|
|
|
Triumph TR6 Dash & Sunvisors |
|
Page Contents
European models North American models.
©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Fascia Panel (Metal)
Wood Veneer Dash Panel
Dash Panel Fittings
Cubby Box & Fittings
Air Louvres
Crash Pads
Centre Console
Matching Lock Sets
Interior Mirror
Sun Visors
Consumables
1. 
Fascia Panel Assembly (RH steering) - (1) - 910060
CP models.
Fascia Panel Assembly (RH steering) - (1) - 918203
CR models.
Fascia Panel Assembly (LH steering) - (1) - 907669
CP/CC models.
Fascia Panel Assembly (LH steering) - (1) - 918204
CR/CF models.
2. Nut (metal fascia to scuttle rail) - (5) - HN2007
3. Washer (locking) - (5) - WL207
4. Washer (plain) - (5) - WP7
5. Screw (metal fascia to 'A' post tops) - (2) - HU706
6. Washer (locking) - (2) - WL207
We supply both teak and walnut veneer dash panels (see photo). These dash panels also include the glovebox lid. Each part no. has a 'teak' or 'walnut' suffix to determine its condition. Also please check your commission no. to ensure the correct type of dash panel is selected.
7. Wood Dash Panel (RH steering);
To CP75000.
Teak - (1) - 907709TEAK
Walnut - (1) - 907709WALNUT
Wood Dash Panel (RH steering);
With separate switches for windscreen wipers and washer.
CP75001 to CR1.
Teak - (1) - 910057TEAK
Walnut - (1) - 910057WALNUT
Wood Dash Panel (RH steering);
With round hazard switch aperture and single switch for windscreen wipers and washer.
From CR1.
Teak - (1) - 917647TEAK
Walnut - (1) - 917647WALNUT
Wood Dash Panel (LH steering);
To CP75000.
Teak - (1) - 907710TEAK
Walnut - (1) - 907710WALNUT
Wood Dash Panel (LH steering);
With hazard switch aperture measuring 15/16" x 1 1/8".
CP75001 to CR1.
Teak - (1) - 910058TEAK
Walnut - (1) - 910058WALNUT
Wood Dash Panel (LH steering);
With round hazard switch aperture and single switch for windscreen wipers and washer.
From CR1.
Teak - (1) - 917648TEAK
Walnut - (1) - 917648WALNUT
Wood Dash Panel (LH steering);
To CC75000.
Teak - (1) - 907710TEAK
Walnut - (1) - 907710WALNUT
Wood Dash Panel (LH steering);
With hazard switch aperture measuring 15/16" x 1 5/8".
From CC75001 to late 1972.
Teak - (1) - 910058TEAK
Walnut - (1) - 910058WALNUT
Wood Dash Panel (LH steering);
With one warning lamp aperture under instrument cluster for seat belt warning lamp.
From late 1972 to CF1.
Teak - (1) - 910059TEAK
Walnut - (1) - 910059WALNUT
Wood Dash Panel (LH steering);
With 2 warning lamp aperture under instrument cluster for seat belt warning lamp and brake failure warning lamp.
CF1 to CF35000.
Teak - (1) - 917550TEAK
Walnut - (1) - 917550WALNUT
Wood Dash Panel (LH steering);
With 3 warning lamp apertures under instrument cluster for seat belt warning lamp and EGR warning lamp.
From CF35001.
Teak - (1) - WKC2511TEAK
Walnut - (1) - WKC2511WALNUT
8. Hinge Kit (chromed hinges and screws) - (1) - RR1462C
Early TR6.
Hinge Kit (black hinges and screws) - (1) - RR1462B
Late TR6.
9. Hinge (glove box lid, chromed) - (2) - 611565
Early TR6.
Hinge (glove box lid, black) - (2) - 625806
Late TR6.
10. Screw (hinge to lid and fascia) - (10) - 511669
Early TR6.
