Triumph TR6 Seat Covers and Fittings - 1973-76 UK and USA CR1 and CF1 on

Order your Triumph TR6 Seat Covers and Fittings - 1973-76 UK and USA CR1 and CF1 on ⛽ Low prices and fast, worldwide delivery ✈ British car experts ♚ Call ☎ 01522 568000 or ☎ 1-855-746-2767
Part No.: GRID600350

Prices displayed in:
1
Includes headrest covers.

1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049BLACK
In stock
Most express orders ship today!
£425.00 ex VAT£510.00 inc UK VAT
Quantity
1
Includes head rest covers
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049CHESTNUT
In stock
Most express orders ship today!
£425.00 ex VAT£510.00 inc UK VAT
Quantity
1
Includes head rest covers
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049LTAN
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£425.00 ex VAT£510.00 inc UK VAT
Quantity
1
Includes head rest covers
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.

All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.

Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.

As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?

Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.

The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.

IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049NTAN
In stock
Most express orders ship today!
£425.00 ex VAT£510.00 inc UK VAT
Quantity
1
Includes head rest covers
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049SBLUE
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£425.00 ex VAT£510.00 inc UK VAT
Quantity
1
Includes head rest covers
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049BEIGE
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£425.00 ex VAT£510.00 inc UK VAT
Quantity
1
Includes head rest covers
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049BISCUIT
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£425.00 ex VAT£510.00 inc UK VAT
Quantity
1
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049BLACKLEATH
In stock
Most express orders ship today!
£870.00 ex VAT£1,044.00 inc UK VAT
Quantity
1
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049CHESTNUTLE
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£870.00 ex VAT£1,044.00 inc UK VAT
Quantity
1
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049NTANLEATH
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£880.00 ex VAT£1,056.00 inc UK VAT
Quantity
1
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049SBLUELEAT
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£870.00 ex VAT£1,044.00 inc UK VAT
Quantity
1
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049BEIGELEATH
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£870.00 ex VAT£1,044.00 inc UK VAT
Quantity
1
1973-76 UK & USA Models CR1 & CF1 on
Reclining seat, coarse grain vinyl material with optional stalk-type head rest (adjustable)

Colour disclaimer: Colours will vary between batches, images act a visual guide only. Colours will appear different in different lighting conditions.

Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK &?USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.


All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.


Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.


As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?


Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.


The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.


IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.
Qty Req-1
Rate and Review this Product
RR1049BISCUITLEATH
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£870.00 ex VAT£1,044.00 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
917951
In stock
Most express orders ship today!
£77.00 ex VAT£92.40 inc UK VAT
Quantity
Rate and Review this Product
917953
In stock
Most express orders ship today!
£77.00 ex VAT£92.40 inc UK VAT
Quantity
Rate and Review this Product
922703
In stock
Most express orders ship today!
£77.00 ex VAT£92.40 inc UK VAT
Quantity
Rate and Review this Product
917957
In stock
Most express orders ship today!
£77.00 ex VAT£92.40 inc UK VAT
Quantity
Rate and Review this Product
917954
In stock
Most express orders ship today!
£77.00 ex VAT£92.40 inc UK VAT
Quantity
Rate and Review this Product
RR1545B
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£77.00 ex VAT£92.40 inc UK VAT
Quantity
Rate and Review this Product
RR1545BL
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£97.00 ex VAT£116.40 inc UK VAT
Quantity
Rate and Review this Product
917951COVER
In stock
Most express orders ship today!
£44.50 ex VAT£53.40 inc UK VAT
Quantity
Rate and Review this Product
917953COVER
In stock
Most express orders ship today!
£44.50 ex VAT£53.40 inc UK VAT
Quantity
Rate and Review this Product
922703COVER
In stock
Most express orders ship today!
£44.50 ex VAT£53.40 inc UK VAT
Quantity
Rate and Review this Product
917954COVER
In stock
Most express orders ship today!
£44.50 ex VAT£53.40 inc UK VAT
Quantity
Rate and Review this Product
RR1545BCOVER
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£68.00 ex VAT£81.60 inc UK VAT
Quantity
Rate and Review this Product
RR1545BLCOVER
Usually in stock at our supplier, allow 6 to 8 weeks for delivery
£118.00 ex VAT£141.60 inc UK VAT
Quantity
Rate and Review this Product
RS1754
In stock
Most express orders ship today!
£54.00 ex VAT£64.80 inc UK VAT
Quantity
4
The top of each seat squab has an eyelet inserted to allow fitment of a head rest. When the head rest is not fitted the hole is blanked off using the black plastic plug.
Qty Req-a/r
Rate and Review this Product
BD36610
In stock
Most express orders ship today!
£2.40 ex VAT£2.88 inc UK VAT
Quantity
5
Fitted to seat back cover for headrest attachment.
Headrest Bezel and Washer finished in Nickel Plate
Qty Req-2
Rate and Review this Product
CZA4500
In stock
Most express orders ship today!
£3.35 ex VAT£4.02 inc UK VAT
Quantity
Fitted to seat back cover for headrest attachment. Save money on buying a kit as items purchased individually costs more than the kit.
Qty Req-2
Rate and Review this Product
CZA4500S
In stock
Most express orders ship today!
£4.25 ex VAT£5.10 inc UK VAT
Quantity
6
Fitted to seat back cover for headrest attachment.
Headrest Bezel and Washer finished in Nickel Plate.
Qty Req-2
Rate and Review this Product
CZA4263
In stock
Most express orders ship today!
£1.15 ex VAT£1.38 inc UK VAT
Quantity
7
The head rest is held up in place by a friction roller system that is secured in a welded section at the top of the seat back frame. Two types of friction roller system were used, they are not inerchangeable as they fit different sized welded brackets on the seats.
Qty Req-2
Rate and Review this Product
CZA4713
No longer available
8
The head rest is held up in place by a friction roller system that is secured in a welded section at the top of the seat back frame. Two types of friction roller system were used, they are not inerchangeable as they fit different sized welded brackets on the seats.
Qty Req-2
Rate and Review this Product
ZKC1271
No longer available
9
Includes Seat Base and Seat Back foams and headrest foams
Qty Req-1
Rate and Review this Product
RR1221
In stock
Most express orders ship today!
£320.00 ex VAT£384.00 inc UK VAT
Quantity
11
Please Note: The spreaders that are noted on the tin as included with the adhesive are supplied separately (Part number RX1353SPREADER).

Restricted Item

Due to the hazardous nature of this item, it cannot be exported.

We can ONLY ship via UPS Carrier to England, Scotland & Wales, mainland destinations only - NO ISLANDS. )

This item CANNOT be sent by air or via the Royal Mail.

A Minimum Carriage Charge of £7.95 will apply.
Qty Req-a/r
Only Available for Delivery by UPS to Mainland United Kingdom Destinations
Rate and Review this Product
RX1353
In stock
Most express orders ship today!
£20.25 ex VAT£24.30 inc UK VAT
Quantity
Rate and Review this Product
RX1353SPREADER
In stock
Most express orders ship today!
£0.83 ex VAT£1.00 inc UK VAT
Quantity
11
This is a CFC free, multipurpose sprayable adhesive with low odour, developed to bond to a wide variety of substrates. It has excellent grab, good heat resistance and a long open time.

Trim Spray will bond:
  • Wood
  • Metals
  • Rubber
  • Fabric
  • Most Plastics
  • Cardboard
  • Polythene
  • Concrete
  • As well as decorative laminates
This makes the adhesive highly suitable for trimming in most types of vehicles. It can also be used to bond expanded polystyrene when forming a bond to a different substrate, in this instance the product should be used as a one way stick and only applied to the opposite substrate (do not spray onto the expanded polystyrene).

It is ideal for permanent bonds that require good initial bond strength. It provides good temperature resistance and if protected from contamination has an open time of several hours.

Restricted Item

Due to the hazardous nature of this item, it cannot be exported.

We can ONLY ship via UPS Carrier to England, Scotland & Wales, mainland destinations only - NO ISLANDS. )

This item CANNOT be sent by air or via the Royal Mail.

