RH Steering

1. Brake Pipe Set* - (1) - RR1429RHD
Imperial threaded calipers. To commission no. CP76094.
Brake Pipe Set* - (1) - RR1430RHD
Metric threaded calipers. From commission no. CP76095.
NOTE: * Brake pipe sets do not include flexible hoses.

2. Brake Hose Set - (1) - RR1428
Includes four flexible rubber hoses.
Brake Hose Set - (1) - RR1428GR
Includes four flexible stainless steel braided hoses.

3. Hose (flexible, front, rubber) - (2) - GBH203
Hose (flexible, front, braided) - (2) - GBH203GR

4. Nut (half, hose ends to brackets) - (4) - NT606041
5. Washer (shakeproof) - (4) - GHF323

6. Hose (flexible, rear, LH, rubber) - (1) - GBH178
Hose (flexible, rear LH, braided) - (1) - GBH178GR

7. Nut (half, hose end to trailing arm) - (1) - NT606041
8. Washer (shakeproof) - (1) - GHF323
9. Washer (copper, hose to 3 way connector) - (1) - 233220A

10. Hose (flexible, rear, RH, rubber) - (1) - GBH177
Hose (flexible, rear, RH, braided) - (1) - GBH177GR

11. Nut (half, securing front hose ends) - (2) - NT606041
12. Washer (shakeproof) - (2) - GHF323

Hardware & Fittings for Brake Pipes

13. Clip (retaining pipes to bulkhead) - (2) - 149059
14. Clip (double, front brake pipes to master cylinder bracket) - (1) - 150969
15. Clip (retaining pipe, master cylinder to 3 way connector) - (1) - 149766
16. Clip (retaining clutch and brake pipes to bulkhead) - (4) - 119147
17. Screw (self tapping) - (8) - AB606039
18. Connector (3 way, front) - (1) - BTB657
19. Bolt (connector to chassis) - (1) - BH604101
20. Washer (plain) - (1) - WP7
21. Nut (nyloc) - (1) - TN3207
22. Clip (spring, RH pipe to cross member) - (1) - 59191
23. Clip (pipe to suspension stay) - (1) - 137048
24. Union (double ended, intermediate pipes) - (2) - ACB5559
25. Connector (3 way, rear) - (1) - BTB657
26. Bolt (connector to chassis) - (1) - BH604101
27. Washer (plain) - (1) - WP7
28. Nut (nyloc) - (1) - TN3207
29. Clip (pipe to rear chassis crossmember) - (1) - 618386
30. Clip (pipe to trailing arm) - (2) - 615836
31. Clip (spring, pipe to centre chassis member) - (1) - 59191
32. Clip (brake and fuel pipe to chassis) - (ar) - 149765
33. Rivet ('Pop' type, clip to chassis) - (ar) - 560772

Servo Hose & Fittings (RHD)

RH Steering

34. Hose (servo to manifold 25" long) - (1) - 149329
35. Clip ('Corbin', servo hose clamping) - (2) - CC5011
36. Valve & Adaptor (non-return, screwed into inlet manifold) - (1) - 144373
37. Washer (fibre) - (1) - WF513

Clutch Pipes (RHD)

RH Steering

38. Pipe (cylinder to flexible hose) - (1) - 308362
39. Connector (pipe to hose) - (1) - 598693
40. Hose (flexible, connector to slave cylinder - (1) - 140420
Original spec.
41. Hose (flexible, braided, stainless steel) - (1) - 140420GR
Alternative, uprated spec.

Brake Pipes (LHD)

LH Steering

42. Brake Pipe Set* - (1) - RR1429LHD
Imperial threaded calipers. To commission no. CP76094/CC81078.
Brake Pipe Set* - (1) - RR1430LHD
Metric threaded calipers. From commission no. CP76095/CC81079.
NOTE: * Brake pipe sets do not include flexible hoses.

43. Brake Hose Set - (1) - RR1428
Includes four flexible rubber hoses.
Brake Hose Set - (1) - RR1428GR
Includes four flexible stainless steel braided hoses.