Screw (hinge to lid and fascia) - (10) - 517771
Late TR6.
11. Screw (hinge to lid and fascia) - (4) - 511668
12. Check Link Assembly (metal) - (1) - 609745
To CC/CP75000.
Check Link Assembly (plastic) - (1) - 630972
CP/CC75001 to CR/CF1.
Check Link Assembly (metal) - (1) - 609745
CR/CF1 to CR5000/CF12500.
Check Link Assembly (plastic) - (1) - CZA7135
From CR5001/CF12501.
13. Screw (link to lid) - (2) - 511670
14. Screw (link to fascia) - (2) - 510995
15. Bracket (buffer, cubby box lid) - (1) - 621695
16. Buffer (rubber) - (1) - 613863
17. Screw (wood, bracket to dash) - (2) - TW402
18. Lock Assembly (cubby box, chrome) - (1) - 611584
To CC/CP75000.
Lock Assembly (cubby box, black) - (1) - 631404
From CP/CC75001.
19. Pull (finger, cubby box lock) - (1) - 609463
Optional fitment.
20. Bracket (striker, cubby box lock) - (1) - 616275
21. Screw (self tapping, bracket to fascia) - (2) - YZ3303
22. Fitting Kit (dash, chrome screws & cup washers) - (1) - RR1463C
Fitting Kit (dash, black screws & cup washers) - (1) - RR1463B
Late TR6.
23. Screw (self tapping, chrome) - (5) - 511671
Early TR6.
24. Washer (cup, chrome) - (5) - CD24153
Early TR6.
23. Screw (self tapping, black) - (5) - 517710
Late TR6.
24. Washer (cup, black) - (5) - 517711
Late TR6.
25. Plate 9retaining wiper switch) - (1) - 621827
To CR/CF1.
26. Screw (plate to dash) - (2) - TW402
To CR1/CF1.
27. Plate (retaining light switch) - (1) - 622222
From CR/CF1.
28. Screw (plate to dash) - (2) - TW402
From CR/CF1.
29. Bracket (mounting panel light switch) - (1) - 621794
To CR/CF1.
Bracket (mounting panel light switch) - (1) - 630535
From CR/CF1.
30. Screw (bracket to dash) - (2) - TW402
31. Bracket (mounting hazard lamp switch) - (1) - 622280
To CC/CP75000.
Bracket (mounting hazard lamp switch) - (1) - 622230
From CP/CC75001.
32. Screw (bracket to dash) - (2) - TW402
33. Lever (vent lid operating) - (1) - 616333
Early TR6.
Lever (vent lid operating) - (1) - 626687
Late TR6.
34. Knob (vent lid operating lever) - (1) - 601678
35. Screw (knob to lever) - (1) - AB604021
36. Rivet (pivot to fascia) - (1) - RR606
37. Retainer ('Truarc', pivotal rivet to fascia) - (1) - FX3203
38. Washer (double coil, lever to fascia) - (1) - WD157
39. Channel (support, fascia to dash) - (1) - 610592
40. Screw (support channel to dash) - (1) - HU704
41. Washer (locking) - (1) - WL207
42. washer (plain) - (1) - WP23
43. Screw (support channel to fascia) - (2) - PX504
44. Washer (locking) - (2) - WL205
45. Washer (plain) - (2) - WP5
46. Cubby Box Assembly (RH steering) - (1) - 815746
Original fibre board.
Cubby Box Assembly (LH steering) - (1) - 815747
Original fibre board.
Cubby Box Assembly (universal) - (1) - 815746P
Plastic alternative, fits RH/LH steering.
Original cubby boxes in TR6 cars are handed by the fact that the circular retainer for the cubby box lamp was fitted and a piercing in the fibre is made to allow the light bulb to shine through. The retainer is not fitted to the universal replacement cubby box so you can fit it as required. The retainer fits on the LH side of the cubby box on RH Steering cars and vice-versa for LH Steering cars.
