|
|
|
Triumph TR7 Suspension - Front |
|
Page Contents
Commission/Engine Numbers Front Mountings Rear Mountings
Suspension Leg/Spring and Strut Insert (Shock Absorber)
Front Suspension Leg Assembly ©Rimmer Bros Ltd - Registered in England No. 2155394. VAT No. GB 352 8473 40.
Front Subframe
Anti-Roll Bar
Track Arm/Stub Axle/Front Hub
Suspension Leg/Spring and Strut Insert (Shock Absorber)
Where Commission/Engine numbers are quoted in the Front Suspension Section (to help identify Factory Specification changes), they relate to the Original Components as fitted when the vehicle was new, and not subsequent replacements.
Front Subframe;
Vehicles to 1977 - RKC75
Subframe Bush Kit (Rubber mountings);
To Engine No CG431/CL20327.
Vehicles from 1977 - RKC2808
From Engine No CG432/CL20328.
See also; SUSPENSION PACKAGES-Bush & Bolt Packs.
Subframe Bolt Kit (Nuts/bolts/spacers) - (NI) -
RB7025
Standard Bushes - (NI) -
RB7061
Kit inc 2 159209, 2 UKC307 & 4 155793 bushes.
Uprated (Hard) Bushes - (NI) -
RB7061H
Kit inc 2 159209H, 2 UKC307H & 4 155793H bushes.
See also; SUSPENSION PACKAGES-Bush & Bolt Packs. Kit inc 2 bolts BH112401, 2 bolts BH112281, 4 washers UKC312, 2 spacers UKC309, 2 spacers UKC308, 4 washers UKC670, 2 spacers 159212, 2 washers 159798,2 retainers UKC310, 4 nuts NY112041.
Bolt (2) - BH112401
Washer (2) (Upper) - UKC312
Spacer (2) (Upper) - UKC309
Mounting Rubber (2) (Upper);
Standard - 155793
Washer (2) (Lower) - UKC670
Uprated (Hard) - 155793H
Spacer (2) (Lower) - 159212
Mounting Rubber (2) (Lower);
Standard - 159209
Washer (2) (Lower-Special) - 159798
Uprated (Hard) - 159209H
Nut (2) - NY112041
Bolt (2) - BH112281
Washer (2) (Upper) - UKC312
Spacer (2) (Upper) - UKC308
Mounting Rubber (2) (Upper);
Standard - 155793
Washer (2) (Lower) - UKC670
Uprated (Hard) - 155793H
Mounting Rubber (2) (Lower);
Standard - UKC307
Retainer (2) (Lower mounting) - UKC310
Uprated (Hard) - UKC307H
Nut (2) - NY112041
Anti-Roll Bar - RKC30
Anti-Roll Bar Bush Kit;
See also; SUSPENSION PACKAGES-Bush & Bolt Packs.
Anti-Roll Bar Bolt Kit - (NI) -
RB7348
Standard Bushes - (NI) -
RB7045
Kit inc 4 TKC6097 & 2 UKC210 bushes.
Uprated (Hard) Bushes - (NI) -
RB7045H
Kit inc 4 TKC6097H & 2 UKC210H bushes.
Kit includes all items marked
Front 'Anti-Dive' Kit - (NI) -
RB7100
Kit includes 2 aluminium spacer blocks, extra long bolts (& nuts). Aluminium blocks fit between subframe & anti-roll bar, to increase resistance of car front end 'diving' under heavy braking.
Mounting Bush;
Standard (2) - UKC210
Bracket (2) (Locates to subframe) - UKC3059
Uprated (Hard) (2) - UKC210H
Bolt+ (4) (Bracket to subframe) - BH110171
Washer+ (4) - WC600071
Washer+ (4) - GHF302
Nut-Locking+ (4) - GHF233
Clamp (2) - CRC1769
Bolt+ (2) - BH110111
Nut-Locking+ (2) - GHF233
Washer/Spacer (2) - WD120001
Cup Washer* (4) - UKC214
*Not inc in bolt kit RB7348.
Mounting Bush (End);
Standard (4) - TKC6097
Washer+ (2) - WC112081
Uprated (Hard) (4) - TKC6097H
Nut-Locking+ (2) - NY112041
Split Pin+ (2) - 146974
Front Suspension
Stub Axle/Strut Insert Tube;
Right Hand - CAX2100
Tie Rod Lever-Steering* (Rh) - TKC3776
Left Hand - CAX2101
Tie Rod Lever-Steering* (Lh) - TKC3777
*Track rod ends locate to this lever.