44. Hose (flexible, front, rubber) - (2) - GBH203
Hose (flexible, front, braided) - (2) - GBH203GR

45. Nut (half, hose ends to brackets) - (4) - NT606041
46. Washer (shakeproof) - (4) - GHF323

47. Hose (flexible, rear, LH, rubber) - (1) - GBH178
Hose (flexible, rear, LH, braided) - (1) - GBH178GR

48. Nut (half, hose end to trailing arm) - (1) - NT606041
49. Washer (shakeproof) - (1) - GHF323
50. Washer (copper, hose to 3 way connector) - (1) - 233220A

51. Hose (flexible, rear, RH, rubber) - (1) - GBH177
Hose (flexible, rear, RH, braided) - (1) - GBH177GR

52. Nut (half, securing front hose ends) - (2) - NT606041
53. Washer (shakeproof) - (2) - GHF323

Hardware & Fittings for Brake Pipes

54. Connector (3 way, front) - (1) - BTB657
55. Bolt (connector to chassis) - (1) - BH604101
56. Washer (plain) - (1) - WP7
57. Nut (nyloc) - (1) - TN3207

58. PDWA Valve & Switch (brass)* - (1) - 149972
PDWA Valve & Switch (cast iron)* - (1) - RTC2525

59. Switch (pressure warning)* - (1) - 149971
Switch (pressure warning)** - (1) - AAU1700A

60. Repair Kit (PDWA valve)* - (1) - BAU1704A
61. Repair Kit (PDWA valve)** - (1) - BAU1775
* Original.
** Alternative.
As assemblies, the cast iron and brass valves are inter changeable; however the actuator switches screwed into the bodies are not. The switch to fit the brass valve, 149971, has a coarse pitch thread of approximately 9mm diameter, whereas the switch for the cast iron valve, AAU1700A, has a fine pitch thread of approximately 15mm diameter.
The pressure differential warning valve in the L.H.D. brake system will cause the brake warning light to be lit after almost any work on the brake system. Usually the light will not go out even after the brakes are bled and the brake system is in perfect working order. Re centralise the shuttle as per the work shop manual instructions.

62. Bolt (PDWA valve to body) - (1) - HB709
63. Washer (locking) - (1) - WL207
64. Nut (nyloc) - (1) - TN3207
65. Clip (spring, RH pipe to cross member) - (1) - 59191
66. Clip (pipe to turret support) - (1) - 137048
67. Clip (spring, pipe to centre chassis member) - (1) - 59191
68. Union (double ended, intermediate to rear pipe connecting) - (1) - ACB5559
69. Connector (3 way, rear) - (1) - BTB657
70. Bolt (connector to chassis) - (1) - BH604101
71. Washer (plain) - (1) - WP7
72. Nut (nyloc) - (1) - TN3207
73. Clip (pipe to rear chassis crossmember) - (1) - 618386
74. Clip (pipe to trailing arm) - (2) - 615836
75. Clip (brake and fuel pipe to chassis) - (ar) - 149765
76. Rivet ('Pop' type, clip to chassis) - (ar) - 560772

Servo Hose & Fittings (LHD)

LH Steering

77. Hose (servo to manifold 37" long) - (1) - 149330
78. Clip ('Corbin', servo hose clamping) - (2) - CC5011
79. Valve & Adaptor (non-return, screwed into inlet manifold) - (1) - 144373
80. Washer (fibre) - (1) - WF513
81. Clip (servo hose to rocker cover) - (1) - 514048

Clutch Pipes (LHD)

LH Steering

82. Pipe (cylinder to flexible hose) - (1) - 148816
83. Connector (pipe to hose) - (1) - 598693
84. Hose (flexible, connector to slave cylinder) - (1) - 140420
Original spec.
85. Hose (flexible, stainless steel braided, connected to slave cylinder) - (1) - 140420GR
Alternative, uprated spec.
86. Clip (clutch pipe to bulkhead) - (1) - 618303
87. Screw (self tapping, pipe clip to bulkhead) - (1) - YZ3303

Consumables

88. Grease (coppper, anti-seize, 85gm) - (ar) - RX1345

89. Brake Rubber Grease - (ar) - 514578

Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form
News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us