|
|
|
Triumph TR6 Front Suspension |
|
Page Contents
Coil Springs & Shock Absorbers
Suspension Bush Kits - Front & Rear
Front Rear Car Set Suspension Bolt Kits - Front & Rear
©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Fulcrum Pin & Ball Joint
Vertical Link & Tie Rod Lever
Front Hubs
Coil Springs & Shock Absorbers
Trunnions & Lower Wishbones
Anti-Roll Bar
Miscellaneous
Front Suspension Kits
Suspension Bush Kits - Front & Rear
Suspension Bolt Kits - Front & Rear
1. 
Fulcrum Pin (upper) - (2) - 200659
2. Screw (fulcrum pin) - (8) - HU908
3. Washer (locking) - (8) - WL209
4. Arm (wishbone upper front) - (2) - 133504
5. Arm (wishbone upper rear) - (2) - 133507
6. Bush (rubber, upper inner wishbone) - (8) - 102228
Bush (polyurethane, upper inner wishbone) - (4) - 102228POLY
Each replaces 2 original bushes.
7. Washer (fulcrum pin) - (4) - WM69
8. Nut *slotted, fulcrum pin) - (4) - LN2210
9. Split Pin (fulcrum nut) - (4) - PC10
10. Nut (nyloc) - (4) - TN3210
Alternative.
11. Ball Joint (top) - (2) - GSJ131
Includes gaiter/clip/washer/nut.
12. Gaiter (ball joint) - (2) - 138509
13. Clip (ball joint gaiter) - (2) - 138869
14. Washer (plain) - (2) - WP11
15. Nut (slotted, ball joint to vertical link) - (2) - LN2211
16. Split Pin (ball joint nut) - (2) - PC10
17. Nut (nyloc) - (2) - YN2911
Alternative.
18. Grease Nipple - (2) - 501024
As fitted.
19. Bolt (ball joint to wishbone) - (4) - 112347
20. Washer (plain) - (4) - WP45
21. Nut (nyloc, ball joint bolt) - (4) - YN2909
22. Vertical Link (LH) - (1) - 307216
Vertical Link (RH) - (1) - 307215
23. Grease Nipple (vertical post) - (2) - 56934
24. Tie Rod Lever (steering, LH) - (1) - 307212
Tie Rod Lever (steering, RH) - (1) - 307211
25. Plate (mounting brake caliper, LH) - (1) - 133500
Plate (mounting brake caliper, RH) - (1) - 133499
26. Bolt (mounting plate, lower rear) - (2) - 118324
27. Bolt (mounting plate, lower front) - (2) - SH606065
28. Bolt (plate & tie rod lever, upper rear) - (2) - 113143
29. Bolt (plate & tie rod lever, upper front) - (2) - 112032
30. Washer (tab, locking bolt heads) - (4) - 106641
31. Distance Piece (mounting plate & tie rod to vertical link) - (4) - 107106
32. Nut (nyloc) - (4) - YN2909
33. Nut 9nyloc, brake shield attachment) - (2) - TN3209
34. Washer (plain, nut to disc shield) - (2) - WP45
35. Stud Axle - (2) - 115763
36. Wheel Bearing Kit - (2) - GHK1021
2 required per car.
37. Seal Assembly (felt in steel retainer) - (2) - GHS110
38. Bearing (inner) - (2) - GHB111
39. Bearing (outer) - (2) - GHB110
40. Split Pin - (2) - PC20
41. Hub (steel wheel, includes studs) - (2) - 114284
42. Stud (steel wheel) - (8) - 114282
Steel wheel fitted cars.
43. Wheel Nut (steel wheels) - (8) - 109586
For fitment without wheel trim. To commission no. CP/CC5000.
44. Nut & Washer Kit (chrome, car set)* - (1) - 154470KIT
Nut & Washer Kit (stainless, car set)* - (1) - 154470KITSS
45. Wheel Nut (chrome)* - (16) - 154470
Wheel Nut (stainless)* - (16) - 154470SS
46. Washer (plastic)* - (16) - 154466
* From commission no. CP/CC50001 (with wheel trim).
47. Hub (wire wheel, includes studs)** - (2) - 114283
48. Stud (hub to wire wheel adaptor)** - (8) - 114281
49. Nut (special, extension to hub)** - (8) - 110366
50. Splined Extension (wire wheel, LH)** - (1) - 217603
Splined Extension (wire wheel, RH)** - (1) - 217602
** Wire wheel fitted cars.
51. Washer ('D' special) - (2) - 102690
52. Nut (slotted, hub attachment) - (2) - LN2211
53. Cap (grease retaining) - (2) - 102689
54. Nut 9stub axle retaining) - (2) - TN3211
55. Washer (stub axle) - (2) - WP11
56. Front Coil Spring - (2) - 213165
Front Coil Spring (uprated) - (2) - 213165UR
420lb / 1" lowered.