Bolt (2) (Tie rod lever to stub axle) - UKC9570
Washer-Spring (2) - WL112001
Track Arm Assembly;
Arms include ball joint & bush.
Mounting Bush;
Right Hand (New) - TKC878
Right Hand (Reconditioned) - TKC878R
Left Hand (New) - TKC879
Left Hand (Reconditioned) - TKC879R
Standard (2) - CRC1709
Bolt (2) - BH112151
Uprated (Hard) (2) - CRC1709H
Track arm mounting.
Nut-Locking (2) - NY112041
Ball Joint Assembly (2) - GSJ154
Inc boot/dust cover, less circlip.
Circlip (Ball joint to arm) - (NI) -
133634
Dust Cover/Boot (2) - UKC3466
Washer-Plain (2) - WC112081
Nut (Castle Head) (2) - LN2211
Split Pin (2) - PC20
Shield (2) (Brake disc) - RKC802
Setscrew (6) - FAW8102
Shield to stub axle.
Front Hub Bearing Kit (2) - (NI) -
GHK1004
Kit is per WHEEL & includes; 1 of each bearing GHB101/GHB107, and 1 inner hub seal GHS126.
Multi Purpose Grease (400g tube) - (NI) -
GGL111
Hub Seal-Inner (2) - GHS126
Bearing-Inner (2) - GHB101
Front Hub Assembly (2) - UKC7310
Wheel Studs (8) - UKC2213
Bearing-Outer (2) - GHB107
'D' Washer (2) - UKC1145
Nut (2) (Hub adjusting) - 21H5128
Retainer (For 21H5128 nut) - 21H5129
Split Pin (2) - PC20
Grease Cap (2) - 2A4067
Front Suspension
Strut Insert (Shock absorber);
SAFETY NOTE: we recommend fitting strut inserts in pairs.
Standard Insert* (2) - GSA2024
Spax Insert* (2) (Heavy Duty) - GSA2024SPAX
Spax Insert TA2* (2) - GSA2024SPAXTA2
On Car Adjustable.
Koni Insert* (2) (Off Car Adjustable) - GSA2024KONI
*See also; Shock Absorber & Spring Packages.
Fully Assembled & Ready to Fit Comprises: Stub Axle/Tube, Strut Insert (Shock Absorber), Spring, Gaiter, Top Mounting etc.
Right Hand Leg Assembly;
New (Standard) - RB7064
Front Spring;
Reconditioned (Standard) - RB7064R
New (Standard) - RB7063
Reconditioned (Standard) - RB7063R
Standard* (2) (Fit in pairs) - TKC1328
Spring Compressor Tool - (NI) -
RX1328
Uprated* (2) - TKC1328UR
Uprated to 200Lb, 1" lowered ride height. Uprated springs should only be fitted in vehicle sets, 2 front & 2 rear.
Spring Insulator Rubber (2) (Upper) - UKC5615
Spring Insulator Rubber (2) (Lower) - UKC628
Strut Gaiter (2) - UKC4981
Tie Strap (2) (Gaiter) - BMK1900
Bump Stop (2) - UKC1101
Bump stop UKC1101 should be shortened when fitting TKC1328UR lowered springs.
Spring Pan-Upper (2) - UKC5042
Thrust Collar (Nylon) (2) - UKC329
Sealing Washer (Rubber) (2) - ULC2043
Thrust Washer (Steel) (2) - UKC9395
Mounting Cone (2) - UKC7495
Mounting-Top (2) - TKC1205
Nut-Locking (6) - GHF252
Washer (6) - RTC610A
Cup-Top Mount Locating (2) - ULC2435
Nut-Locking (2) - NY112041
Strut insert retaining.
Dust Cover (Turret) (2) - ZKC804
Return to TR7 Index Page 
Home About Rimmer Bros. Prices General Info Delivery How to Order Your Order Form News Restoration Projects Picture Library Triumph Links Free Catalogue Contact Us
The 'Triumph', 'Rover' and 'British Motor Heritage' Logos used herein are Registered Trade Marks of British Motor Heritage Ltd,
and are used with their Licence under the Special 'Heritage' approval Scheme.
All original part numbers & illustrations have been reproduced by kind permission of British Motor Heritage.