47. Retainer (circular, cubby box lamp) - (1) - 623920
48. Rivet ('Pop' type) - (3) - 552522
49. Screw (self tapping) - (6) - YA303
50. Spire Nut - (6) - 514917
51. Switch (glove box lamp) - (1) - 619071
52. Buffer (rubber) - (1) - 631001
53. Bulb (glove box lamp) - (1) - GLB239
54. Bulbholder (glove box lamp) - (1) - 37H5181
55. Plaque (tyre pressure) - (1) - 625964
To CC50000.
56. Plaque (tyre pressure) - (1) - 626856
From CC50001.
The plastic fascia fresh air louvre assemblies are interchangeable. The difference between the two plastic ones is a cosmetic bright finished edge on the later type. Other models from the Triumph range (TR5, Stag, 2500) were fitted with similar (but not identical) vents to those in the TR6. The metal vents are retained in the fascia by a stud ring, clamps and nuts; the plastic vents are secured by clips on the periphery of the louvre.
57. Louvre Assembly (metal)* - (2) - 713040
58. Ring (clamping louvre to fascia)* - (2) - 620408
59. Clamp (louvre to fascia)* - (4) - 620847
60. Nut (knurled)* - (4) - 620848
61. Washer (locking)* - (4) - WQ304
* To CP/CC50000.
62. Louvre Assembly (plastic) - (2) - 720650
From CP/CC50000 to CR/CF1.
Louvre Assembly (plastic) - (2) - 725776
All CR/CF models.
63. Ring (rubber, sealing) - (2) - 629142
All CR/CF models.
64. Louvre Assembly (footwell, metal) - (2) - 713040
To CP50000.
Louvre Assembly (footwell, plastic) - (2) - 720650
From CP/CC50000 to CR/CF1.
65. Bracket Assembly (footwell louvre, RH) - (1) - 622133
Bracket Assembly (footwell louvre, LH) - (1) - 622132
66. Screw (self tapping) - (4) - YZ3404
67. Spire Nut - (4) - FF25448
68. Screw (clamping louvres in brackets) - (2) - HU506
69. Nut - (2) - HN2005
70. Washer (locking) - (2) - WL205
71. Washer (plain) - (2) - WP5
The original method of production for the waist rail trim, dashtop and crash rail padding is called foam box moulding. It isn't really suitable for mass production, especially as it involves 3 separate operations. The first is the metal press tool to produce the mounting metalwork (as in the dash crash padding). The second is the vacuum forming tool, which puts the shape and grain into the vinyl. Finally, these two components are assembled into a box which aligns the skin correctly relative to its metal work and expanding foam is injected between the two. Open the box and out pops the finished article, though this may need light trimming. Regrettably though this trim is nice when new, both skin and foam are easily damaged. The foam also seems to succumb to the ravages of sunlight, not that too much ravaging by sunlight occurs in the UK. The actual crash protection offered is negligible and the hardness of the foam varies considerably.
72. Crash Pad Kit (includes dash top, lower crash pads, switch plinth & door top trim pads) - (1) - RR1479
RH & LH steering to CP50000.
Crash Pad Kit (includes dash top, lower crash pads, switch plinth & door top trim pads) - (1) - RR1480
RH steering CP50001 to CR5000.
Crash Pad Kit (includes dash top, lower crash pads, switch plinth & door top trim pads) - (1) - RR1481
RH steering from CR5001.
Crash Pad Kit (includes dash top, lower crash pads, switch plinth & door top trim pads) - (1) - RR1482
LH steering CP/CC50001 to CR5000.CF12500.
Crash Pad Kit (includes dash top, lower crash pads, switch plinth & door top trim pads) - (1) - RR1483
LH steering from CR5001/CF12501.
73. Crash Pad (lower, LH) - (1) - 812081
RH steering.
LH steering to CP/CC50000.
