|
|
|
Rover V8 Engine Fuel System (Efi) |
|
Page Contents
Inlet Manifold Fittings - Airflow Meter Efi (3.5 litre)
Inlet Manifold Fittings - Hotwire Efi (3.5, 3.9 & 4.2)
Plenum Chamber Components / Airflow Meter & Hotwire - Efi
©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Inlet Manifold Fittings - Airflow Meter Efi (3.5 litre)
Inlet Manifold Fittings - Hotwire Efi (3.5, 3.9 & 4.2)
Thermostat
Efi Upgrade Kit
Plenum Chamber Components / Airflow Meter & Hotwire - Efi
Cables
Electronic Components - Efi
All parts listed are suitable for Rover SD1 Vitesse, VDP efi and Range Rover/Discovery 3.5 efi unless otherwise stated.
Inlet Manifold - 3.5 efi - (1) - ERC9194A
SD1 Vitesse & VDP efi.
Please contact our sales department for price & availability of inlet manifolds for Range Rover efi.
Bolt - inlet manifold (all engines);
3/8" UNC x 1 1/2" - (9) - BH506121
3/8" UNC x 2" - (3) - BH506161
Washer - manifold bolt - (12) - 2204
Gasket - inlet manifold (all models);
Tin - (1) - ERC3990
Composite - (1) - ERR7306
End Seal - manifold gasket;
For Tin Gasket - (2) - AJM645
For Composite Gasket - (2) - ERR7283
Clamp - end seal - (2) - 602076
Screw - seal clamp - (2) - 602236
Auxiliary Air Valve - (1) - ERC3617A
Thermotime Switch - (1) - EAC1385A
Temperature Sensor - (1) - ETC8496A
Next to thermotime switch.
Sealing Washer (temp sensor) - (1) - 243967
Injector - (8) - ERC3620A
'O' Ring Seal - injector;
Large (upper) - (8) - EAC2414A
Small (lower) - (8) - EAC2415A
Fuel Pressure Regulator;
Standard
SD1/TR8/Range Rover - (1) - ERR268
Adjustable - (1) - EAC1284UR
Recommended for performance applications.
Increases fuel pressure, according to inlet manifold demand, by a greater ratio than standard item.
Uprated Fuel Pump Resistor - (1) - DRC3017HP
Use in conjunction with adjustable pressure regulator.
Enables fuel pump to cope with extra fuel demand.
Fuel Rail;
Right Hand - (1) - ERC3735A
Left Hand - (1) - ERC3734A
Fuel Hose (8cm length) - (2) - TKC6351
High pressure efi hose to join fuel rails.
Fuel Hose - cold start injector - (1) - ETC7241A
Also suitable for pressure regulator.
Clamp - efi hoses - (ar) - C435996L
Overrun Fuel Cut-Off Switch - (1) - ETC6143
Parts listed are suitable only for Range Rover/Discovery (plus other vehicles - such as TVR etc - fitted with Land Rover engines) equipped with hotwire efi systems, unless otherwise stated.
Inlet Manifold - 3.9 efi;
Please contact our sales department for price & availability of 3.9 hotwire inlet manifolds.
Bolt - inlet manifold (all engines);
3/8" UNC x 1 1/2" - (9) - BH506121
3/8" UNC x 2" - (3) - BH506161
Washer - manifold bolt - (12) - 2204
Gasket - inlet manifold (all models);
Tin - (1) - ERC3990
Composite - (1) - ERR7306
End Seal - manifold gasket;
For Tin Gasket - (2) - AJM645
For Composite Gasket - (2) - ERR7283
Clamp - end seal - (2) - 602076
Screw - seal clamp - (2) - 602236
Temperature Sensor - (1) - ETC8496A
Sealing Washer (temp sensor) - (1) - 243967A
Injector;
3.5 - (8) - ETC6264
3.9 & 4.2 - (8) - ERR722
'O' Ring - injector - (16) - RTC5679
Clip - injector - (8) - ETC6375
Fuel Pressure Regulator - (1) - ETC8494
3.5, 3.9 & 4.2.
Fuel Temperature Sensor - (1) - ETC6661
Front of fuel rail.
Thermostat;
Suitable for all engines.
74° - (1) - ETC4761
82° - (1) - GTS104
88° - (1) - GTS106
Gasket - thermostat;
SD1/TR8 - (1) - GTG125
Range Rover - (1) - ERR2429
Thermostat Housing;
Saloon/Sports - (1) - RB7211
Aluminium.
Range Rover
With Electric Fan Switch
Engine Nos. 341, 355, 359 only - (1) - RB7322
All Other Engines - (1) - ERC2139
With Integral Electric Fan Switch
For air con fans. Switch not included.
Air Con - (1) - ETC6135A
Non Air Con - (1) - ETC4596
Fan Switch - thermostat housing - (1) - PRC3505A
Range Rover.
Washer - fan switch - (1) - C457593A
Temperature Transmitter - (1) - GTR138
Non-Return Valve - brake servo - (1) - ETC6143
For larger capacity (4.6 litre and above). Performance engines using the original fuel injection system, considerable gains in torque and horsepower are attainable by fitting an Efi Upgrade Kit.
Kits are available for both Flap-type and Hotwire efi systems and comprise a ported and enlarged inlet manifold (inlet tracts opened out to 45mm diameter), trumpet base with enlarged (45mm diameter) intake trumpets and plenum chamber with enlarged (72mm diameter) throttle body.
These components help to remove the restriction in air flow, which can strangle your engine's power potential.
Efi Upgrade Kits are sold on an exchange basis.
