|
|
|
Triumph TR6 Trim Panels & Kits (CP/CC) |
|
Page Contents
1969 Models to CP/CC50000 1970 - 72 Models CP/CC50000 up to CR/CF1
©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Trim Identification
Trim Panels & Kits
Trim Panel Fittings
Door Pulls
Draught Excluder
Console Panels
Consumables
The TR6 used basically two different grain vinyl materials throughout its production. These are best described as fine and coarse. Broadly speaking the grain pattern started production with fine and went to coarse in 1973 when CR/CF models were introduced. Numerous terms and descriptions have been used to describe the two grain patterns, so here goes with the glossary:
Fine = Early = Stag = SAS = Smooth
Coarse = Late = Bubble = Long Horn = Elephant Hide = 1290 grain
There are two distinct styles used in the welded face pattern of the liners. This pattern changing at CP50001. Another change happened to the door liners at CR12501 when the door closing pull was relocated from the padded door top to the centre of the door liner. This is was a change that gave a more durable door pull closing method than the sculptured padded door top that had been used earlier.
Up to CP50000 the door liners and rear quarter liners had 4 horizontal welded lines and the rear cockpit liner had vertical welded lines.
From CP50001 to CR12500 the door, rear quarter and rear cockpit liners had 2 horizontal welded lines.
From CR12501 the liners had the same welded pattern as those previously, the door liners however were pierced centrally with an oblong hole to accommodate the door pull handle and pocket.
We do not list individual components of NON-BLACK trim kits. This is due to specification changes in modern materials which render it almost impossible to guarantee either colour or grain match with O.E. panels. If, however an individual panel is needed, it may be possible to specially order it (pre-paid) on the understanding that it will only match what we currently supply. The required item may have to be purchased as part of a pair.
Interior trim kits (and seat covers / carpets) are also available in special colours (e.g. biscuit or mid-blue) to pre-paid order.
We also offer leather faced interior trim panel kits which are ideal if you are fitting leather seat covers with perhaps a luxury wool carpet set.
Trim Kit Contents
Trim kits include the following items constructed in a similar manner to the original from matched colour grained vinyls :-
• One pair of Door Liners.
• One pair of Rear Quarter Liners.
• One pair of Rear Wheel Arch Covers with foam support backings.
• Two Pieces of Vinyl material to cover the inside face of the 'B' post.
• Two vinyl covered triangular 'B' Post Gusset Liners.
• One Rear Cockpit Liner.
Trim Kit (fine grain vinyl);
Black - (1) - RR1205BLACK
Red - (1) - RR1205RED
Shadow Blue - (1) - RR1205S-BLUE
Light Tan - (1) - RR1205L-TAN
Trim Kit (leather);
Black - (1) - RR1205BLACKLEATH
Red - (1) - RR1205REDLEATHER
Shadow Blue - (1) - RR1205S-BLUELEAT
Light Tan - (1) - RR1205L-TANLEATH
1. Door Liners (black, pair) - (1) - RR1488
2. 'B' Post Gusset (black) - (2) - 621881
3. Rear Cockpit Liner (black) - (1) - 813051
4. Quarter Panels (black, pair) - (1) - RR1489
5. Wheel Arch Covers (black, pair) - (1) - RR1490
6. Foam Pad (wheel arch covers) - (2) - 806245
7. Strip (edge of door post, black, LH) - (1) - 713171
8. Strip (edge of door post, black, RH) - (1) - 713181
Trim Kit (fine grain vinyl);
Black - (1) - RR1041BLACK
Red - (1) - RR1041RED
Shadow Blue - (1) - RR1041S-BLUE
Light Tan - (1) - RR1041L-TAN
New Tan - (1) - RR1041N-TAN
Trim Kit (leather);
Black - (1) - RR1205BLACKLEATH
Red - (1) - RR1205REDLEATHER
Shadow Blue - (1) - RR1205S-BLUELEAT
Light Tan - (1) - RR1205L-TANLEATH
New Tan - (1) - RR1041N-TANLEATH
9. Door Liners (black, pair) - (1) - RR1044
10. 'B' Post Gusset (black) - (2) - 621881
11. Rear Cockpit Liner (black) - (1) - 819731
12. Quarter Panels (black, pair) - (1) - RR1048
13. Wheel Arch Covers (black, pair) - (1) - RR1490
14. Foam Pad (wheel arch covers) - (2) - 806245
15. Strip (edge of door post, black, LH) - (1) - 713171
16. Strip (edge of door post, black, RH) - (1) - 713181
17. Trim Fitting Kit - (1) - RR1214
Kit includes items 18-32 :-
18. Screw (self tapping, door liner pocket) - (4) - YZ3426
19. Cup Washer (clawed) - (4) - 608586
20. Clip (spring, liner to door) - (30) - 608511
21. Retainer Clip (plastic, for 605811) - (30) - 613769
22. Screw (self tapping, rear quarter liner) - (6) - 507819
23. Washer (cup) - (6) - CD24152
24. Clip (spring, rear quarter liner) - (6) - 608511
25. Body Stud (snap, black) - (2) - 713511
26. Washer (spacing) - (2) - 512611
27. Screw (self tapping, stud and washer) - (2) - YZ3105
28. Screw (self tapping, rear cockpit liner) - (7) - 507819
29. Washer (cup) - (7) - CD24152
30. Body Stud (snap, black) - (4) - 713511
31. Washer (spacing) - (4) - 512611
32. Screw (self tapping, stud and washer) - (4) - YZ3105
33. Cap (door liner screw);
Use appropriate coloured cap to match trim.