57. Insulator (rubber) - (4) - 100751
58. Shock Absorber - (2) - GSA272
Includes mounting rubbers,washer & nuts.
59. Shock Absorber Set (Spax adjustable) - (1) - GSA272SPAX
Set includes 1 pair of shock absorbers & standard mountings.
60. Shock Absorber Set (Koni adjustable) - (1) - GSA272KONI
Set includes 1 pair of shock absorbers & standard mountings.
61. Bush (upper, rubber) - (4) - 152588
Included with shock absorber.
Bush (upper, polyurethane) - (4) - 152588POLY
Alternative.
62. Washer (plain, upper) - (2) - 140479
63. Washer (plain, lower) - (2) - 140416
64. Nut (plain) - (2) - HN2009
65. Nut (half) - (2) - JN2109
66. Nut (nyloc) - (2) - YN2909
Alternative.
67. Bush (lower, rubber) - (2) - 119450
Bush (lower, polyurethane) - (2) - 119450POLY
68. Bracket (shock absorber, lower) - (4) - 106843
69. Bolt (shock absorber to bracket) - (2) - HB1020
70. Nut (nyloc, shock absorber to bracket) - (2) - TN3210
71. Washer (plain) - (8) - WL209
72. Nut (nyloc, bracket to spring pan) - (8) - HN2009
73. Bottom Trunnion Assembly (LH) - (1) - 142378
Bottom Trunnion Assembly (RH) - (1) - 142377
When the trunnion is installed on the vertical link it should be lubricated with hypoid gear oil (EP90) not grease. The trunnion and vertical link assembly should be lubricated regularly to preserve long service life.
74. Seal (trunnion to vertical link) - (2) - 142402
75. Screw (lock stop attaching) - (2) - HU811
76. Washer (locking) - (2) - WL222
77. Stop (steering lock) - (2) - 156111
78. Wishbone (lower, LH front & RH rear) - (2) - 307209
79. Wishbone (lower, RH front & LH rear) - (2) - 307210
80. Bolt (pivot, trunnion to lower wishbone) - (2) - 139835
81. Distance Piece - (4) - 139832
82. Bearing (nylon, tophat shaped) - (8) - 139833
83. Washer (plain steel, thrust) - (8) - 142388
84. Ring (rubber, sealing) - (8) - 142387
85. Shield (water) - (8) - 139834
86. Nut (slotted) - (2) - LN2212
87. Split Pin - (2) - PC12
88. Bolt (wishbone to bracket) - (4) - HB1121
89. Bush (inner wishbone, rubber) - (4) - 141481
Bush (inner wishbone, polyurethane) - (4) - 141481POLY
Alternative.
90. Nut (nyloc) - (4) - YN2911
91. Bracket (lower fulcrum) - (4) - 148691
92. Shim (adjusting, bracket to chassis) - (ar) - 139727
93. Washer (plain) - (8) - WM59
94. Nut (nyloc) - (8) - YN2909
95. Lower Spring Pan Assembly - (2) - 140951
96. Bolt (spring pan to wishbone) - (6) - HB916
Quantity decreases when anti-roll bar fitted.
Bolt (spring pan and roll bar bracket to wishbone) - (2) - HB921
With anti-roll bar.
97. Stud (spring pan to wishbone) - (4) - 143712
98. Nut (nyloc) - (12) - YN2909
99. Washer (plain) - (12) - WP20X
100. Anti-Roll Bar - (1) - 215647
101. Link Assembly (anti-roll bar to wishbone) - (2) - 152143A
102. Washer - (4) - 517983
103. Washer - (4) - 517984
104. Mounting Bush (rubber) - (4) - 517985
Mounting Bush (polyurethane) - (4) - 517985POLY
Alternative.
105. Tube (distance) - (2) - 517986
106. Nut (nyloc) - (2) - YN2909
107. Washer (plain) - (4) - WA600071
108. Nut (nyloc) - (2) - YN2910
109. Bracket (mounting, link to wishbone) - (2) - 152144
110. Packing Piece (bracket to wishbone) - (2) - 152145
111. Bush (rubber, locating anti-roll bar) - (2) - 123998
Bush (polyurethane) - (2) - 123998POLYTR
Alternative.
112. Bracket (clamp, securing anti-roll bar) - (2) - 123502
113. 'U' Bolt (plain, anti-roll bar bracket) - (2) - 123694
114. 'U' Bolt (with towing eyes) - (2) - 139126
Alternative.