A Minimum Carriage Charge of £7.95 will apply.
Qty Req-a/r
Only Available for Delivery by UPS to Mainland United Kingdom Destinations
Rate and Review this Product
RX1353A
In stock
Most express orders ship today!
£8.15 ex VAT£9.78 inc UK VAT
Quantity
15
Per seat.
The rubber strap is supplied as a continuous strip which must
be cut to length and fitted with the supplied securing hooks.
Qty Req-2
Rate and Review this Product
RR1502
In stock
Most express orders ship today!
£48.50 ex VAT£58.20 inc UK VAT
Quantity
16
Included in webbing kit RR1502.
Qty Req-24
Rate and Review this Product
621340
This part has been superseded
Use RR1502
16
Per seat.
The rubber strap is supplied as a continuous strip which must
be cut to length and fitted with the supplied securing hooks.
Qty Req-2
Rate and Review this Product
RR1502
In stock
Most express orders ship today!
£48.50 ex VAT£58.20 inc UK VAT
Quantity
5 out of 5 starsRead 2 Review(s)Rate and Review this Product
612251
In stock
Most express orders ship today!
£19.10 ex VAT£22.92 inc UK VAT
Quantity
Rate and Review this Product
612261
In stock
Most express orders ship today!
£0.49 ex VAT£0.59 inc UK VAT
Quantity
22
D' type edge clip for 1.2 - 3.4mm material thicknesses.
Qty Req-38, Item Info 2-cover to frame
Rate and Review this Product
608817
In stock
Most express orders ship today!
£0.44 ex VAT£0.53 inc UK VAT
Quantity
Rate and Review this Product
RB5208
Out of stock, expected soon. Add to cart and Back Order
£0.52 ex VAT£0.62 inc UK VAT
Quantity
Rate and Review this Product
WP4
In stock
Most express orders ship today!
£0.24 ex VAT£0.29 inc UK VAT
Quantity
Rate and Review this Product
621776
In stock
Most express orders ship today!
£0.73 ex VAT£0.88 inc UK VAT
Quantity
Rate and Review this Product
WC701121
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Rate and Review this Product
WL700081
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Rate and Review this Product
WP5
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Rate and Review this Product
717105
In stock
Most express orders ship today!
£9.35 ex VAT£11.22 inc UK VAT
Quantity
Rate and Review this Product
WL105001
In stock
Most express orders ship today!
£0.26 ex VAT£0.31 inc UK VAT
Quantity
Rate and Review this Product
621515
In stock
Most express orders ship today!
£4.45 ex VAT£5.34 inc UK VAT
Quantity
Rate and Review this Product
WP20X
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Rate and Review this Product
GHF314
In stock
Most express orders ship today!
£0.26 ex VAT£0.31 inc UK VAT
Quantity
Rate and Review this Product
GHF314
In stock
Most express orders ship today!
£0.26 ex VAT£0.31 inc UK VAT
Quantity
46
This is a suitable replacement seat slide for both the LH & RH seats - qty required 2
Qty Req-2
Rate and Review this Product
821137
Out of stock, expected soon Aug 01, 2024. Add to cart and Back Order
£88.00 ex VAT£105.60 inc UK VAT
Quantity
Rate and Review this Product
GHF117
In stock
Most express orders ship today!
£0.38 ex VAT£0.46 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF331
In stock
Most express orders ship today!
£0.12 ex VAT£0.14 inc UK VAT
Quantity
Rate and Review this Product
GHF300
In stock
Most express orders ship today!
£0.11 ex VAT£0.13 inc UK VAT
Quantity
Rate and Review this Product
GHF101
In stock
Most express orders ship today!
£0.33 ex VAT£0.40 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF331
In stock
Most express orders ship today!
£0.12 ex VAT£0.14 inc UK VAT
Quantity
Rate and Review this Product
WC701121
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity
Rate and Review this Product
GHF300
In stock
Most express orders ship today!
£0.11 ex VAT£0.13 inc UK VAT
Quantity
Rate and Review this Product
GHF120
In stock
Most express orders ship today!
£0.38 ex VAT£0.46 inc UK VAT
Quantity
Rate and Review this Product
WD108051
In stock
Most express orders ship today!
£0.45 ex VAT£0.54 inc UK VAT
Quantity
5 out of 5 starsRead 1 Review(s)Rate and Review this Product
GHF222
In stock
Most express orders ship today!
£0.31 ex VAT£0.37 inc UK VAT
Quantity