Crash Pad (lower, LH) - (1) - 818401
LH steering from CP/CC50001.
74. Crash Pad (lower, RH) - (1) - 812091
LH steering.
RH steering to CP50000.
Crash Pad (lower, RH) - (1) - 818411
RH steering from CP50001.
75. Nut (crash pad to fascia lower) - (6) - HN2005
76. Washer (locking) - (6) - WQ305
77. Washer (pain) - (6) - WF113
78. Crash Pad (dash top, padded) - (1) - 811936
Crash Pad (dash top, padded) - (1) - 904115
Alternative, no hole for ashtray.
79. Ashtray Assembly* - (1) - 613186
80. Crash Pad (ignition switch)* - (1) - 718813
81. Clip* - (1) - 627340
82. Washer (plain)* - (1) - WP5
83. Washer (locking)* - (1) - WL205
84. Nut* - (1) - HN2005
* From CP/CC50000.
85. Switch Plinth - (1) - 811932
To CP/CC50000.
Switch Plinth - (1) - 718787
From CP/CC50001.
86. Screw (plinth reinforcement to fascia) - (1) - HU704
87. washer (locking) - (1) - WL207
88. Screw (self tapping) - (2) - 500647
89. Spire Nut - (2) - FU2584
90. Bracket (filler, dash support) - (1) - 616193
Cp/CC models.
Bracket (filler, dash support) - (1) - 625225
CR/CF models.
91. Screw (bracket to fascia) - (2) - HU806
92. Washer (plain) - (2) - WP34
93. Nut (nyloc) - (2) - YN2908
94. Screw (dash support to bracket) - (2) - HU807
95. Washer (plain, screw to dash support) - (2) - 500172
96. Washer (plain) - (2) - WP8
97. Nut (nyloc) - (2) - YN2908
98. Cap (plastic, black, covering screw head) - (2) - 623201
99. Centre Console Assembly - (1) - 815721
CP/CC models.
Centre Console Assembly - (1) - 821571
CR models.
Centre Console Assembly - (1) - 821551
CF models.
100. Moulded Cover (centre console) - (1) - 815721MC
CP/CC models.
Moulded Cover (centre console) - (1) - 821571MC
CR models.
Moulded Cover (centre console) - (1) - 821551MC
CF models.
101. Recovering Kit (black vinyl) - (1) - RR1224
Centre console.
Recovering Kit (black leather) - (1) - RR1224LEATHER
102. Screw (dash support to floor) - (4) - HU712
103. Washer (locking) - (4) - WL207
104. Washer (plain) - (4) - WP7
105. Plate (radio aperture blanking, fine grain material) - (1) - 617069
CP/CC models.
Plate (radio aperture blanking, coarse grain material) - (1) - 633891
CR/CF models.
106. Screw (blanking plate, chrome) - (2) - 512462
Screw (blanking plate, back) - (2) - RMP2312
Alternative.
107. Washer (plain) - (2) - WP31
108. Washer (locking) - (2) - WL205
109. Nut - (2) - HN2005
110. Matching Lock Set - (1) - RR1392
Includes ignition tumbler, cubby box lock, door lock set & boot lock barrel with matched pair of FS keys.
To CP/CC50000; 1969.
Matching Lock Set - (1) - RR1393
Includes chrome cubby lock, door lock set and boot lock barrel with matched pair of FS keys.
CP/CC50001 to CP/CC75000; 1970 - 1971.
Matching Lock Set - (1) - RR1394
Includes black cubby lock, door lock set and boot lock barrel with matched pair of FS keys.
From CP/CC75001; 1972 - 1976.
111. Mirror Assembly (interior, dipping type) - (1) - 632095
Includes stem, mounting kit & screws.