115. Washer (plain) - (4) - WP107
116. Nut (nyloc) - (4) - YN2908
117. Screw (front hub grease cap removal) - (1) - HU508
118. Coil Spring Compressor - (1) - GAC5076
119. Studloc (Loctite, 10ml) - (ar) - GAC100
120. Grease (copper, anti-seize, 85gm) - (ar) - RX1345
121. Grease (lithium multi purpose, 400gm) - (ar) - GGL111
122. WD40 (400ml can) - (ar) - GAC111
123. COMPLETE SUSPENSION OVERHAUL KIT;
With rubber bushes - (1) - RR1259
With polyurethane bushes - (1) - RR1259POLY
The kit contains the following parts (in red):-
6. Bush (rubber, upper inner wishbone) - (8) - 102228
Include in RR1259.
Bush (polyurethane, upper inner wishbone) - (4) - 102228POLY
Included in RR1259POLY.
7. Washer (fulcrum pin) - (4) - WM69
8. Nut (slotted, fulcrum pin) - (4) - LN2210
9. Split Pin (fulcrum nut) - (4) - PC10
11. Ball Joint (top) - (2) - GSJ131
19. Bolt (ball joint to wishbone) - (4) - 112347
20. Washer (plain) - (4) - WP45
21. Nut (nyloc, ball joint bolt) - (4) - YN2909
27. Screw (mounting plate, lower front) - (2) - SH606065
29. Bolt (plate & tie rod lever, upper front) - (2) - 112032
31. Distance Piece (mounting plate & tie rod lever to vertical link) - (4) - 107106
32. Nut (nyloc) - (4) - YN2909
37. Seal Assembly (felt in steel retainer) - (2) - GHS110
38. Bearing (inner) - (2) - GHB111
39. Bearing (outer) - (2) - GHB110
40. Split Pin - (2) - PC20
54. Nut (stub axle retaining) - (2) - TN3211
55. Washer (stub axle) - (2) - WP11
57. Insulator (rubber) - (4) - 100751
67. Bush (lower, rubber) - (2) - 119450
Included in RR1259.
Bush (lower, polyurethane) - (2) - 119450POLY
Included in RR1259POLY.
69. Bolt (shock absorber to bracket) - (2) - HB1020
70. Nut (nyloc, shock absorber to bracket) - (2) - TN3210
71. Washer (plain) - (8) - WL209
72. Nut (bracket to spring pan) - (8) - HN2009
73. Bottom Trunnion Assembly (LH) - (1) - 142378
Bottom Trunnion Assembly (RH) - (1) - 142377
74. Seal (trunnion to vertical link) - (2) - 142402
75. Screw (lock stop attaching) - (2) - HU811
80. Bolt (pivot, trunnion to wishbone) - (2) - 139835
81. Distance Piece - (4) - 139832
82. Bearing (nylon, top hat shaped) - (8) - 139833
83. Washer (plain steel, thrust) - (8) - 142388
84. Ring (rubber, sealing) - (8) - 142387
85. Shield (water) - (8) - 139834
86. Nut (slotted) - (2) - LN2212
87. Split Pin - (2) - PC12
88. Bolt (wishbone to bracket) - (4) - HB1121
89. Bush (inner wishbone rubber) - (4) - 141481
Included in RR1259.
Bush (inner wishbone, polyurethane) - (4) - 141481POLY
Included in RR1259POLY
90. Nut (nyloc) - (4) - YN2911
96. Bolt (spring pan to wishbone) - (6) - HB916
Bolt (spring pan and roll bar bracket to wishbone) - (2) - HB921
97. Stud (spring pan to wishbone) - (4) - 143712
101. Link Assembly (anti-roll bar to wishbones) - (2) - 152143A
111. Bush (rubber, anti-roll bar) - (2) - 123998
Included in RR1259.
Bush (polyurethane, anti-roll bar) - (2) - 123998POLY
Included in RR1259POLY.
112. Bracket (clamp, securing anti-roll bar) - (2) - 123502
113. 'U' Bolt (plain, anti-roll bar bracket) - (2) - 123694
115. Washer (plain) - (4) - WP107
116. Nut (nyloc) - (4) - YN2908
124. UPPER SUSPENSION OVERHAUL KIT;
With rubber bushes - (2) - RR1260
With polyurethane bushes - (2) - RR1260POLY
The kit contains the following parts (in red):-
6. Bush (upper inner wishbone, rubber) - (4) - 102228
Included in RR1260.