Related Items

Spray Adhesive 500ml - RX1353A
Spray Adhesive 500ml - RX1353A
Only Available for Delivery by UPS to Mainland United Kingdom Destinations
£8.15 ex VAT£9.78 inc UK VAT
Vinyl and Rubber Care - 500ml - RX1319 - Autoglym
Vinyl and Rubber Care - 500ml - RX1319 - Autoglym
£7.65 ex VAT£9.18 inc UK VAT
Leather Care Balm - 500ml - RX1320 - Autoglym
Leather Care Balm - 500ml - RX1320 - Autoglym
£10.10 ex VAT£12.12 inc UK VAT
12 month warranty
Worldwide shipping
Price Match
Customer Comments
"I've used Rimmer Bros for years, since my first TR7s and now with my L322, Always found your stock very useful. Thanks for being there." Customer Comment
Product Description

Triumph TR6 Seat Covers and Fittings - 1973-76 UK and USA CR1 and CF1 on
Seat Identification
There are five distinctly different seat styles fitted to the Triumph TR6:
1969 UK models to CP50000 non-reclining seats (fine grain vinyl trim) without head rests.
1969 USA models to CC50000 non-reclining seats (fine grain vinyl trim) with tipping, integral type headrest.
1970 - 72 UK models from CP50001 to CP77716 reclining seats (fine grain vinyl trim) without head rests.
1970 - 72 USA models from CC50001 to CC85737 reclining seats (fine grain vinyl trim) with fixed, integral headrests.
1973 - 76 UK & USA models from CR1/CF1 onwards reclining seats (coarse grain vinyl trim) with (or with provision for) stalk-type, adjustable head rests.

All TR6 seats can be interchanged between model years and series as they all fit to the same spaced seat runners and floor panels.
Since new original style seats are not available (but see panel below for replacement Suffolk type seats), we offer a combination of seat covers, seat foams, straps and diaphragms to help restore your existing seats. Our seat covers (and foams) are supplied in vehicle sets to avoid any poor colour match with faded and worn covers.

Before ordering, please check that the seats fitted to your vehicle match the identification criteria as well as the year/chassis no. - it is possible that the seats may have been changed by a previous owner.

As an attractive alternative to the vinyl material we also offer leather faced seat covers - why not combine these with our leather trim kits and luxury wool carpet sets?

Seat covers, interior trim kits and carpets are also available in special colours (e.g. biscuit, mid blue) to pre-paid order.

The final design of TR6 seat had the provision for fitting a stalk type head rest. The head rest was not always a standard fitment, it can however be easily fitted by removal of the blanking plug (if fitted) and inserting the complete head rest assembly. The height adjustment of the head rest is maintained by a friction roller system integral with the seat. From a constructional point of view this type of seat was very simple as the squab was supported only by rubber straps, not spring wires and rubber straps.

IMPORTANT
Interior Trim Information
If you modify it - then you own it!
All our re-manufactured interior trim is produced to the highest standard. If you genuinely believe that any of our trim (seat covers/carpets etc) does not/will not fit then we will either exchange it, or offer a full refund (in line with our normal procedure). However, if any item of trim has been modified in any way whatsoever (ie cut, trimmed, unstitched, etc) by the purchaser in an attempt to rectify a problem, then any claims for faulty goods will be Null & Void.


Suffolk Seats

Review: Steve h Submitted: 24/09/2020

Overall5 out of 5 stars.
verified

Subject
Excellent, fiddly job to do but worked well this

Did this item work well with your project? What vehicle type are you using this for?
This was a seat webbing kit for my triumph tr6, the items in the kit worked well.

Review: Ray Kramer Submitted: 28/08/2020

Overall5 out of 5 stars.
verified

Subject
Part fit perfectly

Did this item work well with your project? What vehicle type are you using this for?
TR6 seats look great