Black - (4) - 621991
Matador Red - (4) - 621992
Light Tan - (4) - 621993
Shadow Blue - (4) - 621997
New Tan - (4) - 630091
34. Door Pull (black, LH) - (1) - 812311
35. Door Pull (black, RH) - (1) - 812321
The door top pull (waist rail) finisher assemblies originally planned for the TR model were coloured to match the interior trim colour of the car. This was not incorporated in the production TR. The foam filled and shaped door top pulls were only fitted to models up to CR/CF12501. After this the door pull was incorporated as a pocket in the face of the door liner panel; and the door top finisher was reduced to being a simple black vacuum formed vinyl covering.
The original method of production for the waist rail trim, dashtop and crash rail padding is called foam box moulding. It isn't really suitable for mass production, especially as it involves 3 separate operations. The first is the metal press tool to produce the mounting metalwork (as in the crash padding). The second is the vacuum forming tool, which puts the shape and grain into the vinyl. Finally, these two components are assembled into a box which aligns the skin correctly relative to its metal work and expanding foam is injected between the two. Open the box and out pops the finished article, though this may need light trimming. Regrettably though this trim is nice when new, both skin and foam are easily damaged. The foam also seems to succumb to the ravages of sunlight, not that too much ravaging by sunlight occurs in the UK. The actual crash protection offered is negligible and the hardness of the foam varies considerably.
36. Door Draught Excluder;
Black - (2) - RX3000BLACK
Shadow Blue - (2) - RX3000BLUESHAD
37. 'B' Post Capping (LH) - (1) - 622747
38. 'B' Post Capping (RH) - (1) - 622748
39. Screw - (2) - YA323
40. Body Stud (snap, black) - (2) - 713511
41. Rivet (securing stud) - (2) - 713531
42. Console Panel (LH);
Black Fine Grain Vinyl -
Without hole - (1) - 815921
With hole - (1) - XKC371S
Black Leather -
Without hole - (1) - 822251LEATHER
With hole - (1) - XKC371LEATHER
43. Console Panel (RH);
Black Fine Grain Vinyl -
Without hole - (1) - 815931
With hole - (1) - XKC351S
Black Leather -
Without hole - (1) - 822261LEATHER
With hole - (1) - XKC351LEATHER
44. Screw(self tapping, panel to bracket) - (2) - YJ2464
45. Cup Washer - (2) - 619627
46. Spire Nut - (2) - FJ2443
47. Bracket (spire nut to tunnel) - (2) - 625688
48. Rivet ('Pop' type, bracket to tunnel) - (4) - 564998
49. Stay Bar (speaker support) - (1) - ZKC401
50. Screw (self tapping, panel to stay bar) - (2) - 519651
51. Cup Washer - (2) - 625549
52. Spire Nut - (2) - FJ2465
53. Buffer (rubber, stay bar to heater box) - (1) - 616233
54. Speaker (round) - (2) - YKC541
55. Grille (speaker) - (2) - ZKC412
56. Screw (speaker and grille attaching) - (8) - 514776
57. Washer (plain) - (8) - WP124
58. Washer (locking) - (8) - WQ305
59. Nut - (8) - HN2005
60. Trim Adhesive (1 litre) - (ar) - RX1353
61. Trim Adhesive (aerosol, 370g) - (ar) - RX1353AEROSOL
62. Interior Shampoo (AutoGlym, 500ml) - (ar) - RX1314
63. Vinyl/Rubber Care (AutoGlym, 500ml) - (ar) - RX1319
Return to TR6 Interior Trim Index 
Return to TR6 Index Page
Home
About Rimmer Bros.
Prices
General Info
Delivery
How to Order
Your Order Form
News
Restoration Projects
Picture Library
Triumph Links
Free Catalogue
Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.