Bush (upper inner wishbone, polyurethane) - (2) - 102228POLY
Included in RR1260POLY
7. Washer (fulcrum pin) - (2) - WM69
8. Nut (slotted, fulcrum pin) - (2) - LN2210
9. Split Pin (fulcrum nut) - (2) - PC10
19. Bolt (ball joint to wishbone) - (2) - 112347
20. Washer (plain) - (2) - WP45
21. Nut (nyloc, ball joint bolt) - (2) - YN2909
125. LOWER INNER SUSPENSION OVERHAUL KIT;
With rubber bushes - (2) - RR1261
With polyurethane bushes - (2) - RR1261POLY
The kit contains the following parts (in red):-
67. Bush (lower, rubber) - (1) - 119450
Included in RR1261.
Bush (lower, polyurethane) - (1) - 119450POLY
Included in RR1261POLY.
69. Bolt (shock absorber to bracket) - (1) - HB1020
70. Nut (nyloc, shock absorber to bracket) - (1) - TN3210
88. Bolt (wishbone to bracket) - (2) - HB1121
89. Bush (inner wishbone, rubber) - (2) - 141481
Included in RR1261.
Bush (inner wishbone, polyurethane) - (2) - 141481POLY
Included in RR1261POLY.
90. Nut (nyloc) - (2) - YN2911
126. FRONT ANTI-ROLL BAR KIT;
With rubber bushes - (1) - RR1262
With polyurethane bushes - (1) - RR1262POLY
The kit contains the following parts (in red):-
101. Link Assembly (anti-roll bar to wishbones) - (2) - 152143A
111. Bush (locating anti-roll bar, rubber) - (2) - 123998
Included in RR1262.
Bush (locating anti-roll bar, polyurethane) - (2) - 123998POLY
Included in RR1262POLY.
112. Bracket (clamp, securing anti-roll bar) - (2) - 123502
113. 'U' Bolt (plain, anti-roll bar bracket) - (2) - 123694
115. Washer (plain) - (4) - WP107
116. Nut (nyloc) - (4) - YN2908
127. COMPLETE TRUNNION OVERHAUL KIT;
The kit contains the following parts (in red):-
73. Bottom Trunnion Assembly (LH) - (1) - 142378
Bottom Trunnion Assembly (RH) - (1) - 142377
74. Seal (trunnion to vertical link) - (2) - 142402
75. Screw (lock stop attaching) - (2) - HU811
80. Bolt (pivot, trunnion to wishbone) - (2) - 139835
81. Distance Piece - (4) - 139832
82. Bearing (nylon, top hat shaped) - (8) - 139833
83. Washer (plain steel, thrust) - (4) - 142388
84. Ring (rubber, sealing) - (8) - 142387
85. Shield (water) - (8) - 139834
86. Nut (slotted) - (2) - LN2212
87. Split Pin - (2) - PC12
128. TRUNNION BUSH KIT - (2) - RR1094
The kit contains the following parts (in red):-
81. Distance Piece - (2) - 139832
82. Bearing (nylon, top hat shaped) - (4) - 139833
84. Ring (rubber, sealing) - (4) - 142387
85. Shield (water) - (4) - 139834
129. TRUNNION OVERHAUL KIT (RH) - (1) - RR1264
TRUNNION OVERHAUL KIT (LH) - (1) - RR1265
The kit contains the following parts (in red):-
73. Bottom Trunnion Assembly (RH) - (1) - 142377
Bottom Trunnion Assembly (LH) - (1) - 142378
74. Seal (trunnion to vertical link) - (1) - 142402
75. Screw (lock stop attaching) - (1) - HU811
80. Bolt (pivot, trunnion to wishbone) - (1) - 139835
83. Washer (plain, steel, thrust) - (2) - 142388
86. Nut (slotted) - (1) - LN2212
Standard material - (1) - RR1418
Polyurethane material - (1) - RR1418POLY
Includes :-
Upper Wishbone Bush x 8, (4 supplied in polyurethane - 1 replaces 2 original), Lower Inner Wishbone Bush x 4, Anti-Roll Bar Mounting Bush x 2, Anti-Roll Bar End Link Bush x 4, Front Damper Upper Bush x 4, front Damper Lower Bush x 2 & Steering Rack Mounting Bush x 2.
Standard material - (1) - RR1419
Polyurethane material - (1) - RR1419POLY
Includes :-
Trailing Arm Bush x 4, Rear Axle Front Mounting Cone/Cup Bush x 4 & Rear Damper (Lever) Link Bush x 4.
Standard material - (1) - RR1420
Polyurethane material - (1) - RR1420POLY
Includes front and rear bush kits as listed above.
These kits include all necessary bolts, nuts and washers to install the bush kits listed above.
N.B. Excludes special washers which are assumed to be re-used.
Front - (1) - RR1418FK
Rear - (1) - RR1419FK
Car Set - (1) - RR1420FK
Return to TR6 Index Page 
Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.