112. Mirror Head (less stem) - (1) - 632091
113. Mirror Stem - (1) - 632095STEM
114. Screw (mirror head to stem) - (1) - SG104161
115. Mirror Mounting Kit (3 pieces) - (1) - RTC1006
116. Screw (stem to windscreen frame) - (2) - 512461
If your TR is blessed with droopy visor syndrome there a couple of things that can be done to correct it. The screw that attaches the mounting bar to the visor bracket, (SH604041) should be located and locked in place with a liquid thread lock compound such as 'Loctite'. This is available as part number GAC100. The screw should be tightened sufficiently to allow the visor bar to pivot but not have excessive axial movement. The use of thread locking liquid or engineering adhesive is recommended to ensure the screws do not undo in service.
Sun visors often refuse to hold at an angled position to block out the bright sun and still allow a clear view of the road. The friction of the mounting bars inside the sun visor framework maintains the angular position. Too much friction and the visor gets mangled, too little and it droops. The fit of the visor outer mounting bars in the visors can be attended to in order to get the best possible use from the visors adjustable angle. If the mounting bar is too tight, probably caused by corrosion and dirt, merely remove the bar by pulling and refit it cleaned and perhaps lightly lubricated. Too loose may be caused by the bar not being located correctly in the visor frame, the frame being broken or the mounting bar being of too small a diameter for the visor's framework. This can be checked and rectified.
The sun visors fitted to the TR6 were changed in 1972 with the introduction of CR and CF models. These visors differed visually in that they were now a coarse grain to match the rest of the interior trim as opposed to the earlier fine grain style. Listed below are sun visors by application for history's sake but the reality is that all are completely interchangeable. Your choice:-
117. Sun Visor (driver's, black) - (1) - 812711
RH steering, CP models.
118. Sun Visor (passenger's, black, with mirror) - (1) - 812741
RH steering, CP models.
Sun Visor (driver's, black) - (1) - 812711
LH steering, CP/CC models.
Sun Visor (passenger's, black, with mirror) - (1) - 812751
LH steering, CP/CC models.
Sun Visor (driver's, black) - (1) - 823421
RH steering, CR models.
Sun Visor (passenger's black, with mirror) - (1) - 823461
RH steering, CR models.
Sun Visor (driver's, black) - (1) - 823421
LH steering, CR/CF models.
Sun Visor (passenger's, black, with mirror) - (1) - 823471
LH steering, CR/CF models.
119. Mounting Kit (for 1 pair of visors) - (1) - RR1461
Kit includes items 120-134 :-
120. Sun Visor Bar (inner) - (2) - 812760
121. Sun Visor Bar (LH outer) - (1) - 812761
122. Sun Visor Bar (RH outer) - (1) - 812762
123. Sun Visor Mount Bracket (LH) - (1) - 812684
124. Sun Visor Mount Bracket (RH) - (1) - 812685
125. Screw (pivot bar to bracket) - (2) - SH604041
126. Washer (plain) - (2) - WP144
127. Washer (plain) - (2) - WP7
128. Retainer (sun visor, rubber) - (2) - 622431
129. Screw (retainer to frame) - (4) - 511384
130. Washer (plain) - (4) - WP3
131. Screw (bracket to frame) - (2) - AD608084
132. Nut (spire, in frame) - (2) - 570145
133. Screw (bracket to frame) - (4) - 512156
134. Nut (fix, in frame) - (4) - FC2803
135. WD40 (400ml can) - (ar) - GAC111
136. Studloc (Loctite, 10ml) - (ar) - GAC100
137. Grease (anti-seize, 85gm) - (ar) - RX1345
138. Interior Shampoo (AutoGlym, 500ml) - (ar) - RX1314
139. Vinyl/Rubber Care (AutoGlym, 325ml) - (ar) - RX1319
Return to TR6 Interior Trim Index 
Return to TR6 Index Page
Home
About Rimmer Bros.
Prices
General Info
Delivery
How to Order
Your Order Form
News
Restoration Projects
Picture Library
Triumph Links
Free Catalogue
Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.