|
|
|
Triumph TR6 Suspension Kits |
|
Page Contents
Spax Adjustable Shock Absorber Kits
Koni Adjustable Shock Absorber Kits
Polyurethane Anti-Roll Bar Bush Kits
Polyurethane Steering Rack Mounts
Polyurethane Suspension Bushes
Suspension Bush Kits - Polyurethane Suspension Bolt Kits Individual Bushes ©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Standard Shock Absorber Kits
Spax Adjustable Shock Absorber Kits
Koni Adjustable Shock Absorber Kits
Spring Kits
Uprated Front Anti-Roll Bar
Polyurethane Anti-Roll Bar Bush Kits
Rear Anti-Roll Bar
Polyurethane Steering Rack Mounts
Solid Steering Rack Mounts
Quick Racks
Polyurethane Suspension Bushes
Front - Telescopic, Rear - Lever (reconditioned exchange).
Kit 1 - (1) - RR1405
Includes 2 front and 2 rear standard shock absorbers.
Kit 2 - (1) - RR1407
Includes 2 front & 2 rear standard shock absorbers, 4 standard springs & 8 spring insulators.
Kit 3 - (1) - RR1410
Includes 2 front & 2 rear standard shock absorbers, 4 uprated/lowered springs (front 420lb/1" lowered - rear 420lb/3/4" lowered) & 8 spring insulators.
Front - Telescopic, Rear - Telescopic, Type 1 Brackets.
Kit 1 - (1) - RR1300
Includes 2 front & 2 rear Spax shock absorbers.
Kit 2 - (1) - RR1408
Includes 2 front & 2 rear Spax shock absorbers, 4 standard springs & 8 spring insulators.
Kit 3 - (1) - RR1411
Includes 2 front & 2 rear Spax shock absorbers, 4 uprated/lowered springs (front 420lb/1" lowered - rear 420lb/3/4" lowered) & 8 spring insulators.
Front - Telescopic, Rear - Telescopic, Type 1 Brackets
Kit 1 - (1) - RR1406
Includes 2 front & 2 rear Koni shock absorbers.
Kit 2 - (1) - RR1409
Includes 2 front & 2 rear Koni shock absorbers, 4 standard springs & 8 spring insulators.
Kit 3 - (1) - RR1412
Includes 2 front & 2 rear Koni shock absorbers, 4 uprated/lowered springs (front 420lb/1" lowered - rear 420lb/3/4" lowered) & 8 spring insulators.
Standard Kit - (1) - RR1413
Includes 4 standard springs & 8 insulators.
Uprated Kit - (1) - RR1414
Includes 4 uprated/lowered springs & 8 insulators.
We offer an uprated version with a larger diameter (0.875" as opposed to 0.75" standard) which reduces the amount of body roll when cornering. To install you will require the fitting kit which includes larger diameter bushes clamps, and bolts listed below.
1. Front Anti-Roll Bar Only (0.875" diameter) - (1) - 215647UR
2. FITTING KIT (uprated anti-roll bar) - (1) - 215647URFK
Kit includes the following parts (shown in red) :-
3. Polyurethane Bush (anti-roll bar) - (2) - 123998POLYTR
4. Bracket (clamp, anti-roll bar) - (2) - 155308
5. 'U' Bolt (plain, anti-roll bar bracket) - (2) - 155307
6. Washer (plain) - (4) - GHF301
7. Nut (nyloc) - (4) - GHF222
8. Polyurethane Bush Kit (front anti-roll bar);
Includes 2 mounting and 4 end link bushes.
Standard (0.078" diameter) - (1) - RR1416
Uprated (0.875" diameter) - (1) - RR1417
The TR6 was never fitted with a rear anti-roll bar so this bar once fitted, improves the rear end stability considerably allowing a progressive induction of pressure.
9. Rear Anti-Roll Bar Kit - (1) - RR1415
As an alternative to solid rack mounts these polyurethane mounts offer increased strength and a more responsive feel than the original rubber. These should be used with standard rack mounting clamps and plates.
10. Polyurethane Bush (steering rack) - (2) - 139386POLY
11. Clamp Bracket - (2) - 156024
12. Support Plate - (2) - 133875
13. Washer (plain) - (4) - GHF301
14. Nut (nyloc) - (4) - GHF222
The solid steering rack mount kit is designed to retain the steering rack and prevent movement when in use. The standard rubber mounts allow movement even when correctly clamped. These aluminium mountings retain the rack giving more responsive steering and greater control. Supplied as a kit with 'U' bolts ready to install. Only suitable for cars with original steering racks. (Not suitable for 'Quick Racks'!)
15. Solid Steering Rack Mount Kit - (1) - RR1370
The new Quick Rack has a high ratio pinion giving you lock-to-lock in only 2.5 turns, compared to the standard of 3.5 turns. Made for competition use, with stronger outer casing and a higher grade of steel rack for increased durability. The rack is designed to be used with special solid rack mounts, (included in fitting kit). Track rod ends not included.
16. Quick Rack Assembly (RH steering) - (1) - 306829HR
Quick Rack Assembly (LH steering) - (1) - 306830HR
17. Fitting Kit - (1) - RR1421
Polyurethane bushes give improved suspension location with greater wear resistance compared to their rubber equivalents. This makes these bushes ideally suited to road cars. A worthwhile addition to any car, the polyurethane bushes are supplied with a steel sleeve where necessary. They are available individually or as kits.
Front - (1) - RR1418POLY
Includes bushes for :-
Upper Wishbone x 4 (each 2 replaces 2 original bushes), Lower Inner Wishbone x 4, Anti-Roll Bar Mounting x 2, Anti-Roll Bar End Link x 4, Front Damper Upper x 4, Front Damper Lower x 4, Steering Rack Mounting x 2.
Rear - (1) - RR1419POLY
Includes bushes for :-
Trailing Arm x 4, Rear Axle Front Mounting Cone/Cup x 4, Rear Damper (Lever) Link x 4.
Car Set - (1) - RR1420POLY
Include front and rear bush kits as listed above.
These kits include all necessary bolts, nuts and washers to install poly bush kits listed above (N.B. excludes special washers which are assumed to be re-used).
Front - (1) - RR1418FK
Rear - (1) - RR1419FK
Car Set - (1) - RR1420FK
18. Polyurethane Bush (upper wishbone) - (4) - 102228POLY
Each replaces 2 original bushes.
19. Polyurethane Bush (lower inner wishbone) - (4) - 141481POLY
20. Polyurethane Bush (rear trailing arm) - (4) - 137599POLY
21. Polyurethane Bush (front anti-roll bar) - (2) - 123998POLY
Standard 0.75" diameter bar.
Polyurethane Bush (anti-roll bar) - (2) - 155310POLY
Uprated 0.875" diameter bar.
22. Polyurethane Bush (anti-roll bar end link) - (4) - 517985POLY
23. Polyurethane Bush (front damper, upper) - (4) - 152588POLY
24. Polyurethane Bush (front damper, lower) - (2) - 119450POLY
25. Polyurethane Bush (cone, rear axle mount, front) - (2) - 134235POLY
26. Polyurethane Bush (cup, rear axle mount, front) - (2) - 134236POLY
27. Polyurethane Bush (rear shock link) - (4) - 152588POLY
28. Polyurethane Spring Seat (front) - (4) - 100751POLY
29. Polyurethane Spring Seat (rear) - (4) - 138823POLY
Return to TR6 Index Page 
Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.