fits on top of sill.
Kick Plate (stainless steel, pair) - (1) - RL1067
With 'Triumph' logo, fits on top of sill.

78. Screw (kick plate to sill) - (6) - 575937

'B' Post Finishers

---

79. Finisher ('B' post, RH) - (1) - 622748
80. Finisher ('B' post, LH) - (1) - 622747
81. Screw (finisher securing) - (2) - AT606042
82. Stud (black) - (2) - 713511
83. Rivet - (2) - 713531

Rear Wing Beading

---

To CP/CC50000; 1969 models.

84. Beading Assembly (wing to rear deck) - (2) - 715230
85. Tag (beading attachment) - (12) - 553926

Wing beading was fitted only to the 1969 model year cars. Made from stainless steel, it was over-sprayed in body colour during production.

Rear Wing Decals

---

86. Rear Wing Decal (TR6, red) - (2) - 625666
For white cars only.
Rear Wing Decal (TR6, white) - (2) - 625667
For all other colours except yellow or white.
Rear Wing Decal (TR6, black) - (2) - 625668
For yellow cars only.

87. Rear Wing Decal (Union Jack, RH) - (1) - 726830
North American models.
From commission no. CF1; 1973 to 1976.
Rear Wing Decal (Union Jack, LH) - (1) - 726831
North American models.
From commission no. CF1; 1973 to 1976.

The Union Jack style rear wing decals were originally factory applied only to 1974 onwards North American TR6s, but can of course be fitted to any model if required!

Body Stripes

---

European Models
A 3mm pin stripe runs the length of the vehicle along the body line. The stripe kit includes sufficient material for a complete car.

88. Stripe Kit (black) - (1) - RR1189
Stripe Kit (gold) - (1) - RR1192
Stripe Kit (silver) - (1) - RR1190
Stripe Kit (red) - (1) - RR1191
Stripe Kit (white) - (1) - RR1301

North American Models
Two broad stripes run the length of the vehicle and over the rear of the front wing to bonnet. The stripe kit includes sufficient material for a complete car.

89. Stripe Kit (black) - (1) - RR1193
Stripe Kit (gold) - (1) - RR1196
Stripe Kit (silver) - (1) - RR1194
Stripe Kit (red) - (1) - RR1195

Rear Valance Badges

---

90. Nameplate ('Triumph', Cloisonne) - (1) - 625430
To commission no. CP/CC51615; 1969 to 1970.
91. Nameplate ('Triumph', with self adhesive label) - (1) - 627563
European models, form commission no. CP51616; 1970 to 1975.
North American models, from commission no. CC51616 to CF27000; 1970 to 1974.
92. Printed Foil ('Triumph') - (1) - 627564
European models, from commission no. CP51616; 1970 to 1975.
North American models, from commission no. CC51616 to CF27000; 1970 to 1974.
93. Blind Fix - (2) - GHF1532
94. Spire Fix - (2) - FP10129
Alternative.

95. Badge (rear valance, 'Overdrive', black) - (1) - 624236
Original for TR6.
Badge (rear valance, 'Overdrive', cream) - (1) - 622152
Alternative.

96. Badge (rear valance, 'Injection') - (1) - 626717
European models, all CP/CR models not fitted with overdrive.
97. Plinth (rear number plate)* - (1) - YKC1668
98. nameplate ('Triumph')* - (1) - 626861
99. Screw (plinth to bumper)* - (3) - PX808
100. Washer (locking)* - (3) - WL208
* North American models, from commission no. CF27001; 1974 to 1976.

Wheel Trim Badges

---

101. Badge Assembly (hub cap centre) - (4) - 627502
From commission no. CP50001.
102. Decal ('TR6', self adhesive) - (4) - 627502S
From commission no. CP50001.

Chassis/Commission No. Plate

---

103. Commission Number Plate - (1) - See Commission Plates

Mud Flap Set

---

104. Mud Flap Set (pair, includes fittings, with 'TR Laurel Wreath' logo) - (1) - GAC6002X

Wheel Arch Protectors

---

Protects your TR6 from the elements. Pre-cut heavy duty plastic fits inside your front or rear wheel arches. Hardware and instructions included. Supplied as a pair.

105. Wheel Arch Protector Set (front) - (1) - GTK160
106. Wheel Arch Protector Set (rear) - (1) - GTK161

Boot Racks

---

107. Boot Rack (chrome frame, wood slats) - (1) - RX1330
Includes fittings.
108. Boot Rack (all chrome) - (1) - RX1330CHROME
Includes fittings.
109. Boot Rack (amco style, stainless steel) - (1) - AM5347SS
High quality, specifically for TR6. Less fittings.

110. Fitting Kit (for amco style boot rack) - (1) - AM5347FK
Fitting Kit (for wood/chrome boot rack) - (1) - RX1330FITTINGS

Consumables

---

111. Chrome Polish (AutoGlym, 75g) - (ar) - RX1321



Return to TR6 Body Fittings & Bumpers Index      Return to TR6 Index Page

Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form
News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us

©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.