Efi Upgrade Kit;
Flap-Type Efi - (1) - RB7691
Hotwire Efi - (1) - RB7692
Please contact our Sales Department for price and availability of plenum chambers.
Screw - hex key type;
Plenum chamber to Ram Housing.
Single Plenum - (6) - SS108801
Twin Plenum
Short - (4) - SS108801
Long - (2) - ETC6057A
Throttle Disc;
SD1
Single Plenum - (1) - ETC6222A
Twin Plenum - (2) - ETC6222A
Range Rover
Engine Nos. 22D & 23D - (1) - ETC5772
Low compression.
All Other Engine Nos. - (1) - ETC6222A
Throttle Spindle;
SD1
Twin Plenum
Front - (1) - ETC6013A
Rear - (1) - ETC6014A
Range Rover
Engine Nos. 22D & 23D - (1) - ETC5771
Low compression.
All Other Engines - (1) - ETC6223A
Bush - throttle spindle - (2) - 611795
Single plenum only.
Seal - throttle spindle;
Single Plenum - (2) - AUD3577
Twin Plenum - (4) - AUD3577
Idle Speed Screw;
All Engines to July 1987 - (1) - ERC7809
All Engines July 1987 on - (1) - ST606080
Throttle Potentiometer;
SD1 - (1) - ETC4483P
Range Rover
3.5 Litre - (1) - ETC5598
31D Engine Nos. only - (1) - ETC6443
3.5 litre hotwire type.
3.9 & 4.2 Litre - (1) - ETC8495A
Gasket - potentiometer - (1) - ERR4944
Cold Start Injector - (1) - EAC1383
Airflow meter type efi only.
Gasket - cold start injector - (1) - ERC3795
Idler Control Assembly - (1) - ETC6214
Range Rover.
Stepper Motor - (1) - ETC6660
Range Rover.
Gasket - stepper motor - (1) - ERR2926
Overrun Valve - (1) - ERC9786
Gasket - overrun valve - (1) - C44190
Air Valve Solenoid - (1) - ERC7536A
Air con models.
Breather Hose - (1) - ERC9116A
Flame trap to plenum.
Hose - extra air valve to plenum - (1) - ERC9117
C-shaped hose.
Non Return Valve - servo - (1) - RTC5907
Pneumatic Actuator - (1) - ETC7150
Cruise control.
Accelerator Cable
SD1 V8
1976 - 1980 - (1) - CRC481
1981 on - (1) - NAM6865
TR8 - (1) - UKC6482
Range Rover V8
Carb - RHD
4 Speed Manual - (1) - 566426
5 Speed Manual - (1) - NRC8388
Automatic - (1) - NTC3083
Carb - LHD
Manual - (1) - 577356
Automatic - (1) - NTC3084
Efi - to 1989 (VIN FA)
RHD - all models - (1) - NTC1054
LHD
3.5 - (1) - NTC4842
3.9 - (1) - NTC6723
Efi - 1990 (VIN GA) on
RHD (3.9 & 4.2) - (1) - ANR5328
LHD
3.5 - (1) - NTC7198
3.9 & 4.2 - (1) - ANR5327
Holley Carb - (1) - RB7278
Choke Cable;
SD1 V8 - early models - (1) - CRC516
TR8 - (1) - TKC6742
Range Rover V8
Stromberg Carbs
RHD - (1) - NRC9094
LHD - (1) - NRC9095
SU Carbs (rhd & lhd) - (1) - NTC3690
Holley Carb - (1) - RB7290
ECU - new
Please contact our Sales Department for availability and price of new ECUs.
ECU reconditioned/recalibrated/re-chipped
We can recondition your existing Lucas 4CU (flap-type) or 14CUX (hotwire type) ECU to original specification.
Alternatively, our fuel injection expert can recalibrate both types of ECU for more power and economy, on either standard of modified engines. For instance, re-chipping a hotwire ECU can give your 3.9 an extra 20bhp with no other modifications; driveability and cruise economy are similarly improved. Or, if you are considering a large capacity engine for your fuel injected car, a recalibrated ECU will provide the correct fuelling essential for the engine, giving you full power with no loss of fuel economy.
Please contact our Sales Department to discuss your requirements.
All ECUs are guaranteed for one year.
Diode Pack (relay) - (1) - DAC1861
Red.
Relay - fuel pump (aluminium);
Non Catalyst Vehicles - (1) - AGU1068L
Catalyst Vehicles - (1) - AFU2913L
Tune Resistor - hotwire;
Red - (1) - PRC8005
Yellow - (1) - PRC8007
White - (1) - PRC8009
Green - (1) - PRC8172
Blue - (1) - AMR2016
Airflow Meter;
Flap Type - (1) - ERC9127AR
Hotwire Type - (1) - ESR1057
Air Intake Hose;
SD1
Air Cleaner to Airflow Meter - (1) - ERC9197
Single & twin plenum.
Airflow Meter to Plenum Chamber
Single Plenum - (1) - ERC9129
Twin Plenum
Long - (1) - ETC6009A
Short - (1) - ETC6008A
Range Rover
Air Cleaner to Airflow Meter - (1) - NRC9996
Flap type only.
Airflow Meter to Plenum Chamber
Flap Type - (1) - NRC9997
Hotwire Type
To 1994 (VIN LA) - (1) - ESR1611L
1995 (VIN MA) onwards - (1) - ESR1807
Hose Clip;
Air Cleaner to Airflow Meter - (2) - RTC3518
Flap type.
Airflow Meter to Plenum Chamber - (2) - CN100908
All models.
'Y' Adaptor - air intake hose - (1) - ETC6003A
Twin plenum only.
Power Resistor - (1) - DAC1211A
Return to V8 Engine Index Page 
Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.